FANN

Many of the instruments and test kits are designed to conform to the testing standards established by the American Petroleum Institute (API) and published in API SPEC 10, API RP 10B-2, API SPEC 13A, API RP 13B-1, 13B-2, 13D, 13I, 13J, and 13K, and they are suitable for field and laboratory use. Some instruments are designed to meet the requirements of the American Society for Testing and Materials (ASTM) as well as other technical specification groups.

208759 VALVE NEEDLE 1/8 X 1/8 CHROM

209466 GAUGE 1000 PSI 2in. DIAL 1/4 BOTTOM CONN

209467 GAUGE 3000 PSI 2in. DIAL 1/4 BOTTOM CONN

209470 REGULATOR 1500 PSI

209473 GLAND LONG NITROGEN SERVICE

209474 HOSE 3000 PSI 3 FT X 3/16in.

209475 BODY DUAL MANIFOLD f/MODEL 38765

HPHT Filter Press

Model 175CT

Description

HPHT Filter Press, Model 175CT simulates filtration

against a permeable formation at high temperatures

and pressures. Each 175 ml HPHT Filter Press consists

of the following components and operating supplies:

Stainless steel cell with CellTell™Positive Pressure

Indicator

Aluminum heating jacket

Pressurization System (Nitrogen or CO2)

Back Pressure Receiver, 15 ml

Graduated cylinder

Application

Measuring filtration and cake-building properties is

fundamental to treatment and control of drilling fluids.

Studying filtrate characteristics, oil, water, or emulsion

content, is also essential.

For a drilling fluid, the quantity, type and size of solid

particles, emulsified water, and properties of the liquid

phase affect the filtration characteristics. Temperature

and pressure may influence the interactions of these

various components. Therefore, filtration tests are

often performed at ambient and high temperatures,

providing data for comparison.

Advantages

Wide range of customizing configurations for your

specific needs

HPHT safety features that help protect from

hazards

Heavy-duty components and materials that

withstand HPHT conditions

Pilot light on heating jacket that signals when

temperature reaches thermostat setting

Single or double opening cells that accept various

filter media choices, such as API standard filter

paper, ceramic discs of various porosities, and

screens of various mesh sizes

Choice of 115 volt AC or 230 volt AC heating jacket

Pressurization alternatives, such as CO2

cartridges,

nitrogen, or in-house source

HPHT Filter Press 115 Volts

CO2

Pressurization Nitrogen Pressurization

HPHT Filter Press

Assembly No. 101571371 No. 101571372 No. 101565554 No. 101565556

Cell Configuration 175 ml, dual

openingb

No. 209585

175 ml, single

opening

No. 209584

175 ml, dual

openingb

No. 209585

175 ml, single

opening

No. 209584

Cap & Screen

Configuration

1 Cap No. 209536

w/Detachable

Screen, 325 Mesh/

60 Mesh Backup,

1 Cap No. 209568

Cap No. 209532

60 MeshScreena

No. 207232

1 Cap No. 209536

w/Detachable 325

Mesh Screen,

1 Cap No. 209568

Cap No. 209532

60 MeshScreena

No. 207232

Pressurization CO2

Assembly No. 209471 Dual Nitrogen Assembly No. 209545

Backpressure

Receiver 15 ml, CO2

, No. 209503 15 ml, Nitrogen, No. 209502

Heating Jacket 115 Volts, 400 Watts, No. 209492

HPHT Filter Press 230 Volts

CO2

Pressurization Nitrogen Pressurization

HPHT Filter Press

Assembly No. 101571373 No. 101571374 No. 101565558 No. 101565560

Cell

Configuration

175 ml, dual

openingb

No. 209585

175 ml, single

opening

No. 209584

175 ml, dual

openingb

No. 209585

175 ml, single

opening

No. 209584

Cap & Screen

Configuration

1 Cap No. 209536

w/Detachable

Screen, 325 Mesh/

60 Mesh Backup,

1 Cap No. 209568

Cap No. 209532

60 MeshScreena

No. 207232

1 Cap No. 209536

w/Detachable 325

Mesh Screen,

1 Cap No. 209568

Cap No. 209532

60 Mesh Screena

No. 207232

Pressurization CO2

Assembly, No. 209471 Dual Nitrogen Assembly, No. 209545

Backpressure

Receiver 15 ml, CO2

, No. 209503 15 ml, Nitrogen, No. 209502

Heating Jacket 230 Volts, 400 Watts, No. 209506

Recommended Safety Equipment

Fann Filter Press Cell Clamps are available as a separate purchase.

P/N 232207 — Filter Press Cell Clamp for 175 ml cell