| ITEM | DESCRIPTION | MODEL | UNIT | QTY |
| 1 | MAIN UNIT |
|
|
|
| 1.1 | CARRIER | CJ-02 | SET | 1 |
| 1.2 | ENGINE | CAT C15 | SET | 2 |
| 1.3 | HYDRAULIC TRANSMISSION | ALLSION S5610HR | SET | 2 |
| 1.4 | COMPOUND TRANSFER CASE | BFX160 | SET | 1 |
| 1.5 | ANGLE GEAR BOX | JCX150 | SET | 1 |
| 1.6 | DRAWWORK | JC28/11 | SET | 1 |
| 1.7 | AUXILIARY BRAKE | WCB 324 | SET | 1 |
| 1.8 | BRAKE COOLING CIRCULATION SYSTEM |
| SET | 1 |
| 1.9 | ROTARY TABLE GEAR BOX |
|
| 1 |
| 1.10 | SLOPE CHAIN BOX |
| SET | 1 |
| 1.11 | MAST, API SPEC.: API-4F | JJ18038 | SET | 1 |
| 1.12 | RAISING CYLINDERS FOR MAST |
| SET | 1 |
| 1.13 | CROWN BLOCK | TC-180 | SET | 1 |
| 1.14 | HOOK BLOCK | YG-180 | SET | 1 |
| 1.15 | SWIVEL | SL-225 | SET | 1 |
| 1.16 | ROTARY TABLE, API SPEC.: API-7K | ZP275 | SET | 1 |
| 1.17 | DRILLING LINE, 1-1/4″X1509 FT (32MM X 460M) |
| ROLL | 1 |
| 1.18 | SUBSTRUCTURE, API SPEC.: API-4F | ZZT180 | SET | 1 |
| 1.19 | RACKING PLATFORM ESCAPER | TS-00 | SET | 1 |
| 1.20 | V DOOR AND CATWALK WAY |
| SET | 1 |
| 1.21 | HYDRAULIC WINCH, 5MT, 3MT |
| EACH | 1 |
| 1.22 | HYDRAULIC CATHEAD |
| SET | 1 |
| 1.23 | DEADLINE ANCHOR |
| SET | 1 |
| 1.24 | ELEVATOR LINK | DH-250 | PAIR | 1 |
| 1.25 | HOSE |
| SET | 1 |
| 1.26 | PNEUMATIC SYSTEM |
| SET | 1 |
| 1.27 | HYDRAULIC SYSTEM |
| SET | 1 |
| 1.28 | ELECTRICAL SYSTEM |
| SET | 1 |
| 1.29 | RIG BASE |
| SET | 1 |
|
|
|
|
|
| 2 | MUD PUMP AND HP MANIFOLD |
|
|
|
| 2.1 | MUD PUMP, API SPEC. 7K | F-1000 | SET | 2 |
| 2.2 | DIESEL ENGINE | KTA38-C1200 | SET | 2 |
| 2.3 | AIR DISK CLUTCH |
| SET | 2 |
| 2.4 | BELT TRANSMISSION |
| SET | 2 |
| 2.5 | CHARGING PUMP, PULSATION DAMPENER, RELIEF VALVE, PRESSURE GAUGE, SKID AND ETC. |
| SET | 2 |
| 2.6 | HIGH PRESSURE MANIFOLD AND PIPE LINE FROM MUD PUMP TO STAND PIPE |
| SET | 1 |
|
|
|
|
|
| 3 | SOLID CONTROL SYSTEM, TOTAL CAPACITY: 1000BBL |
|
|
|
| 3.1 | MUD TANKS |
|
|
|
| 3.1.1 | SHALE SHAKER TANK | 300BBL | SET | 1 |
| 3.1.2 | INTERMEDIATE TANK | 400BBL | SET | 1 |
| 3.1.3 | SUCTION TANK | 300BBL | SET | 1 |
| 3.1.4 | TRIP TANK (INTEGRATED INTO SHAKER TANK) | 50BBL | SET | 1 |
| 3.1.5 | PILL TANK (INTEGRATED INTO SUCTION TANK) | 50BBL | SET | 1 |
| 3.2 | SOLID CONTROL EQUIPMENTS |
|
|
|
| 3.2.1 | SHALE SHAKER |
| SET | 2 |
| 3.2.2 | DESANDER |
| SET | 1 |
| 3.2.3 | DESILTER |
| SET | 1 |
| 3.2.4 | VACCUM DEGASSER |
| SET | 1 |
| 3.2.5 | DESANDER,DESILTER PUMP |
| SET | 2 |
| 3.2.6 | MIXING HOPPER PUMP |
| SET | 2 |
| 3.2.7 | AGITATOR |
| SET | 6 |
| 3.2.8 | MUD GUN |
| SET | 5 |
| 3.2.9 | POOR-BOY DEGASSER |
| SET | 1 |
| 3.3 | FLOW LINE, WALKWAY, LADDERS, HANDRAIL AND CONEECTION PIPES. (ALL CONNECTION BETWEEN TWO TANKS UNION CONECTIONS) |
| SET | 1 |
|
|
|
|
|
| 4 | POWER SUPPLY AND CONTROL SYSTEM |
|
|
|
| 4.1 | DIESEL GENERATORS, 400EKW,1500RPM, 500KVA | CAT C15 | SET | 2 |
| 4.2 | GENERATOR HOUSE |
| SET | 2 |
| 4.3 | POWER CONTROL SYSTEM(MCC), C/W MCC HOUSE |
| SET | 1 |
| 4.4 | RIG SITE LIGHTING SYSTEM AND ELECTRICAL SUPPLY SYSTEM |
| SET | 1 |
|
|
|
|
|
| 5 | AIR SUPPLY SYSTEM |
|
|
|
| 5.1 | SULLAIR AIR COMPRESSOR | LS12-50HHAC | SET | 2 |
| 5.2 | SULLAIR DRYER, COOLING TYPE | SRC-240 | SET | 1 |
| 5.3 | AIR RESERVOIR:2.5M3 | C-2.5/1.0 | PCS | 1 |
| 5.4 | AIR SUPPLY HOUSE |
| SET | 1 |
| 5.5 | ACCESSORIES |
| SET | 1 |
|
|
|
|
|
| 6 | FUEL AND WATER TANK |
|
|
|
| 6.1 | WATER TANK | 500BBL | SET | 2 |
| 6.2 | FUEL TANK | 500BBL | SET | 1 |
|
|
|
|
|
| 7 | BOP SYSTEM |
|
|
|
| 7.1 | 13.5/8” 5,000PSI WP HYDRAULIC OPERATED ANNULAR BOP, SHAFFER TYPE, BLOT HEAD, ACCORDING TO API 16A. LATEST EDITION. 13.5/8” VERTICAL BORE. 13.5/8” 5,000PSI STUDDED TOP X 13.5/8” 5,000PSI FLANGED BOTTOM. TEMPERATURE CLASS: T-20 | 13.5/8” 5,000PSI WP ANNULAR BOP | SET | 1 |
| 7.2 | 13.5/8″ 5,000PSI DOUBLE RAM BOP, CAMERON U TYPE WITH STANDARD BONNET BOLTS MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A.
– TOP CONNECTION: FLANGED 13.5/8″ 5,000PSI WP BX-160
– BOTTOM CONNECTION: FLANGED 13.5/8″ 5,000PSI WP BX-160
– STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS AND ALL SIDE OUTLETS.
– SIDE OUTLETS: QTY 4 STUDDED 4.1/16″ 5,000PSI WP
– TEMPERATURE CLASS:T-20
– RAM SUB ASSEMBLY, 5” PIPE RAM AND BLIND RAM | 13.5/8″ 5,000PSI DOUBLE RAM BOP | SET | 1 |
| 7.3 | RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 2.7/8” |
| SET | 1 |
| 7.4 | RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 3.1/2” |
| SET | 1 |
| 7.5 | RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 4.1/2” |
| SET | 1 |
| 7.6 | RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 7” |
| SET | 1 |
| 7.7 | RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 9.5/8” |
| SET | 1 |
| 7.8 | VARIABLE RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, 5” ~ 2.7/8” |
| SET | 1 |
| 7.9 | BLIND RAM ASSEMBLY FOR 13-5/8” 5,000PSI RAM BOP, |
| SET | 1 |
| 7.10 | DRILLING SPOOL, 13-5/8” 5,000PSI FLANGE TOP & BOTTOM WITH 2 EA 3.1/8” 5,000PSI FLANGE OUTLETS | DRILLING SPOOL 13-5/8” 5000PSI | SET | 1 |
| 7.11 | CHOKE LINE, CONSIST OF:
1EA GATE VALVE, 3.1/8” 5,000PSI FLANGE END, MANUAL OPERATED
1EA GATE VALVE, 3.1/8” 5,000PSI FLANGE END, HYDRAULIC OPERATED
1LOT NECESSARY BOLTS, NUTS AND GASKETS FOR CHOKE LINES | CHOKE LINE | SET | 1 |
| 7.12 | FLEXIBLE HOSE 3-1/8″ 5000PSI LENGTH 30FT, WITH FLANGED CONNECTER | FLEXIBLE HOSE | JT | 1 |
| 7.13 | CHOKE MANIFOLD, 3.1/8” 5,000PSI C/W:
13 EA 3 1/8″ GATE VALVE 5K;
1 EA 2 1/16″ GATE VALVE 5K;
1 EA 3 1/8″ HYDRAULIC CHOKE VALVE 5K;
1 EA 3 1/8″ MANUAL CHOKE VALVE 5K;
1 EA 2 1/16″ FLANGED PRESSURE TRANSIMITTER 5K;
1 EA 4 X 3 1/8″ X 5K & 1 X 2 1/16″ X 5K STUDDED BLOCK;
3 EA 4 X 3 1/8″ X 5K STUDDED BLOCK;
2 EA 3 1/8″ X 5K FLANGED SPOOL, L=43.2″;
1 EA 3 1/8″ X 5K FLANGED SPOOL, L=5.9″;
5 EA 3 1/8″ BLIND FLANGE 5K
1 EA SKID BASE | CHOKE MANIFOLD, 3.1/8” 5,000PSI | SET | 1 |
| 7.14 | KILL LINE, CONSIST OF:
2EA GATE VALVE, 3.1/8” 5,000PSI FLANGE END, MANUAL OPERATED
1LOT NECESSARY BOLTS, NUTS AND GASKETS FOR CHOKE LINES |
| SET | 1 |
| 7.15 | FLEXIBLE HOSE 3-1/8″ 5000PSI LENGTH 30FT, WITH FLANGED CONNECTER |
| JT | 1 |
| 7.16 | KILL MANIFOLD, 3.1/8” 5,000PSI C/W:
2 EA GATE VALVE 3 1/8″ 5000PSI W.P. FLANGED ENDS;
1 EA CHECK VALVE 3 1/8″ 5000PSI W.P. FLANGED ENDS;
1 EA GATE VALVE 2 1/16″ 5000PSI W.P. FLANGED ENDS;
1 EA FIVE TEE 3 1/8″ 5000PSI OUTLETS;
1 EA BLIND FLANGE 3 1/8″ 5000PSI;
2 EA WELDD NECK FLANGE 3 1/8″ 5000PSI;
1 EA INSTRUMENT FLANGE 2 1/16″ 5000PSI WITH 1/2″ NPT;
1 EA NEEDLE VALVE 1/2″ NPT MALE X FEMALE 5000PSI W.P.
1 EA PRESSURE GAUGE 0-5000PSI W.P. WITH 1/2″NPT MALE. | KILL MANIFOLD, 3.1/8” 5,000PSI | SET | 1 |
| 7.17 | CONTROL PANEL FOR CHOKE MANIFOLD |
| SET | 1 |
| 7.18 | BOP HYDRAULIC CLOSING UNIT, MODEL FKQ480-5
BOP CONTROL UNIT WITH AIR ACTUATED ACCUMULATOR SYSTEM, 3000 PSI WP, CONSISTING OF :
– SIXTEEN (12) ACCUMULATOR BOTTLES (LOW-TEMPERATURE), WITH VOLUME 40L EACH, WITH 2″ PORTS, COMPLETE WITH ISOLATION VALVES ON EACH BOTTLE ;
– CONTROL OBJECT: 5
– ONE (1) 3/4″ X 3300 PSI RELIEF VALVE ;
– ONE (1) 1″ BYPASS VALVE (TO GO FROM MANIFOLD PRESSURE TO ACCUMULATOR PRESSURE QUICK);
– ONE (1) TRIPLEX PLUNGER PUMP, COMPLETE WITH EXPLOSION-PROOF E/MOTOR;
– ONE (1) REMOTE CONTROL PANEL ;
– TWO (2) EXTERNAL ACCUMULATOR MANIFOLDS;
– HYDRAULIC CLOSING UNIT MOUNTED ON HEAVY-DUTY SKIDS. | BOP HYDRAULIC CLOSING UNIT | SET | 1 |
| 7.19 | 1” 5000PSI FIREPROOFING HOSE 10M LENGTH |
| JT | 30 |
| 7.20 | AIR OPERATED TEST PUMP, 20,000PSI C/W CHART RECORDER, GAUGES, HIGH PRESSURE AND LOW PRESSURE HOSES. | AIR OPERATED TEST PUMP | SET | 1 |
| 7.21 | 1 EA 13-5/8” 5K TEST STUMP |
| SET | 1 |
|
|
|
|
|
| 8 | DRILLING INSTRUMENTATION |
|
|
|
| 8.1 | INCLUDING SENSORS, DISPLAY SYSTEM, DATA ACQUISITION SYSTEM, RECORDING SYSTEM, MOUNTING ACCESSORIES, HYDRAULIC HOSE, CABLES AND FITTINGS, KITS |
| SET | 1 |
|
|
|
|
|
| 9 | SAFETY EQUIPMENTS |
|
|
|
| 9.1 | H2S DETECTOR SYSTEM |
|
|
|
| 9.1.1 | MSA TWO CHANNEL CONTROLLER UNITE MODEL 9020 WITH LCD 4~20MA & RELAY OUTLET，ONE 9020 CAN BE CONNECTED WITH TWO DETECTORS | MSA 9020 | EA | 4 |
| 9.1.2 | MSA MODEL 9020-10 WALL CONTROL CABINET,ONE CABINET CAN SET 5 9020 CONTROL UNITES | MSA 9020-10 | EA | 1 |
| 9.1.3 | MSA MODEL ULTIMA-XE-H2S TOXIC GAS DETECTOR(EXP) WITH LCD DISPLAY ,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT | MSA ULTIMA-XE-H2S | EA | 4 |
| 9.1.4 | MSA MODEL ULTIMA-XE-LEL COMBUSTIBLE GAS DETECTOR(EXP) WITH LCD DISPLAY,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT,ULTIMA-XE-H2S | MSA ULLTIMA-XE-LEL | EA | 4 |
| 9.1.5 | DIGITIAL POWER FOR ALARMER,5A@24VDC,AND BE SET IN CONTROL CABINET | DIGITIAL POPWER 24 VDC | EA | 1 |
| 9.1.6 | 3 LINE SHIELD CABLE RPPV3X1.5 | CABLE3X1.5 | M | 1200 |
| 9.1.7 | CALIBRATION KITS FOR 10PPM H2S ,INLUDING CALIBRATION GAS BOTTLE AND FLOW VALVE | CALIBRATION KIT | SET | 1 |
| 9.1.8 | ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) | ALARMER(RED LAMP) | SET | 1 |
| 9.1.9 | ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) | ALARMER(YELLOW LAMP) | SET | 1 |
| 9.1.10 | MSA MADULE PORTABLE INSTRUMENT MODEL ORION PLUS EX-O2-SO2-H2S-CO2,WITH GAS PUMP | MSA PORTABLE INSTRUMENT | SET | 2 |
| 9.1.11 | MSA PORTABLE INSTRUMENT MODEL ALTAIR-PRO FOR H2S | MSA ALTAIR-PRO | SET | 4 |
| 9.1.12 | MSA PORTABLE INSTRUMENT MODEL ALTAIR PRO FOR SO2 | MSA ALTAIR-PRO | SET | 2 |
| 9.1.13 | CALIBRATION GAS | CALIBRATON GAS | SET | 2 |
| 9.1.14 | FLOW VALVE | 0.25L/MIN | SET | 2 |
| 9.1.15 | ONE AIR PURITY TESTING KIT. | MSA9920243 | SET | 1 |
| 9.1.16 | CHARGE PUMP
100L/MIN
MOTOR: 2..2KW, 400V 3 PHASES
GRP COOLING | MSA100EFI | SET | 1 |
| 9.1.17 | SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE, MINIMUM 30 MINUTES, CYLINDER PRESSURE 200 BAR, WITH CASE. | MSA | SET | 8 |
| 9.1.18 | EMERGENCY ESCAPE SETS, SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE 5 MINUTES, CYLINDER PRESSURE 200 BAR, HANSEN FITTING FOR CONNECTION TO AIR LINE SYSTEM. | MSA9920005-1 | SET | 6 |
| 9.1.19 | PORTABLE GASOLINE DRIVEN RECHARGE COMPRESSOR, COMPLETE AND CERTIFIED. 100PFI | MSA-9960029 | SET | 1 |
| 9.1.20 | MOBILE BOTTLE |
| EA | 4 |
| 9.2 | FIRE SAFETY EQUIPMENTS |
|
|
|
| 9.2.1 | FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 50KG WHEELED | ABS DRY CHEMICAL, 50KG WHEELED | SET | 4 |
| 9.2.2 | FIRE EXTINGUISHER FOR MAIN CAMP
CO2, 5KG | CO2, 5KG | SET | 12 |
| 9.2.3 | FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 8KG | ABS DRY CHEMICAL, 8KG | SET | 60 |
| 9.2.4 | FIRE PUMP SYSTEM |
| SET | 2 |
| 9.2.5 | FIRE HOSE 300M |
| SET | 1 |
| 9.2.6 | FIRE FIGHTING OUTFITS |
| SET | 4 |
| 9.3 | SAFETY BELT |
| SET | 6 |
| 9.4 | OTHER SAFETY EQUIPMENTS |
| SET | 1 |
| 9.4.1 | EYEWASH STATION |
| EA | 4 |
| 9.4.2 | SHOWER STATION |
| SET | 2 |
| 9.4.3 | HEARING PROTECTION |
| PAIR | 200 |
| 9.4.4 | HARD HAT |
| EA | 80 |
| 9.4.5 | SAFETY BOOTS |
| PAIR | 80 |
| 9.4.6 | GLOVE |
| SET | 100 |
| 9.4.7 | FIRST AID BOX |
| SET | 2 |
|
|
|
|
|
| 10 | CAMPS |
|
|
|
| 10.1 | OFFICE |
| SET | 2 |
| 10.2 | 2 MEN ROOM |
| SET | 2 |
| 10.3 | 4 MEN BEDROOM |
| SET | 2 |
| 10.4 | 8 MEN BEDROOM |
| SET | 5 |
| 10.5 | CLINIC |
| SET | 1 |
| 10.6 | KITCHEN FOR JUNIOR STAFF |
| SET | 1 |
| 10.7 | RECREATION ROOM FOR JUNIOR STAFF |
| SET | 1 |
| 10.8 | KITCHEN FOR SENIOR STAFF |
| SET | 1 |
| 10.9 | RECREATION ROOM FOR SENIOR STAFF |
| SET | 1 |
| 10.10 | LAUNDRY |
| SET | 1 |
| 10.11 | DRY STORES |
| SET | 1 |
| 10.12 | FREEZER/REEFER |
| SET | 1 |
| 10.13 | PRAYING ROOM |
| SET | 1 |
| 10.14 | ABLUTIONS (SINKS , SHOWERS ,TOILETS) |
| SET | 1 |
| 10.15 | PORTABLE WATER TANK |
| SET | 1 |
| 10.16 | FUEL TANK |
| SET | 1 |
| 10.17 | DIESEL GENERATOR. 320KW, 400V, 60HZ, 400KVA, 1500RPM | CAT C15 | SET | 2 |
| 10.18 | DIESEL GENERATOR HOUSE |
| SET | 1 |
|
|
|
|
|
| 11 | TUBULAR |
|
|
|
| 11.1 | DRILL PIPE |
|
|
|
| 11.1.1 | DRILL PIPE 5″ FRICTION WELDED
-WEIGHT: 19.5 PPF
-GRADE: G-105
-WALL THICKNESS: 0.362″
-TOOL JOINT OD: 6 5/8″
-TOOL JOINT ID: 3 1/4″
-UPSET TYPE: IEU
-PIN TONG SPACE: 7”
-BOX TONG SPACE: 10″ +3″ HARDBANDING
-TAPER SHOULDER: 18 DEGREE
-CONNECTION: NC50(4 1/2″ IF)
-LENGTH RANGE: R2
-WITH ARNCO-100XT HARDBANDING AND TK34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION | DRILL PIPE 5″ G-105 | M | 3000 |
| 11.1.2 | DRILL PIPE 3 1/2″ FRICTION WELDED
-WEIGHT: 13.3 PPF
-GRADE: G-105
-WALL THICKNESS: 0.368″
-TOOL JOINT OD: 5″
-TOOL JOINT ID: 2 7/16″
-UPSET TYPE: EU
-PIN TONG SPACE: 8″
-BOX TONG SPACE: 10 1/2″ + 3” HARDBANDING
-TAPER SHOULDER: 18°
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH RANGE: R2 (9.45M-9.75M)
-WITH ARNCO-100XT HARDBANDING AND TX34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION | DRILL PIPE 3 1/2″ G-105 | M | 2000 |
| 11.2 | HWDP |
|
|
|
| 11.2.1 | 5″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-CENTER UPSETS OD: 5 1/2″, CENTER UPSETS ENDS: 5 1/8″
-CENTER UPSET LENGTH: 24″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CONNECTION: NC50 (4 1/2″ IF)
-TOOL JOINT OD: 6 1/2″, ID: 3″
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS. | HWDP 5” | JT | 15 |
| 11.2.2 | 3 1/2″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-WEIGHT: 25.3 LBS/FT
-CENTER UPSETS OD: 4″, CENTER UPSETS ENDS: 3 5/8″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CENTER UPSET LENGTH: 24″
-TOOL JOINT OD: 4 3/4″, ID: 2 1/16″
-CONNECTION: NC38 (3 1/2″ IF)
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
-WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ -WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS | HWDP 3-1/2” | JT | 15 |
| 11.3 | DRILL COLLAR |
|
|
|
| 11.3.1 | 8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: 6 5/8″ REG
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 8″ SPIRAL DRILL COLLAR | JT | 15 |
| 11.3.2 | 6 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 30 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 50 (4 1/2″ IF)
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 6 1/2″ SPIRAL DRILL COLLAR | JT | 24 |
| 11.3.3 | 4 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 1/4″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC38
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK | 4 3/4″ SPIRAL DRILL COLLAR | JT | 18 |
| 11.4 | DRILL PIPE PUP JOINT |
|
|
|
| 11.4.1 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 5 FT |
| JT | 1 |
| 11.4.2 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 10 FT |
| JT | 1 |
| 11.4.3 | 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 15 FT |
| JT | 1 |
| 11.4.4 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 5 FT |
| JT | 1 |
| 11.4.5 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 10 FT |
| JT | 1 |
| 11.4.6 | 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 15 FT |
| JT | 1 |
| 11.5 | CROSSOVER SUB |
|
|
|
| 15.5.1 | 6 5/8 REG BOX X 7-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.2 | 4-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.3 | 3-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.4 | 3-1/2 IF BOX X 4-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.5 | 4-1/2 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.6 | 2-7/8 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.5.7 | 3-1/2 IF BOX X 2-7/8 IF PIN OVERALL LENGTH 36″ |
| EA | 2 |
| 15.6 | BIT SUB |
|
|
|
| 11.6.1 | 8 1/2″ O.D X 3″ I.D BIT SUB 6 5/8″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 5F-6R |
| EA | 2 |
| 11.6.2 | 8 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 11.6.3 | 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 11.6.4 | 6 1/2″ O.D X 1 3/4″ I.D BIT SUB 3 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 2F-3R |
| EA | 2 |
| 11.6.5 | 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 3 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R |
| EA | 2 |
| 11.7 | KELLY |
|
|
|
| 11.7.1 | 5 1/4“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 6 3/8″
-CONNECTION: NC50( 4 1/2″ IF)
-BORE SIZE 3 1/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J | 5 1/4“ HEX KELLY | EA | 1 |
| 11.7.2 | 3-1/2“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 4-1/8″
-CONNECTION: NC31( 2 7/8″ IF)
-BORE SIZE 1 3/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J | 3-1/2“ HEX KELLY | EA | 1 |
| 11.8 | KELLY COCK, KELLY SAVER SUB & SAFETY VALVES |
|
|
|
| 11.8.1 | UPPER KELLY COCK,10000PSI W.P. WITH 6-5/8 REG LH CONN. | UPPER KELLY COCK | EA | 2 |
| 11.8.2 | LOWER KELLY COCK,10000PSI W.P. WITH 4-1/2IF CONN. | LOWER KELLY COCK | EA | 2 |
| 11.8.3 | LOWER KELLY COCK,10000PSI W.P. WITH 2-7/8IF CONN. |
| EA | 2 |
| 11.8.4 | KELLY SAVER SUB OD 6-3/8″ CONNECTION 4-1/2 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR | KELLY SAVER SUB | EA | 2 |
| 11.8.5 | KELLY SAVER SUB OD 4-1/8″ CONNECTION 2-7/8 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR |
| EA | 2 |
| 11.8.6 | FULL OPENING SAFETY VALVE 10,000PSI WP
–FOR 5″ DRILL PIPE WITH 4-1/2IF CONN. | SAFETY VALVE | EA | 1 |
| 11.8.7 | FULL OPENING SAFETY VALVE
10,000PSI WP
-FOR 3-1/2″ DRILL PIPE WITH 3-1/2 IF CONN. |
| EA | 1 |
|
|
|
|
|
| 12 | DRILLING TOOLS |
|
|
|
| 12.1 | ELEVATORS |
|
|
|
| 12.1.1 | CASING SLIP TYPE ELEVATOR/SPIDER, 350 TON 4-1/2″ TO 13 /3/8″ AIR OPERATED OPERATED, VARCO STYLE
2 EA BODY ASSEMBLY COMPLETE, WITH AIR SUPLLY HOSE ASSEMBLIES AIR OPERATED ,
1 EA CASING GUIDE BELL ASSEMBLY
1 EA SPIDER ADAPTER PLATE 27-1/2″
1 SET 5″INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 5 1/2″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 5 1/2″
2 SET SLIP ASSEMBLY5 1/2″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 7″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 7″
2 SET SLIP ASSEMBLY 7″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY.FOR 9-5/8″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 9-5/8″
2 SET SLIP ASSEMBLY 9-5/8″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 13-3/8″
1 EA ELEVATOR GUIDE PLATE ASSY.FOR 13-3/8″
2 SET SLIP ASSEMBLY 13-3/8″ WITH INSERTS |
| SET | 2 |
| 12.1.2 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 20″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.3 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 13-3/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.4 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-5/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.5 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 7″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.6 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5 1/2″” CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.7 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5″ CASING(LINER), MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.8 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-1/2″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.9 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 8-1/4″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.10 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 6-1/2″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.11 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 4-3/4″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.12 | ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 3-1/2″ DRILL COLLAR, MODEL TA100, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.13 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.14 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL GG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 350TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.15 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 3-1/2″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.16 | ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 2-3/8″ DRILL PIPE, MODEL MG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. |
| SET | 2 |
| 12.1.17 | ELEVATORS (COMPLETE) FOR 20″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 12.1.18 | ELEVATORS (COMPLETE) FOR 13-3/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 12.1.19 | ELEVATORS (COMPLETE) FOR 9-5/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 12.1.20 | ELEVATORS (COMPLETE) FOR 7″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 12.1.21 | ELEVATORS (COMPLETE) FOR 5-1/2″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 7A STANDARD |
| SET | 1 |
| 12.1.22 | ELEVATORS (COMPLETE) FOR 5″CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 8A STANDARD |
| SET | 1 |
| 12.2 | POWER TONG |
|
|
|
| 12.2.1 | ZQ127/25Y POWER TONG
PIPE SIZE RANGE OF MASTER TONG 2 3/8″-5 1/2″
HIGH GEAR RATED TORQUE 5100 N.m
LOW GEAR RATED TORQUE 25000 N.m
HIGH GEAR RATED SPEED ≤65 R/MIN
LOW GEAR RATED SPEED ≤10 R/MIN
RATED OPERATION PRESSURE 16MPa
MAX.FLOW 32 GPM
PNEUMATIC OPERATION PRESSURE 0.5-0.9 MPa SIZE 1250*780*1000
WEIGHT (INCLUDING BACKUP TONG) 730KG |
| SET | 1 |
| 12.2.2 | TQ340-35Y POWER CASING TONG
SIZE RANGE:4 1/2″-13 3/8″
MAX PRESSURE: 3045 PSI
WORKING FLOW: 29.3- 45.4 GPM
HIGH GEAR TORQUE: 2950-4130 FT.LBF
LOW GEAR TORQUE: 19175-25960 FT.LBF
HIGH GEAR SPEED: 57-95 RPM
LOW GEAR SPEED: 9-15. RPM
SIZE: 62.2″ X 35.4″ X 33.9″
WEIGHT: 1670 LB |
| SET | 1 |
| 12.2.3 | TQ508-70Y POWER CASING TONG
SIZE RANGE: 9 5/8″-20″(245-508mm)
MAX PRESSURE: 3045 PSI
WORKING FLOW: 35 GPM
HIGH GEAR TORQUE: 7000FT.LBS
LOW GEAR TORQUE: 50000 FT.LBS
HIGH GEAR SPEED: 23 RPM
LOW GEAR SPEED: 3. RPM
SIZE: 81″ X 48″ X 27″(2050X1220X690MM)
WEIGHT: 3200LB(1450KG) |
| SET | 1 |
| 12.3 | BIT BREAKER |
|
|
|
| 12.3.1 | BIT BREAKER FOR 26” |
| EA | 1 |
| 12.3.2 | BIT BREAKER FOR 17 1/2” |
| EA | 1 |
| 12.3.3 | BIT BREAKER FOR 12-1/4” |
| EA | 1 |
| 12.3.4 | BIT BREAKER FOR 8-1/2” |
| EA | 1 |
| 12.3.5 | BIT BREAKER FOR 6” |
| EA | 1 |
| 12.4 | SLIPS |
|
|
|
| 12.4.1 | SLIPS (COMPLETE) FOR 20″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5329 ,MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.2 | SLIPS (COMPLETE) FOR 13.3/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5313, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.3 | SLIPS (COMPLETE) FOR 9.5/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5307, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.4 | SLIPS (COMPLETE) FOR 7″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5301, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.5 | SLIPS (COMPLETE) FOR 5.1/2″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.6 | SLIPS (COMPLETE) FOR 9-1/2″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 8-1/2″ TO 10″), BUTTON TYPE DIES, PART NUMBER 2530, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.7 | SLIPS (COMPLETE) FOR 8.1/4″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 6.3/4″ TO8.1/4″), BUTTON TYPE DIES, PART NUMBER 2503, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.8 | SLIPS (COMPLETE) FOR 6-1/2″ DRILL COLLAR, MODEL DCS-R (SIZE RANGE 5-1/2″ TO 7″), BUTTON TYPE DIES, PART NUMBER 2550, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.9 | SLIPS (COMPLETE) FOR 4 3/4″DRILL COLLAR, MODEL DCS-R (SIZE RANGE 4-1/2″ TO 6″), BUTTON TYPE DIES, PART NUMBER 2552 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.10 | SLIPS (COMPLETE) FOR 3 1/5″DRILL COLLAR, MODEL DCS-S (SIZE RANGE 3″ TO 4″), BUTTON TYPE DIES, PART NUMBER 2572, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 1 |
| 12.4.11 | SLIPS (COMPLETE) FOR 5″ DRILL PIPE, SLIP BODY SIZE 5-1/2″, MODEL SDXL, PART NUMBER 15520, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 12.4.12 | SLIPS (COMPLETE) FOR 3.1/2″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15522, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 12.4.13 | SLIPS (COMPLETE) FOR 2.7/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15523 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 12.4.14 | SLIPS (COMPLETE) FOR 2.3/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15524 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. |
| EA | 2 |
| 12.5 | SAFETY CLAMP |
|
|
|
| 12.5.1 | SAFETY CLAMP FOR 9-1/2″ TO 10-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 12.5.2 | SAFETY CLAMP FOR 8-1/2″ TO 9-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 12.5.3 | SAFETY CLAMP FOR 6-1/2″ TO 7-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 12.5.4 | SAFETY CLAMP FOR 4-1/2″ TO 5-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 12.5.5 | SAFETY CLAMP FOR 3-1/2″ TO 4-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD |
| SET | 1 |
| 12.6 | MANUAL TONG |
|
|
|
| 12.6.1 | 1 SET (2 EACH) MANUAL TONG FOR 2-3/8″ TO 3-1/2″ DRILLING AND CASING TUBULARS, MODEL HT35-C WITH LUG JAWS FOR FULL SIZE, MAXIMUM RATED CAPACITY 35,000FTLBS |
| SET | 1 |
| 12.6.2 | 1 SET (2 EACH) MANUAL TONG FOR 3 1/2″ TO 13 3//8″ DRILLING AND CASING TUBULARS, MODEL B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 55,000FTLBS |
| SET | 1 |
| 12.6.3 | 1 SET (2 EACH) MANUAL TONG FOR 13-3/8″ TO 20″ DRILLING AND CASING TUBULARS, MODEL HT25 -B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 25,000FTLBS |
| SET | 1 |
| 12.7 | STABILIZERS |
|
|
|
| 12.7.1 | 17-1/2″ HOLE INTEGRAL BLADE NEAR BIT STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X BOX CONN. |
| EA | 2 |
| 12.7.2 | 17-1/2″ HOLE INTEGRAL BLADE STRING TYPE STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X PIN CONN. |
| EA | 4 |
| 12.7.3 | 12-1/4″ HOLE INTEGRAL BLAND NEAR BIT TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X BOX CONN |
| EA | 2 |
| 12.7.4 | 12-1/4″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X PIN CONN |
| EA | 4 |
| 12.7.5 | 8-1/2″ HOLE INTEGRAL BLAND NEAR TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOXUP X 4-1/2 REG BOX DOWN CONN |
| EA | 2 |
| 12.7.6 | 8-1/2″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOX X PIN CONN |
| EA | 4 |
| 12.7.7 | 6″ HOLE INTEGRAL BLAND NEAR BIT STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX UP X 3-1/2 REG BOX DOWN CONN. |
| EA | 2 |
| 12.7.8 | 6″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX X PIN CONN. |
| EA | 4 |
| 12.8 | CASING THREAD PROTECTORS |
|
|
|
| 12.8.1 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 20″ CASING |
| EA | 3 |
| 12.8.2 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 13-3/8″ CASING |
| EA | 3 |
| 12.8.3 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 9-5/8″ CASING |
| EA | 3 |
| 12.8.4 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 7″ CASING |
| EA | 3 |
| 12.8.5 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5-1/2″ CASING |
| EA | 3 |
| 12.8.6 | QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5″ CASING |
| EA | 3 |
|
|
|
|
|
| 13 | FISHING TOOLS |
|
|
|
| 13.1 | OVERSHOT |
|
|
|
| 13.1.1 | OVERSHOT 11-1/4″ SERIES 150 FS | OVERSHOT 11-1/4″ | EA | 1 |
| 11-1/4″ X 36 EXTENSION |
| EA | 1 |
| 11-1/4″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 11-1/4″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 9-1/2″, 9″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 2X1 SET |
| EA | 2 |
| BASKET GRAPPLE 8″, 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 13.1.2 | OVERSHOT 9-5/8″ SERIES 150 FS | OVERSHOT 9-5/8″ | EA | 1 |
| 9-5/8″ X 36 EXTENSION |
| EA | 1 |
| 9-5/8″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 9-5/8″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 8″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| BASKET GRAPPLE 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 13.1.3 | OVERSHOT 8-1/8″ SERIES 150 FS | OVERSHOT 8-1/8″ | EA | 1 |
| 8-1/8″ X 42″ LONG EXTENSION |
| EA | 1 |
| 8-1/8″ X 15″ OVERSIZE GUIDE |
| EA | 1 |
| 8-1/8″ X 11″ OVERSIZE GUIDE |
| EA | 1 |
| 8-1/8″ X 42″ STANDARD WALL HOOK |
| EA | 1 |
| SPIRAL GRAPPLE 6-1/2″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 1 X1 SET |
| EA | 1 |
| BASKET GRAPPLE 5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 13.1.4 | OVERSHOT 5-3/4″ SERIES 150 SFS | OVERSHOT 5-3/4″ | EA | 1 |
| SPIRAL GRAPPLE 4 3/4″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| BASKET GRAPPLE 4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER |
| SET | 1 |
| 13.1.5 | OVERSHOT 3-5/8″ SERIES 150 SFS | OVERSHOT 3-5/8″ | EA | 1 |
| 3-5/8″ X 36 EXTENSION |
| EA | 1 |
| SPIRAL GRAPPLE 2-7/8″ C/W SPIRAL GRAPPLE CONTROL PACKER |
| EA | 1 |
| 13.2 | FISHING JARS |
|
|
|
| 13.2.1 | 7-3/4″ HYDRAULIC FISHING JARS
OD 197 MM, ID 71 MM, OVERALL LENGTH (PULLED) 4430 MM
STROKE 330 MM,TENSILE LOAD 1870 KN,
TENSILE DOWNHOLE MAX 2200 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 6-5/8 REG | 7-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 13.2.2 | 6-1/4″ HYDRAULIC FISHING JARS
OD 159 MM, ID 57 MM, OVERALL LENGTH (PULLED) 4410 MM
STROKE 320 MM,TENSILE LOAD 12700 KN,
TENSILE DOWNHOLE MAX 700 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 4-1/2 IF | 6-1/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 13.2.3 | 4-3/4″ HYDRAULIC FISHING JARS
OD 121 MM, ID 45 MM, OVERALL LENGTH (PULLED) 4065 MM
STROKE 305 MM,TENSILE LOAD 980 KN,
TENSILE DOWNHOLE MAX 400 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 3-1/2 IF | 4-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 13.2.4 | 3-3/4″ HYDRAULIC FISHING JARS CONNECTION 2-7/8 REG | 3-3/4″ HYDRAULIC FISHING JARS | EA | 1 |
| 13.3 | BUMPER SUBS |
|
|
|
| 13.3.1 | 7-3/4″ BUMPER SUBS
OD 197 MM, ID 70 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1530 KN, WORK STROKE 1500 MM
CONNECTION 6-5/8 REG, CLOSED LENGTH 2740MM | 7-3/4″ BUMPER SUBS | EA | 1 |
| 13.3.2 | 6-1/4″BUMPER SUBS
OD 159 MM, ID 51 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1430 KN, WORK STROKE 1400 MM
CONNECTION 4-1/2 IF, CLOSED LENGTH 2600MM | 6-1/4″BUMPER SUBS | EA | 1 |
| 13.3.3 | 4-3/4″ BUMPER SUBS
OD 121 MM, ID 38 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1220 KN, WORK STROKE 1000 MM
CONNECTION 3-1/2 IF, CLOSED LENGTH 2110MM | 4-3/4″ BUMPER SUBS | EA | 1 |
| 13.3.4 | 3-3/4″ BUMPER SUBSCONNECTION 2-7/8REG | 3-3/4″ BUMPER SUB | EA | 1 |
| 13.4 | SAFETY JOINT |
|
|
|
| 13.4.1 | SAFETY JOINT WITH 6-5/8″ REG BOX X PIN |
| EA | 1 |
| 13.4.2 | SAFETY JOINT WITH 4-1/2″IF BOX X PIN |
| EA | 1 |
| 13.4.3 | SAFETY JOINT WITH 3-1/2″IF BOX X PIN |
| EA | 1 |
| 13.4.4 | SAFETY JOINT WITH 2-7/8″IF BOX X PIN |
| EA | 1 |
| 13.5 | REVERSE CIRCULATING JUNK BASKET |
|
|
|
| 13.5.1 | 15″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 7-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 16″ OD FOR OPERATION INSIDE 17-1/2″ HOSE SIZE | 15″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 13.5.2 | 11″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 6-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL. JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 11-3/4″ OD FOR OPERATION INSIDE 12-1/4″ HOSE SFZE | 11″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 13.5.3 | 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 4-1/2″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 8-1/4″ OD FOR OPERATION INSIDE 8-1/2″ HOSE SIZE | 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 13.5.4 | 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 3-1/2′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 5-5/8″ OD FOR OPERATION INSIDE 6″ HOSE SIZE | 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 13.5.5 | 4″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 2-3/8′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 4-1/8″ OD FOR OPERATION INSIDE 5″ LINER | 4″ OD REVERSE CIRCULATING JUNK BASKET | EA | 1 |
| 13.6 | JUNK SUB |
|
|
|
| 13.6.1 | JUNK SUB FOR 17-1/2″ HOLE ,CUP OD 12-7/8″ &I.D. 11-5/8″ , ID 3″ ,7-5/8″ REG. BOX DOWN X 7-5/8″ REG. PIN UP | JUNK SUB FOR 17-1/2″ HOLE | EA | 1 |
| 13.6.2 | JUNK SUB FOR 12-1/4″ HOLE ,CUP OD 9-5/8″ & I.D. 8-17/32 , ID 2 13/16″ , 6-5/8″ REG. BOX DOWN X 6-5/8″ REG. PIN UP | JUNK SUB FOR 12-1/4″ HOLE | EA | 1 |
| 13.6.3 | JUNK SUB FOR 8-1/2″ HOLE ,CUP OD 6-5/8″ &I.D.5-15/16, ID 2 1/4″ , 4-1/2″ REG. BOX DWON X 4-1/2″ REG. PIN UP | JUNK SUB FOR 8-1/2″ HOLE | EA | 1 |
| 13.6.4 | JUNK SUB FOR 6″AND 5-7/8″ HOLE, CUP OD 5″ &I.D. 4-1/16, ID 1 1/2″ , 3-1/2″ REG. BOX DOWN X 3-1/2″ REG. PIN UP | JUNK SUB FOR 6″AND 5-7/8″ HOLE | EA | 1 |
| 13.7 | FISHING MAGNET |
|
|
|
| 13.7.1 | FISHING MAGNET 10 1/2” OD ,WITH 6-5/8” REG BOX CONNECTION.FISHING NECK OD 8” | FISHING MAGNET 10 1/2” OD | EA | 1 |
| 13.7.2 | FISHING MAGNET 7” OD ,WITH 4-1/2” IF BOX CONNECTION,FISHING NECK OD 6-1/2″ | FISHING MAGNET 7” OD | EA | 1 |
| 13.7.3 | FISHING MAGNET 5” OD ,WITH 2-7/8” IF BOX CONNECTION,FISHING NECK OD 4-1/8” | FISHING MAGNET 5” OD | EA | 1 |
| 13.7.4 | FISHING MAGNET 4” OD ,WITH 2-3/8″IF BOX CONNECTION,FISHING NECK OD 3-3/8” | FISHING MAGNET 4” OD | EA | 1 |
| 13.8 | JUNK MILL |
|
|
|
| 13.8.1 | JUNK MILL OF 12″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 6-5/8″ REG. BOX UP,FISHING OD 8-1/2″ | JUNK MILL OF 12″ O.D. | EA | 1 |
| 13.8.2 | JUNK MILL OF 8-1/2″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 4-1/2″ IF. BOX UP,FISHING OD 6-1/2″ | JUNK MILL OF 8-1/2″ O.D. | EA | 1 |
| 13.8.3 | JUNK MILL OF 5 3/4″, O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 3-1/2″ IF. BOX UP ,FISHING OD 4-3/4″ | JUNK MILL OF 5 3/4″, O.D. | EA | 1 |
| 13.8.4 | JUNK MILL OF 4.1/2” O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES.WITH 2-3/8″ IF. BOX UP,FISHING OD 3-3/8″ | JUNK MILL OF 4.1/2” O.D. | EA | 1 |
Telephone
E-MAIL