| ITEM | DESCRIPTION | MODEL | UNIT | QTY |
| 1 | DRAWWORKS AND ACCESSORIES (API SPEC 7K) |
|
|
|
| 1.1 | DRAWWORKS, 2000HP | JC70D | SET | 1 |
| 1.2 | DRAWWORKS DC MOTOR, 1070HP (800KW) |
| SET | 2 |
| 1.3 | HYDRAULIC DISC BRAKE |
| SET | 1 |
| 1.4 | AUXILIARY BRAKE: WATER COOLING EDDY CURRENT BRAKE |
| SET | 1 |
| 1.5 | DRILLER CABIN |
| SET | 1 |
| 1.6 | AUTOMATIC DRILLER |
| SET | 1 |
| 1.7 | DRAWWORKS CONTROL CONSOLE |
| SET | 1 |
| 1.8 | INDEPENDENT 40M3 BRAKE WATER TANK | FC-40 | SET | 1 |
|
|
|
|
|
| 2 | MAST AND ACCESSORIES(API SPEC 4F) |
|
|
|
| 2.1 | MAST, 1,000,000LBS, 152FT (450MT, 46.5M) | JJ450/46.5-K | SET | 1 |
| 2.2 | CROWN BLOCK, 1,000,000LBS (450MT) | TC450 | SET | 1 |
| 2.3 | MONKEY BOARD |
| SET | 1 |
| 2.4 | CASING STABBING BOARD |
| SET | 1 |
| 2.5 | DEADLINE ANCHOR |
| SET | 1 |
| 2.6 | ESCAPE DEVICE |
| SET | 1 |
| 2.7 | CLIMBING AID DEVICE |
| SET | 1 |
| 2.8 | MONKEY BOARD WINCH 1,100LBS(0.5MT) |
| SET | 2 |
|
|
|
|
|
| 3 | SUBSTRUCTURE AND ACCESSORIES(API SPEC 4F) |
|
|
|
| 3.1 | SUBSTRUCTURE, 1,000,000LBS, 34.5FT (450MT, 10.5M) | DZ450/10.5-X | SET | 1 |
| 3.2 | DOG HOUSE |
| SET | 2 |
| 3.3 | CATWALK AND 8 PCS PIPE RACK |
| SET | 1 |
| 3.4 | BOP HANDLING SYSTEM, 110,000LBS (50MT) |
| SET | 1 |
| 3.5 | HYDRAULIC CATHEAD , 35,000LBS (160KN) |
| SET | 2 |
| 3.6 | AIR WINCH, 11,000LBS (5MT) |
| SET | 3 |
| 3.7 | HYDRAULIC ELEVATOR, 3,300LBS (1.5MT) |
| SET | 1 |
| 3.8 | STAIRWAY, V-DOOR, HANDRAIL, RAT/MOUSE HOLE AND CABLE TRAYS, |
| SET | 1 |
| 3.9 | HYDRAULIC BUFFER RAM |
| SET | 1 |
|
|
|
|
|
| 4 | HOISTING AND ROTARY EQUIPMENT |
|
|
|
| 4.1 | TRAVELING BLOCK, 1,000,000LBS (450MT) | YC450 | SET | 1 |
| 4.2 | HOOK, 1,000,000LBS (450MT) | DG450 | SET | 1 |
| 4.3 | SWIVEL, C/W AIR KELLY SPINNER, 1,000,000LBS (450MT) | SL-450-5 | SET | 1 |
| 4.4 | ROTARY TABLE SYSTEM |
| SET | 1 |
| 4.4.1 | ROTARY TABLE, OPENING 37-1/2″ | ZP375 | SET | 1 |
| 4.4.2 | ROTARY TABLE DRIVE DEVICE |
| SET | 1 |
| 4.4.3 | ROTARY TABLE DC MOTOR, 1070HP (800KW) |
| SET | 1 |
| 4.4.4 | MASTER BUSHING C/W INSET BOWLS NO.1,2 AND 3 |
| SET | 1 |
| 4.4.5 | KELLY BUSHING ROLLER 3-1/2″, 5-1/4″ |
| SET | 1 |
| 4.4.6 | CASING BUSHING FOR 20″CASING. |
| SET | 1 |
| 4.5 | ELEVATOR LINK |
|
|
|
| 4.5.1 | 500MT, 3-1/2″ X 144″ ( 89 X3660MM) | DH-500 | PAIR | 1 |
| 4.5.2 | 350MT, 2-3/4″ X 132″ ( 70 X3300MM) | DH-350 | PAIR | 1 |
| 4.6 | DRILLING LINE, 1-1/2″X4000FT (38MM X 1200M) |
| SET | 1 |
| 4.7 | DRILLING LINE SPOOLER |
| SET | 1 |
|
|
|
|
|
| 5 | MUD PUMP AND H-PRESSURE CIRCULATING SYSTEM |
|
|
|
| 5.1 | TRIPLEX SINGLE ACTING MUD PUMP, 1600 HP,5000PSI | F-1600 | SET | 3 |
| 5.1.1 | MUD PUMP DC MOTOR, 1070HP (800KW) |
| SET | 6 |
| 5.1.2 | BELT DRIVING SYSTEM, C/W SHEAVE, BELT & COVER |
| SET | 3 |
| 5.1.3 | CHARGING PUMP, 6X8X75HP, C/W MOTOR | SB6X8-13″ | SET | 3 |
| 5.1.4 | SUCTION MANIFOLD |
| SET | 3 |
| 5.1.5 | DISCHARGE MANIFOLD |
| SET | 3 |
| 5.1.6 | MASTER SKID & AC MOTOR SKID |
| SET | 3 |
| 5.1.7 | ACCESSORIES, C/W SHEARING TYPE RELIEF VALVE, PULSATION DAMPENER, PRESSURE GUAGE,JIB CRANE, WASHING PUMP, LIGHTING |
| SET | 3 |
| 5,2 | MUD HP MANIFOLD, HP PIPE LINE AND DUAL STANDPIPE |
| SET | 1 |
| 5.2.1 | ROTARY HOSE (API SPEC 7K) | 3 1/2” 5000PI | SET | 2 |
|
|
|
|
|
| 6 | POWER PLANT, CONTROL SYSTEM AND ELECTRICITY SUPPLY |
|
|
|
| 6.1 | DIESEL GENERATORS,1757HP, 1310KW, 1900KVA, 50HZ, 1500RPM | CAT 3512B + SR4B | SET | 4 |
| 6.2 | DIESEL ENGINE GENERATORS HOUSE |
| SET | 4 |
| 6.3 | AUX. DIESEL GENERATOR. 320KW, 400V, 60HZ, 400KVA, 1500RPM | CAT C15 | SET | 1 |
| 6.4 | AUX. DIESEL GENERATOR HOUSE |
| SET | 1 |
| 6.5 | AIR COMPRESSOR,DRYER, AND AIR RECEIVER TANK |
| SET | 1 |
| 6.5.1 | SULLAIR AIR COMPRESSOR | LS12-50HH | SET | 2 |
| 6.5.2 | SULLAIR DRYER | SRC240 | SET | 1 |
| 6.5.3 | AIR RESERVOIR:2.5M3 (LOCATED IN AUX.ENGINE HOUSE) | C-2.5/1.0 | SET | 1 |
| 6.5.4 | AIR RESERVOIR:4M3 (LOCATED ON SUBSTRUCTURE) | C-4/1.3 | SET | 1 |
| 6.5.5 | COLD STARTING AIR COMPRESSOR |
| SET | 1 |
| 6.5.6 | ACCESSORIES |
| SET | 1 |
|
|
|
|
|
| 7 | POWER CONTROL SYSTEM & LIGHTING SYSTEM |
|
|
|
| 7.1 | POWER CONTROL SYSTEM(SCR/MCC) |
| SET | 1 |
| 7.2 | RIG LIGHTING AND ELECTRICAL SUPPLY SYSTEM |
| SET | 1 |
|
|
|
|
|
| 8 | MUD L-PRESSURE CIRCULATING AND SOLID CONTROL EQUIPMENTS |
| SET | 1 |
| 8.1 | MUD TANKS, 2000BBL TOTAL CAPACITY | ZJ70D | SET | 5 |
| 8.2 | SOLID CONTROL EQUIPMENTS |
|
|
|
| 8.2.1 | SHALE SHAKER |
| SET | 2 |
| 8.2.2 | MUD CLEANER, C/W DESNADER AND DESILTER |
| SET | 1 |
| 8.2.3 | CENTRIFUGE |
| SET | 1 |
| 8.2.4 | DESANDER & DESILTER PUMPS, 75HP (55KW) |
| SET | 2 |
| 8.2.5 | VACUUM DEGASSER |
| SET | 1 |
| 8.2.6 | MIXING PUMP, 75HP (55KW) |
| SET | 2 |
| 8.2.7 | TRIP TANK PUMP, 20HP (15KW) |
| SET | 2 |
| 8.2.8 | AGITATOR, 15HP (11KW) |
| SET | 15 |
| 8.2.9 | MUD GUNS, 3″ |
| SET | 9 |
| 8.2.10 | POOR-BOY DEGASSER |
| SET | 1 |
| 8.2.11 | PIPE WORK, STAIRWAY, WALK WAY, HANDRAIL AND OTHER ACCESSORIES |
| SET | 1 |
|
|
|
|
|
| 9 | TANK AREA |
|
|
|
| 9.1 | 3000BBL CYLINDER FUEL TANK, C/W 30BBL DAILY TANK |
| SET | 1 |
| 9.2 | 450BBL CYLINDER FUEL TANK |
| SET | 1 |
| 9.3 | 500BBL WATER TANK |
| SET | 2 |
|
|
|
|
|
| 10 | BOP SYSTEM |
|
|
|
| 10.1 | 13.5/8″ 10,000PSI DOUBLE RAM BOP, CAMERON U TYPE WITH STANDARD BONNET BOLTS MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A.
– TOP CONNECTION: FLANGED 13.5/8″ 10,000PSI WP BX-159
– BOTTOM CONNECTION: FLANGED 13.5/8″ 10,000PSI WP BX-159
– STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS AND ALL SIDE OUTLETS.
– SIDE OUTLETS: QTY 4 STUDDED 4.1/16″ 10,000PSI WP
– TEMPERATURE CLASS:T-20
– RAM SUB ASSEMBLY:
UPPER: 5″TO 3-1/2″ VBR.
LOWER: BLIND RAM | 13-5/8″10,000 PSI DOUBLE RAM BOP | SET | 1 |
| 10.2 | 9 5/8” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP |
| SET | 1 |
| 10.3 | 5-1/2” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP |
| SET | 1 |
| 10.4 | 7” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP |
| SET | 1 |
| 10.5 | 13-5/8″10,000 PSI SINGLE RAM BOP, CAMERON U TYPE WITH STANDARD BONNET BOLTS MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A.
– TOP CONNECTION: FLANGED 13-5/8″10,000 PSI WP BX-159
– BOTTOM CONNECTION: FLANGED 13-5/8″10,000 PSI WP BX-159
– STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS AND ALL SIDE OUTLETS.
– SIDE OUTLETS: QTY 2 STUDDED 3.1/16″ X 10,000PSI WP
– TEMPERATURE CLASS:T-20
– RAM SUB ASSY, 5″ PIPE RAM | 13-5/8″10,000 PSI SINGLE RAM BOP | SET | 1 |
| 10.6 | 2 7/8” PIPE RAM ASSEMBLY FOR 13 5/8″ X 10,000PSI RAM BOP |
| SET | 1 |
| 10.7 | 3-1/2” PIPE RAM ASSEMBLY FOR 13 5/8″ X 10,000PSI RAM BOP |
| SET | 1 |
| 10.8 | 13 5/8″ X 5,000PSI ANNULAR BOP, SHAFFER TYPE MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A. TOP CONNECTION: STUDDED 135/8″ X 5,000PSI WP BX-160, BOTTOM CONNECTION: FLANGED 135/8″ X 10,000PSI WP BX-159, STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS, TEMPERATURE CLASS:T-20 | 13 5/8″ X 5,000PSI ANNULAR BOP | SET | 1 |
| 10.9 | CHOKE MANIFOLD, 31/16” X 10,000PSI, EE, PSL3, PR1, U, CONSIST OF:
ONE EA SKID;
TWO EA FLANGE SPOOL, 3 1/16″ 10000PSI FLANGE END, 508MM LENGTH;
TWO EA FLANGE SPOOL, 3 1/16″ 10000PSI FLANGE END, 1349MM LENGTH;
THREE STUDDED CROSS, 4 X 3 1/16″ 10000PSI;
ONE EA STUDDED CROSS (5 WAY), 4 X 3 1/16″ X 2 1/16″ 10000PSI;
ONE EA GATE VALVE 2 1/16″ 10000PSI FLANGE END;
ONE EA ADJUSTABLE CHOKE VALVE, 3 1/16″ 10000PSI FLANGE END, HYDRAULIC OPERATED;
ONE EA ADJUSTABLE CHOKE VALVE 3/16″ 10000PSI FLANGE END, MANUAL OPERATED;
ELEVEN EA GATE VALVE, 3 1/16″ 10000PSI FLANGE END. | CHOKE MANIFOLD, 31/16” X 10,000PSI | SET | 1 |
| 10.10 | CONTROL PANEL FOR CHOKE MANIFOLD, |
| SET | 1 |
| 10.11 | CHOKE LINE, 31/16” X 10,000PSI FLANGED END CONNECT, 3M LENGTH |
| SET | 2 |
| 10.12 | KILL MANIFOLD, 31/16” X 10,000PSI, EE, PSL3, PR1, U, CONSIST OF:
ONE EA SKID;
ONE EA SKID;
ONE EA NEEDLE VALVE, 1/2″ NPT FEMALE X MALE THREAD CONNECTION;
ONE EA PRESSURE GAUGE, 0-10000PSI, 4 1/2″ FACE;
ONE EA ADAPTER FLANGE WITH 3″ 1502 FEMALE UNION;
ONE EA STUDDED CROSS (5 WAY), 4 X 3 1/16″ X 2 1/16″ 10000PSI;
ONE EA CHECK VALVE 3 1/16″ 10000PSI FLANGE END;
ONE EA GATE VALVE 2 1/16″ 10000PSI FLANGE END;
TWO EA GATE VALVE 3 1/16″ 10000PSI FLANGE END. | KILL MANIFOLD, 31/16” X 10,000PSI | SET | 1 |
| 10.13 | KILL LINE, 31/16” X 10,000PSI FLANGED END CONNECT, 3M LENGTH |
| SET | 2 |
| 10.14 | BOP HYDRAULIC CLOSING UNIT, MODEL IS FKQ640-6
BOP CONTROL UNIT WITH AIR ACTUATED ACCUMULATOR SYSTEM, 3,000 PSI WP, CONSISTING OF :
– SIXTEEN (16) ACCUMULATOR BOTTLES (LOW-TEMPERATURE), WITH VOLUME 40L EACH, WITH 2″ PORTS, COMPLETE WITH ISOLATION VALVES ON EACH BOTTLE ;
– CONTROLLED OBJECTS: SIX (6)
– ONE (1) 3/4″ X 3300 PSI RELIEF VALVE ;
– ONE (1) 1″ BYPASS VALVE (TO GO FROM MANIFOLD PRESSURE TO ACCUMULATOR PRESSURE QUICK);
– ONE (1) TRIPLEX PLUNGER PUMP, COMPLETE WITH EXPLOSION-PROOF E/MOTOR;
– ONE (2) REMOTE CONTROL PANEL C/W 150FT CONTROL HOSES – DRILLER’S PANEL
– TWO (2) EXTERNAL ACCUMULATOR MANIFOLDS;
– HYDRAULIC CLOSING UNIT MOUNTED ON HEAVY-DUTY SKIDS. | BOP HYDRAULIC CLOSING UNIT FKQ640-6 | SET | 1 |
| 10.15 | 20′ LONG SUITCASE WITH 12 EACH 3000 PSI I” STEEL HYDRAULIC LINES TO CONNECT ACCUMULATOR UNIT TO BOPS ONE, (1 ) EACH 2″ AIR LINE WITH FIG 200 UNION, C/W UNIVERSAL JOINT, HAMMER UNION |
| SET | 3 |
| 10.16 | 36 EACH 3M LONG 1″AMOURED HOSE 3000PSI |
| JT | 36 |
| 10.17 | 12 EACH 10M LONG 1″ AMOURED HOSE, 3000 PSI |
| JT | 12 |
| 10.18 | DRILLING SPOOL, 13 5/8″ 10,000PSI BX-159 FLANGED TOP X 13 5/8″ 10,000PSI BX-159 FLANGED BOTTOM, WITH 2 EACH 31/16” X 10,000PSI FLANGED OUTLETS | DRILLING SPOOL, 13 5/8″ 10,000PSI | EA | 1 |
| 10.19 | 31/16” X 10,000PSI GATE VALVE, MANUAL OPERATION
31/16” X 10,000PSI GATE VALVE, HYDRAULIC OPERATION |
| SET | 1 |
| 10.20 | 31/16” X 10,000PSI GATE VALVE, MANUAL OPERATION
31/16” X 10,000PSI GATE VALVE, HYDRAULIC OPERATION
31/16” X 10,000PSI CKECK VALVE |
| SET | 1 |
| 10.21 | HIGH PRESSURE TEST PUMP UNIT, PNEUMATICALLY OPERATED MINIMUM 20,000PSI WORKING PRESSURE, EQUIPPED WITH CHART RECORDER, PRESSURE HOSES | HIGH PRESSURE TEST PUMP UNIT | SET | 1 |
| 10.22 | TEST STUMP FOR 13-5/8″ 10,000PSI BOP WITH 5″ IF FEMALE THREAD |
| SET | 1 |
| 10.23 | TEST STUMP FOR 21-1/4″ 2,000PSI BOP WITH 5″ IF FEMALE THREAD |
| SET | 1 |
| 10.24 | DROP IN VALVES
DROP IN CHECK VALVES: 5000PSI DROP IN VALVE FOR 5″ D.P(OD 6-1/2″,CONN.4-1/2IF BOX&PIN) |
| SET | 1 |
|
|
|
|
|
| 11 | DRILLING INSTRUMENTATION |
|
|
|
| 11.1 | INCLUDING SENSORS, DISPLAY SYSTEM, DATA ACQUISITION SYSTEM, RECORDING SYSTEM, MOUNTING ACCESSORIES, HYDRAULIC HOSE, CABLES AND FITTINGS, KITS | ZCJY | SET | 1 |
|
|
|
|
|
| 12 | TOP DRIVE |
|
|
|
| 12.1 | TOP DRIVE, 1,000,000LBS (500TON) | DQ-70LHTY1 | SET | 1 |
|
|
|
|
|
| 13 | SAFETY EQUIPMENTS |
|
|
|
| 13.1 | H2S DETECTOR SYSTEM |
|
|
|
| 13.1.1 | MSA TWO CHANNEL CONTROLLER UNITE MODEL 9020 WITH LCD 4~20MA & RELAY OUTLET，ONE 9020 CAN BE CONNECTED WITH TWO DETECTORS | MSA 9020 | EA | 4 |
| 13.1.2 | MSA MODEL 9020-10 WALL CONTROL CABINET,ONE CABINET CAN SET 5 9020 CONTROL UNITES | MSA 9020-10 | EA | 1 |
| 13.1.3 | MSA MODEL ULTIMA-XE-H2S TOXIC GAS DETECTOR(EXP) WITH LCD DISPLAY ,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT | MSA ULTIMA-XE-H2S | EA | 4 |
| 13.1.4 | MSA MODEL ULTIMA-XE-LEL COMBUSTIBLE GAS DETECTOR(EXP) WITH LCD DISPLAY,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT,ULTIMA-XE-H2S | MSA ULLTIMA-XE-LEL | EA | 4 |
| 13.1.5 | DIGITIAL POWER FOR ALARMER,5A@24VDC,AND BE SET IN CONTROL CABINET | DIGITIAL POPWER 24 VDC | EA | 1 |
| 13.1.6 | 3 LINE SHIELD CABLE RPPV3X1.5 | CABLE3X1.5 | M | 1200 |
| 13.1.7 | CALIBRATION KITS FOR 10PPM H2S ,INLUDING CALIBRATION GAS BOTTLE AND FLOW VALVE | CALIBRATION KIT | SET | 1 |
| 13.1.8 | ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) | ALARMER(RED LAMP) | SET | 1 |
| 13.1.9 | ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) | ALARMER(YELLOW LAMP) | SET | 1 |
| 13.1.10 | MSA MADULE PORTABLE INSTRUMENT MODEL ORION PLUS EX-O2-SO2-H2S-CO2,WITH GAS PUMP | MSA PORTABLE INSTRUMENT | SET | 2 |
| 13.1.11 | MSA PORTABLE INSTRUMENT MODEL ALTAIR-PRO FOR H2S | MSA ALTAIR-PRO | SET | 4 |
| 13.1.12 | MSA PORTABLE INSTRUMENT MODEL ALTAIR PRO FOR SO2 | MSA ALTAIR-PRO | SET | 2 |
| 13.1.13 | CALIBRATION GAS | CALIBRATON GAS | SET | 2 |
| 13.1.14 | FLOW VALVE | 0.25L/MIN | SET | 2 |
| 13.1.15 | ONE AIR PURITY TESTING KIT. | MSA9920243 | SET | 1 |
| 13.1.16 | CHARGE PUMP
100L/MIN
MOTOR: 2..2KW, 400V 3 PHASES
GRP COOLING | MSA100EFI | SET | 1 |
| 13.1.17 | SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE, MINIMUM 30 MINUTES, CYLINDER PRESSURE 200 BAR, WITH CASE. | MSA | SET | 8 |
| 13.1.18 | EMERGENCY ESCAPE SETS, SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE 5 MINUTES, CYLINDER PRESSURE 200 BAR, HANSEN FITTING FOR CONNECTION TO AIR LINE SYSTEM. | MSA9920005-1 | SET | 6 |
| 13.1.19 | PORTABLE GASOLINE DRIVEN RECHARGE COMPRESSOR, COMPLETE AND CERTIFIED. 100PFI | MSA-9960029 | SET | 1 |
| 13.1.20 | MOBILE BOTTLE |
| EA | 4 |
| 13.2 | FIRE SAFETY EQUIPMENTS |
|
|
|
| 13.2.1 | FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 50KG WHEELED | ABS DRY CHEMICAL, 50KG WHEELED | SET | 4 |
| 13.2.2 | FIRE EXTINGUISHER FOR MAIN CAMP
CO2, 5KG | CO2, 5KG | SET | 12 |
| 13.2.3 | FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 8KG | ABS DRY CHEMICAL, 8KG | SET | 60 |
| 13.2.4 | FIRE PUMP SYSTEM |
| SET | 2 |
| 13.2.5 | FIRE HOSE 300M |
| SET | 1 |
| 13.2.6 | FIRE FIGHTING OUTFITS |
| SET | 4 |
| 13.3 | SAFETY BELT |
| SET | 6 |
| 13.4 | OTHER SAFETY EQUIPMENTS |
| SET | 1 |
| 13.4.1 | EYEWASH STATION |
| EA | 4 |
| 13.4.2 | SHOWER STATION |
| SET | 2 |
| 13.4.3 | HEARING PROTECTION |
| PAIR | 200 |
| 13.4.4 | HARD HAT |
| EA | 80 |
| 13.4.5 | SAFETY BOOTS |
| PAIR | 80 |
| 13.4.6 | GLOVE |
| SET | 100 |
| 13.4.7 | FIRST AID BOX |
| SET | 2 |
|
|
|
|
|
| 14 | CAMPS |
|
|
|
| 14.1 | OFFICE |
| SET | 2 |
| 14.2 | 2 MEN ROOM |
| SET | 3 |
| 14.3 | 4 MEN BEDROOM |
| SET | 4 |
| 14.4 | 8 MEN BEDROOM |
| SET | 6 |
| 14.5 | CLINIC |
| SET | 1 |
| 14.6 | KITCHEN FOR JUNIOR STAFF |
| SET | 1 |
| 14.7 | RECREATION ROOM FOR JUNIOR STAFF |
| SET | 1 |
| 14.8 | KITCHEN FOR SENIOR STAFF |
| SET | 1 |
| 14.9 | RECREATION ROOM FOR SENIOR STAFF |
| SET | 1 |
| 14.10 | LAUNDRY |
| SET | 1 |
| 14.11 | DRY STORES |
| SET | 1 |
| 14.12 | FREEZER/REEFER |
| SET | 1 |
| 14.13 | PRAYING ROOM |
| SET | 1 |
| 14.14 | ABLUTIONS (SINKS , SHOWERS ,TOILETS) |
| SET | 1 |
| 14.15 | PORTABLE WATER TANK |
| SET | 1 |
| 14.16 | FUEL TANK |
| SET | 1 |
| 14.17 | DIESEL GENERATOR. 320KW, 400V, 60HZ, 400KVA, 1500RPM | CAT C15 | SET | 2 |
| 14.18 | DIESEL GENERATOR HOUSE |
| SET | 1 |
|
|
|
|
|
| 15 | TUBULAR |
|
|
|
| 15.1 | DRILL PIPE |
|
|
|
| 15.1.1 | DRILL PIPE 5″ FRICTION WELDED
-WEIGHT: 19.5 PPF
-GRADE: G-105
-WALL THICKNESS: 0.362″
-TOOL JOINT OD: 6 5/8″
-TOOL JOINT ID: 3 1/4″
-UPSET TYPE: IEU
-PIN TONG SPACE: 7”
-BOX TONG SPACE: 10″ +3″ HARDBANDING
-TAPER SHOULDER: 18 DEGREE
-CONNECTION: NC50(4 1/2″ IF)
-LENGTH RANGE: R2
-WITH ARNCO-100XT HARDBANDING AND TK34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION | DRILL PIPE 5″ G-105 | M | 5000 |
| 15.1.2 | DRILL PIPE 3 1/2″ FRICTION WELDED
-WEIGHT: 13.3 PPF
-GRADE: G-105
-WALL THICKNESS: 0.368″
-TOOL JOINT OD: 5″
-TOOL JOINT ID: 2 7/16″
-UPSET TYPE: EU
-PIN TONG SPACE: 8″
-BOX TONG SPACE: 10 1/2″ + 3” HARDBANDING
-TAPER SHOULDER: 18°
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH RANGE: R2 (9.45M-9.75M)
-WITH ARNCO-100XT HARDBANDING AND TX34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION | DRILL PIPE 3 1/2″ G-105 | M | 3000 |
| 15.2 | HWDP |
|
|
|
| 15.2.1 | 5″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-CENTER UPSETS OD: 5 1/2″, CENTER UPSETS ENDS: 5 1/8″
-CENTER UPSET LENGTH: 24″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CONNECTION: NC50 (4 1/2″ IF)
-TOOL JOINT OD: 6 1/2″, ID: 3″
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS. | HWDP 5” | JT | 50 |
| 15.2.2 | 3 1/2″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-WEIGHT: 25.3 LBS/FT
-CENTER UPSETS OD: 4″, CENTER UPSETS ENDS: 3 5/8″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CENTER UPSET LENGTH: 24″
-TOOL JOINT OD: 4 3/4″, ID: 2 1/16″
-CONNECTION: NC38 (3 1/2″ IF)
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
-WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ -WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS | HWDP 3-1/2” | JT | 15 |
| 15.3 | DRILL COLLAR |
|
|
|
| 15.3.1 | 9-1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 3″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION:7-5/8 REG
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 9-1/2″ SPIRAL DRILL COLLAR | JT | 15 |
| 15.3.2 | 8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: 6 5/8″ REG
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 8″ SPIRAL DRILL COLLAR | JT | 24 |
| 15.3.3 | 6 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 30 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 50 (4 1/2″ IF)
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 6 1/2″ SPIRAL DRILL COLLAR | JT | 30 |
| 15.3.4 | 4 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 1/4″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC38
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 4 3/4″ SPIRAL DRILL COLLAR | JT | 18 |
| 15.4 | DRILL PIPE PUP JOINT |
|
|
|
| 15.4.1 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 5 FT |
| JT | 1 |
| 15.4.2 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 10 FT |
| JT | 1 |
| 15.4.3 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 15 FT |
| JT | 1 |
| 15.4.4 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 5 FT |
| JT | 1 |
| 15.4.5 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 10 FT |
| JT | 1 |
| 15.4.6 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 15 FT |
| JT | 1 |
| 15.5 | CROSSOVER SUB |
|
|
|
| 15.5.1 | 6 5/8 REG BOX X 7-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.2 | 4-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.3 | 3-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.4 | 3-1/2 IF BOX X 4-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.5 | 4-1/2 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.6 | 2-7/8 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.7 | 3-1/2 IF BOX X 2-7/8 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.6 | BIT SUB |
|
|
|
| 15.6.1 | 9 1/2″ O.D X 3″ I.D BIT SUB 6 5/8″ REG BFF BOX X 7 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 5F-6R |
| EA | 2 |
| 15.6.2 | 8 1/2″ O.D X 3″ I.D BIT SUB 6 5/8″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 5F-6R |
| EA | 2 |
| 15.6.3 | 8 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 15.6.4 | 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 15.6.5 | 6 1/2″ O.D X 1 3/4″ I.D BIT SUB 3 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 2F-3R |
| EA | 2 |
| 15.6.6 | 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 3 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 15.7 | KELLY |
|
|
|
| 15.7.1 | 5 1/4“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 6 3/8″
-CONNECTION: NC50( 4 1/2″ IF)
-BORE SIZE 3 1/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J | 5 1/4“ HEX KELLY | EA | 1 |
| 15.7.2 | 3-1/2“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 4-1/8″
-CONNECTION: NC31( 2 7/8″ IF)
-BORE SIZE 1 3/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J | 3-1/2“ HEX KELLY | EA | 1 |
| 15.8 | KELLY COCK, KELLY SAVER SUB & SAFETY VALVES |
|
|
|
| 15.8.1 | UPPER KELLY COCK,10000PSI W.P. WITH 6-5/8 REG LH CONN. | UPPER KELLY COCK | EA | 2 |
| 15.8.2 | LOWER KELLY COCK,10000PSI W.P. WITH 4-1/2IF CONN. | LOWER KELLY COCK | EA | 2 |
| 15.8.3 | LOWER KELLY COCK,10000PSI W.P. WITH 2-7/8IF CONN. |
| EA | 2 |
| 15.8.4 | KELLY SAVER SUB OD 6-3/8″ CONNECTION 4-1/2 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR | KELLY SAVER SUB | EA | 2 |
| 15.8.5 | KELLY SAVER SUB OD 4-1/8″ CONNECTION 2-7/8 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR |
| EA | 2 |
| 15.8.6 | FULL OPENING SAFETY VALVE 10,000PSI WP
–FOR 5″ DRILL PIPE WITH 4-1/2IF CONN. | SAFETY VALVE | EA | 1 |
| 15.8.7 | FULL OPENING SAFETY VALVE
10,000PSI WP
-FOR 3-1/2″ DRILL PIPE WITH 3-1/2 IF CONN. |
| EA | 1 |
|
|
|
|
|
| 16 | DRILLING TOOLS |
|
|
|
| 16.1 | ELEVATORS |
|
|
|
| 16.1.1 | CASING SLIP TYPE ELEVATOR/SPIDER, 350 TON 4-1/2″ TO 13 /3/8″ AIR OPERATED OPERATED, VARCO STYLE
2 EA BODY ASSEMBLY COMPLETE, WITH AIR SUPLLY HOSE ASSEMBLIES AIR OPERATED ,
1 EA CASING GUIDE BELL ASSEMBLY
1 EA SPIDER ADAPTER PLATE 27-1/2″
1 SET 5″INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 5 1/2″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 5 1/2″
2 SET SLIP ASSEMBLY5 1/2″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 7″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 7″
2 SET SLIP ASSEMBLY 7″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY.FOR 9-5/8″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 9-5/8″
2 SET SLIP ASSEMBLY 9-5/8″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 13-3/8″
1 EA ELEVATOR GUIDE PLATE ASSY.FOR 13-3/8″
2 SET SLIP ASSEMBLY 13-3/8″ WITH INSERTS |
| SET | 2 |
| 16.1.2 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 20″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.3 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 13-3/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.4 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-5/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.5 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 7″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.6 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5 1/2″” CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.7 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5″ CASING(LINER), MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.8 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-1/2″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.9 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 8-1/4″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.10 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 6-1/2″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.11 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 4-3/4″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.12 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 3-1/2″ DRILL COLLAR, MODEL TA100, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.13 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.14 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL GG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 350TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.15 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 3-1/2″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.16 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 2-3/8″ DRILL PIPE, MODEL MG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 16.1.17 | ELEVATORS (COMPLETE) FOR 20″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 16.1.18 | ELEVATORS (COMPLETE) FOR 13-3/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 16.1.19 | ELEVATORS (COMPLETE) FOR 9-5/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 16.1.20 | ELEVATORS (COMPLETE) FOR 7″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 16.1.21 | ELEVATORS (COMPLETE) FOR 5-1/2″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 7A STANDARD |
| SET | 1 |
| 16.1.22 | ELEVATORS (COMPLETE) FOR 5″CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 16.2 | POWER TONG |
|
|
|
| 16.2.1 | ZQ127/25Y POWER TONG
PIPE SIZE RANGE OF MASTER TONG 2 3/8″-5 1/2″
HIGH GEAR RATED TORQUE 5100 N.m
LOW GEAR RATED TORQUE 25000 N.m
HIGH GEAR RATED SPEED ≤65 R/MIN
LOW GEAR RATED SPEED ≤10 R/MIN
RATED OPERATION PRESSURE 16MPa
MAX.FLOW 32 GPM
PNEUMATIC OPERATION PRESSURE 0.5-0.9 MPa SIZE 1250*780*1000
WEIGHT (INCLUDING BACKUP TONG) 730KG |
| SET | 1 |
| 16.2.2 | TQ340-35Y POWER CASING TONG
SIZE RANGE:4 1/2″-13 3/8″
MAX PRESSURE: 3045 PSI
WORKING FLOW: 29.3- 45.4 GPM
HIGH GEAR TORQUE: 2950-4130 FT.LBF
LOW GEAR TORQUE: 19175-25960 FT.LBF
HIGH GEAR SPEED: 57-95 RPM
LOW GEAR SPEED: 9-15. RPM
SIZE: 62.2″ X 35.4″ X 33.9″
WEIGHT: 1670 LB |
| SET | 1 |
| 16.2.3 | TQ508-70Y POWER CASING TONG
SIZE RANGE: 9 5/8″-20″(245-508mm)
MAX PRESSURE: 3045 PSI
WORKING FLOW: 35 GPM
HIGH GEAR TORQUE: 7000FT.LBS
LOW GEAR TORQUE: 50000 FT.LBS
HIGH GEAR SPEED: 23 RPM
LOW GEAR SPEED: 3. RPM
SIZE: 81″ X 48″ X 27″(2050X1220X690MM)
WEIGHT: 3200LB(1450KG) |
| SET | 1 |
| 16.3 | BIT BREAKER |
|
|
|
| 16.3.1 | BIT BREAKER FOR 26” |
| EA | 1 |
| 16.3.2 | BIT BREAKER FOR 17 1/2” |
| EA | 1 |
| 16.3.3 | BIT BREAKER FOR 12-1/4” |
| EA | 1 |
| 16.3.4 | BIT BREAKER FOR 8-1/2” |
| EA | 1 |
| 16.3.5 | BIT BREAKER FOR 6” |
| EA | 1 |
| 16.4 | SLIPS |
|
|
|
| 16.4.1 | SLIPS (COMPLETE) FOR 20″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5329 ,MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.2 | SLIPS (COMPLETE) FOR 13.3/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5313, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.3 | SLIPS (COMPLETE) FOR 9.5/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5307, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.4 | SLIPS (COMPLETE) FOR 7″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5301, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.5 | SLIPS (COMPLETE) FOR 5.1/2″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.6 | SLIPS (COMPLETE) FOR 9-1/2″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 8-1/2″ TO 10″), BUTTON TYPE DIES, PART NUMBER 2530, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.7 | SLIPS (COMPLETE) FOR 8.1/4″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 6.3/4″ TO8.1/4″), BUTTON TYPE DIES, PART NUMBER 2503, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.8 | SLIPS (COMPLETE) FOR 6-1/2″ DRILL COLLAR, MODEL DCS-R (SIZE RANGE 5-1/2″ TO 7″), BUTTON TYPE DIES, PART NUMBER 2550, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.9 | SLIPS (COMPLETE) FOR 4 3/4″DRILL COLLAR, MODEL DCS-R (SIZE RANGE 4-1/2″ TO 6″), BUTTON TYPE DIES, PART NUMBER 2552 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.10 | SLIPS (COMPLETE) FOR 3 1/5″DRILL COLLAR, MODEL DCS-S (SIZE RANGE 3″ TO 4″), BUTTON TYPE DIES, PART NUMBER 2572, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 16.4.11 | SLIPS (COMPLETE) FOR 5″ DRILL PIPE, SLIP BODY SIZE 5-1/2″, MODEL SDXL, PART NUMBER 15520, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 16.4.12 | SLIPS (COMPLETE) FOR 3.1/2″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15522, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 16.4.13 | SLIPS (COMPLETE) FOR 2.7/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15523 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 16.4.14 | SLIPS (COMPLETE) FOR 2.3/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15524 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 16.5 | SAFETY CLAMP |
|
|
|
| 16.5.1 | SAFETY CLAMP FOR 9-1/2″ TO 10-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 16.5.2 | SAFETY CLAMP FOR 8-1/2″ TO 9-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 16.5.3 | SAFETY CLAMP FOR 6-1/2″ TO 7-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 16.5.4 | SAFETY CLAMP FOR 4-1/2″ TO 5-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 16.5.5 | SAFETY CLAMP FOR 3-1/2″ TO 4-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 16.6 | MANUAL TONG |
|
|
|
| 16.6.1 | 1 SET (2 EACH) MANUAL TONG FOR 2-3/8″ TO 3-1/2″ DRILLING AND CASING TUBULARS, MODEL HT35-C WITH LUG JAWS FOR FULL SIZE, MAXIMUM RATED CAPACITY 35,000FTLBS |
| SET | 1 |
| 16.6.2 | 1 SET (2 EACH) MANUAL TONG FOR 3 1/2″ TO 13 3//8″ DRILLING AND CASING TUBULARS, MODEL B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 55,000FTLBS |
| SET | 1 |
| 16.6.3 | 1 SET (2 EACH) MANUAL TONG FOR 13-3/8″ TO 20″ DRILLING AND CASING TUBULARS, MODEL HT25 -B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 25,000FTLBS |
| SET | 1 |
| 16.7 | STABILIZERS |
|
|
|
| 16.7.1 | 26″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X PIN CONN. |
| EA | 2 |
| 16.7.2 | 17-1/2″ HOLE INTEGRAL BLADE NEAR BIT STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X BOX CONN. |
| EA | 2 |
| 16.7.3 | 17-1/2″ HOLE INTEGRAL BLADE STRING TYPE STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X PIN CONN. |
| EA | 4 |
| 16.7.4 | 12-1/4″ HOLE INTEGRAL BLAND NEAR BIT TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X BOX CONN |
| EA | 2 |
| 16.7.5 | 12-1/4″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X PIN CONN |
| EA | 4 |
| 16.7.6 | 8-1/2″ HOLE INTEGRAL BLAND NEAR TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOXUP X 4-1/2 REG BOX DOWN CONN |
| EA | 2 |
| 16.7.7 | 8-1/2″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOX X PIN CONN |
| EA | 4 |
| 16.7.8 | 6″ HOLE INTEGRAL BLAND NEAR BIT STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX UP X 3-1/2 REG BOX DOWN CONN. |
| EA | 2 |
| 16.7.9 | 6″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX X PIN CONN. |
| EA | 4 |
| 16.8 | CASING THREAD PROTECTORS |
|
|
|
| 16.8.1 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 20″ CASING |
| EA | 3 |
| 16.8.2 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 13-3/8″ CASING |
| EA | 3 |
| 16.8.3 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 9-5/8″ CASING |
| EA | 3 |
| 16.8.4 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 7″ CASING |
| EA | 3 |
| 16.8.5 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5-1/2″ CASING |
| EA | 3 |
| 16.8.6 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5″ CASING |
| EA | 3 |
|
|
|
|
|
| 17 | FISHING TOOLS |
|
|
|
| 17.1 | OVERSHOT |
|
|
|
| 17.1.1 | OVERSHOT 11-1/4″ SERIES 150 FS | OVERSHOT 11-1/4″ | EA | 1 |
| 11-1/4″ X 36 EXTENSION |
| EA | 1 |
| 11-1/4″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 11-1/4″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 9-1/2″, 9″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 2X1 SET |
| EA | 2 |
| BASKET GRAPPLE 8″, 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 17.1.2 | OVERSHOT 9-5/8″ SERIES 150 FS | OVERSHOT 9-5/8″ | EA | 1 |
| 9-5/8″ X 36 EXTENSION |
| EA | 1 |
| 9-5/8″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 9-5/8″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 8″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| BASKET GRAPPLE 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 17.1.3 | OVERSHOT 8-1/8″ SERIES 150 FS | OVERSHOT 8-1/8″ | EA | 1 |
| 8-1/8″ X 42″ LONG EXTENSION |
| EA | 1 |
| 8-1/8″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 8-1/8″ X 11″ OVERSIZE GUIDE |
| EA | 1 |
| 8-1/8″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 6-1/2″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 1 X1 SET |
| EA | 1 |
| BASKET GRAPPLE 5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 17.1.4 | OVERSHOT 5-3/4″ SERIES 150 SFS | OVERSHOT 5-3/4″ | EA | 1 |
| SPIRAL GRAPPLE 4 3/4″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| BASKET GRAPPLE 4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 17.1.5 | OVERSHOT 3-5/8″ SERIES 150 SFS | OVERSHOT 3-5/8″ | EA | 1 |
| 3-5/8″ X 36 EXTENSION |
| EA | 1 |
| SPIRAL GRAPPLE 2-7/8″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| 17.2 | FISHING JARS |
|
|
|
| 17.2.1 | 7-3/4″ HYDRAULIC FISHING JARS
OD 197 MM, ID 71 MM, OVERALL LENGTH (PULLED) 4430 MM
STROKE 330 MM,TENSILE LOAD 1870 KN,
TENSILE DOWNHOLE MAX 2200 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 6-5/8 REG | 7-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 17.2.2 | 6-1/4″ HYDRAULIC FISHING JARS
OD 159 MM, ID 57 MM, OVERALL LENGTH (PULLED) 4410 MM
STROKE 320 MM,TENSILE LOAD 12700 KN,
TENSILE DOWNHOLE MAX 700 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 4-1/2 IF | 6-1/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 17.2.3 | 4-3/4″ HYDRAULIC FISHING JARS
OD 121 MM, ID 45 MM, OVERALL LENGTH (PULLED) 4065 MM
STROKE 305 MM,TENSILE LOAD 980 KN,
TENSILE DOWNHOLE MAX 400 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 3-1/2 IF | 4-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 17.2.4 | 3-3/4″ HYDRAULIC FISHING JARS CONNECTION 2-7/8 REG | 3-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 17.3 | BUMPER SUBS |
|
|
|
| 17.3.1 | 7-3/4″ BUMPER SUBS
OD 197 MM, ID 70 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1530 KN, WORK STROKE 1500 MM
CONNECTION 6-5/8 REG, CLOSED LENGTH 2740MM | 7-3/4″ BUMPER SUBS | EA | 1 |
| 17.3.2 | 6-1/4″BUMPER SUBS
OD 159 MM, ID 51 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1430 KN, WORK STROKE 1400 MM
CONNECTION 4-1/2 IF, CLOSED LENGTH 2600MM | 6-1/4″BUMPER SUBS | EA | 1 |
| 17.3.3 | 4-3/4″ BUMPER SUBS
OD 121 MM, ID 38 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1220 KN, WORK STROKE 1000 MM
CONNECTION 3-1/2 IF, CLOSED LENGTH 2110MM | 4-3/4″ BUMPER SUBS | EA | 1 |
| 17.3.4 | 3-3/4″ BUMPER SUBSCONNECTION 2-7/8REG | 3-3/4″ BUMPER SUB | EA | 1 |
| 17.4 | SAFETY JOINT |
|
|
|
| 17.4.1 | SAFETY JOINT WITH 6-5/8″ REG BOX X PIN |
| EA | 1 |
| 17.4.2 | SAFETY JOINT WITH 4-1/2″IF BOX X PIN |
| EA | 1 |
| 17.4.3 | SAFETY JOINT WITH 3-1/2″IF BOX X PIN |
| EA | 1 |
| 17.4.4 | SAFETY JOINT WITH 2-7/8″IF BOX X PIN |
| EA | 1 |
| 17.5 | REVERSE CIRCULATING JUNK BASKET |
|
|
|
| 17.5.1 | 15″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 7-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 16″ OD FOR OPERATION INSIDE 17-1/2″ HOSE SIZE | 15″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 17.5.2 | 11″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 6-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL. JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 11-3/4″ OD FOR OPERATION INSIDE 12-1/4″ HOSE SFZE | 11″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 17.5.3 | 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 4-1/2″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 8-1/4″ OD FOR OPERATION INSIDE 8-1/2″ HOSE SIZE | 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 17.5.4 | 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 3-1/2′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 5-5/8″ OD FOR OPERATION INSIDE 6″ HOSE SIZE | 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 17.5.5 | 4″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 2-3/8′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 4-1/8″ OD FOR OPERATION INSIDE 5″ LINER | 4″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 17.6 | JUNK SUB |
|
|
|
| 17.6.1 | JUNK SUB FOR 17-1/2″ HOLE ,CUP OD 12-7/8″ &I.D. 11-5/8″ , ID 3″ ,7-5/8″ REG. BOX DOWN X 7-5/8″ REG. PIN UP | JUNK SUB FOR 17-1/2″ HOLE | EA | 1 |
| 17.6.2 | JUNK SUB FOR 12-1/4″ HOLE ,CUP OD 9-5/8″ & I.D. 8-17/32 , ID 2 13/16″ , 6-5/8″ REG. BOX DOWN X 6-5/8″ REG. PIN UP | JUNK SUB FOR 12-1/4″ HOLE | EA | 1 |
| 17.6.3 | JUNK SUB FOR 8-1/2″ HOLE ,CUP OD 6-5/8″ &I.D.5-15/16, ID 2 1/4″ , 4-1/2″ REG. BOX DWON X 4-1/2″ REG. PIN UP | JUNK SUB FOR 8-1/2″ HOLE | EA | 1 |
| 17.6.4 | JUNK SUB FOR 6″AND 5-7/8″ HOLE, CUP OD 5″ &I.D. 4-1/16, ID 1 1/2″ , 3-1/2″ REG. BOX DOWN X 3-1/2″ REG. PIN UP | JUNK SUB FOR 6″AND 5-7/8″ HOLE | EA | 1 |
| 17.7 | FISHING MAGNET |
|
|
|
| 17.7.1 | FISHING MAGNET 10 1/2” OD ,WITH 6-5/8” REG BOX CONNECTION.FISHING NECK OD 8” | FISHING MAGNET 10 1/2” OD | EA | 1 |
| 17.7.2 | FISHING MAGNET 7” OD ,WITH 4-1/2” IF BOX CONNECTION,FISHING NECK OD 6-1/2″ | FISHING MAGNET 7” OD | EA | 1 |
| 17.7.3 | FISHING MAGNET 5” OD ,WITH 2-7/8” IF BOX CONNECTION,FISHING NECK OD 4-1/8” | FISHING MAGNET 5” OD | EA | 1 |
| 17.7.4 | FISHING MAGNET 4” OD ,WITH 2-3/8″IF BOX CONNECTION,FISHING NECK OD 3-3/8” | FISHING MAGNET 4” OD | EA | 1 |
| 17.8 | JUNK MILL |
|
|
|
| 17.8.1 | JUNK MILL OF 12″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 6-5/8″ REG. BOX UP,FISHING OD 8-1/2″ | JUNK MILL OF 12″ O.D. | EA | 1 |
| 17.8.2 | JUNK MILL OF 8-1/2″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 4-1/2″ IF. BOX UP,FISHING OD 6-1/2″ | JUNK MILL OF 8-1/2″ O.D. | EA | 1 |
| 17.8.3 | JUNK MILL OF 5 3/4″, O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 3-1/2″ IF. BOX UP ,FISHING OD 4-3/4″ | JUNK MILL OF 5 3/4″, O.D. | EA | 1 |
| 17.8.4 | JUNK MILL OF 4.1/2” O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES.WITH 2-3/8″ IF. BOX UP,FISHING OD 3-3/8″ | JUNK MILL OF 4.1/2” O.D. | EA | 1 |
|
|
|
|
|
| 18 | MISCELLANEOUS |
| SET | 1 |
| 18.1 | RIG SITE MONITORING SYSTEM |
| SET | 1 |
| 18.2 | HYDRAULIC POWER UNIT |
| SET | 1 |
| 18.3 | HYDRAULIC WIRE ROPE CUTTER |
| SET | 1 |
| 18.4 | RIG ASSEMBLY AND RIG-UP TOOL |
| SET | 1 |
| 18.4.1 | DERRICK MAN’S SAFETY BELTS |
| SET | 1 |
| 18.4.2 | TOOLS AND ACCESSORIES FOR ASSEMBLY |
| SET | 1 |
| 18.4.3 | SLING LINE FOR ASSEMBLY AND LIFTING |
| SET | 1 |
| 18.4.4 | HYDRALIC JACK 50MT |
| SET | 2 |
| 18.4.5 | MECHANICAL JACK 16MT |
| SET | 2 |
| 18.4.6 | MOVABLE GREASE DEVICE |
| SET | 1 |
| 18.4.7 | TELESCOPING STAIRWAY 12M |
| SET | 1 |
Telephone
E-MAIL