|
HHF-1300 Mud pump parts list
SICHUAN HONG HUA MUD PUMP
HH MUD PUMP |
|
|
| HHF-1300/1600 TRIPLEX MUD PUMP PARTS LIST |
|
| HHF-1300/1600 TRIPLEX MUD PUMP PARTS LIST |
|
| HHF—1300/1600 General Assembly Drawing |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0100 | Frame assembly | | 2 | 11-3161-0200 | Crankshaft assembly | | 3 | 11-3161-0300 | Pinion shaft assembly | | 4 | 11-3161-0400 | Crosshead assembly | | 5 | 11-3161-0500 | Fluid end assembly | | 6 | 11-3161-0600 | Power end lubrication assembly | | 7 | 11-3161-0700 | Skid | | 8 | 11-3161-0800 | Liner spraying assembly | | 9 | 11-3161-09 | Inspection cover | | 10 | 11-3161-1000 | Breather cap | | 11 | 11-3161-11 | Nameplate | | 12 | 11-3161-1200 | Trolley | | 13 | 11-3161-1300 | Crane frame | | 14 | 11-3161-1400 | Cover plate | | 15 | 11-3161-15 | Gasket | | 16 | 11-3161-1501 | Bolt, 1/2-13UNC-2A*30 | | 17 | 11-3161-16 | Plate | | 18 | 11-3161-1700 | Oil level gauge | | 19 | 11-3161-1800 | Clean out cover | | 20 | 11-3161-19 | Gasket | | 21 | 11-3161-1502 | Bolt, 1/2-13UNC-2A*35 | | 22 | 11-3161-20 | Cover, crosshead hole | | 23 | 11-3161-21 | Gasket | | 24 | 11-3161-1503 | Bolt, 5/8-11UNC-2A*45 | | 25 | B0848-14-32 | Flat washer 14 | | 26 | B0827-003-10-73 | Rivet, 3*10 | | 27 | 11-3161-1504 | Bolt, 1-8UNC-2A*90 | | 28 | 11-3161-1505 | Nut, 1-8UNC-2B (SPL) | | 29 | B0093-27-59 | Spring washer, 27 | | 30 | B0848-16-32 | Flat washer 16 | | 31 | 11-3161-1506 | Bolt, 5/8-11UNC-2A*60 | | 32 | 11-3161-1507 | Nut , 5/8-11UNC-2B (SPL) | | 33 | B0093-16-59 | Spring washer, 16 | | 34 | 11-3161-1508 | Rubber, 40*10*5800 | | 35 | 11-3161-1509 | Screw, 8 (0.164) -32UNC-2A*16 | | 36 | 11-3161-1510 | Pressure gauge, 0~60MPa(0~8700psi) | | 37 | 11-3161-2200 | Elbow assembly | | 38 | 11-3161-1511 | Pipe plug, R1 1/2 | | 39 | 11-3161-23 | Gasket, R44 | | 40 | 11-3161-2400 | Draining filter assembly | | 41 | 11-3161-25 | Flange 5 1/8*35 | | 42 | 11-3161-2700 | Surge damper KB-75 | | 43 | 11-3161-2800 | Relieve valve JA-3 | | 44 | 11-3161-3000 | Cover plate assembly | | 45 | 11-3161-31 | Shim |
|
|
|
| HHF—1300/1600 Crankshaft Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3131-0201-00 | Cover, main bearing |
| 11-3161-0201-00 | Cover, main bearing | | 2 | 11-3131-0202 | Sleeve, main bearing (right) |
| 11-3161-0202 | Sleeve, main bearing (right) | | 3 | 11-3161-0203 | Gasket | | 4 | 11-3161-0204 | Insider retainer | | 5 | 11-3131-0205-00 | Outside retainer |
| 11-3161-0205-00 | Outside retainer | | 6 | 11-3131-0206 | Eccentric strap |
| 11-3161-0206 | Eccentric strap | | 7 | 11-3161-0207 | Positioning ring (I) | | 8 | 11-3161-0208-00 | Crankshaft | | 9 | 11-3161-0209 | Positioning ring (II) | | 10 | 11-3131-0210 | Bull gear |
| 11-3161-0210 | Bull gear | | 11 | 11-3131-0211-1 | Bolt, 1 1/2-8UN-2A*130 |
| 11-3161-0211-2 | Bolt, 1 1/2-8UN-2A*170 | | 12 | 11-3161-0212 | Spacer ring | | 13 | 11-3131-0213 | Sleeve, main bearing (left) |
| 11-3161-0213 | Sleeve, main bearing (left) | | 14 | 11-3131-0214 | Retainer ring |
| 11-3161-0214 | Retainer ring | | 15 | 11-3161-0215 | Baffle | | 16 | 11-3161-0216 | Bolt, main bearing, 3-8UN-3A | | 17 | 11-3161-0217 | Shims | | 18 | 11-3161-0218 | Screw, 5/8-11UNC-2A*120 | | 19 | 11-3161-0219-00 | Locking nut, 1 1/2-8UN-2B | | 20 | 11-3161-0220 | Bolt, 5/8-11UNC-2A*40 | | 21 | 11-3161-0227 | Bolt, 5/8-11UNC-2A*50 | | 22 | 11-3131-0221-1 | Bearing, eccentric strap, 928/660.4QU |
| 11-3161-0221-2 | Bearing, eccentric strap, 929/660.4QU | | 23 | 11-3131-0222-1 | Main bearing, 3G4053160H |
| 11-3161-0222-2 | Main bearing, 3G3003760HY | | 24 | B0848-16-32 | Flat washer, 16 | | 25 | 11-3161-0224 | Locking wire, SZ-1.50 | | 26 | 11-3161-0225 | Locking wire, SZ-3.00 | | 27 | 11-3161-0226 | Sealant | | 28 | 11-3161-0223 | Screw, 5/8-11UNC-2A*100 |
|
|
|
| HHF—1300/1600 Pinion Shaft Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0301 | Key, 2″*2″*241.3 | | 2 | 11-3131-0302/11-3161-0302 | Pinion Shaft | | 3 | 11-3161-0303 | Sleeve, Seal | | 4 | 11-3161-0304 | End Cover | | 5 | 11-3161-0305 | Gasket, End cover | | 6 | 11-3161-0306 | Gasket, Bearing housing | | 7 | 11-3161-0307 | Bearing Housing | | 8 | 11-3161-0308 | Retainer Ring | | 9 | 11-3161-0309 | Gasket, Oil trough | | 10 | 11-3161-0310-00 | Oil trough | | 11 | 11-3161-0314 | Bolt, 1/2-13UNC-2A*35 | | 12 | 11-3161-0315 | Bolt, 7/8-9 UNC-2A*52 | | 13 | 11-3161-0311 | Oil Seal, 9.125″*10.375″*0.625″ | | 14 | 11-3161-0312 | Bearing, 4G32844H | | 15 | B0093-22-59 | Spring Washer, 22 | | 16 | B0093-14-59 | Spring Washer, 14 | | 17 | 11-3161-0313 | Flange | | 18 | 11-3161-0316 | Bolt, 5/8-11UNC-2A*50 | | 19 | B0093-16-59 | Spring Washer, 16 |
|
|
|
| HHF—1300/1600 Crosshead Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0401 | Crosshead | | 2 | 11-3161-0402 | Slide, Upper | | 3 | 11-3161-0403-00 | Shim | | 4 | 11-3161-0404 | Shim | | 5 | 11-3161-0405 | Stuffing Box | | 6 | 11-3161-0406 | Oil Seal | | 7 | B34521 -190-355-69 | O Ring, 190*3.55G | | 8 | 11-3161-0407 | Oil Seal, 5″*6.25″*0.625″ | | 9 | 11-3161-0408 | Gasket | | 10 | 11-3161-0409 | End Cover | | 11 | 11-3161-0410 | Locking Spring | | 12 | 11-3161-0411 | Baffle | | 13 | 11-3161-0412 | Crosshead extension rod | | 14 | 11-3161-0413 | Crosshead Pin | | 15 | B34521-125-700-69 | O Ring, 125*7.0G | | 16 | 11-3161-0420 | Screw, 3/4-10UNC-2A*65 | | 17 | 11-3161-0414 | Gasket | | 18 | B34521-160-700-69 | O Ring,160*7.0G | | 19 | 11-3161-0415 | Slide, Lower | | 20 | 11-3161-0416 | Crosshead Pin Cap | | 21 | 11-3161-0417 | Crosshead Bearing, 254941QU | | 22 | 11-3161-0418 | Pipe Joint, NPT3/8*50.8 | | 23 | 11-3161-0421 | Bolt, 1-8UNC-2A*60 | | 24 | 11-3161-0422 | Bolt, 1-8UNC-2A*70 | | 25 | 11-3161-0419 | Slide retainer plate | | 26 | 11-3161-0423 | Bolt, 3/8-16UNC-2AX40 | | 27 | B0093-10-59 | Spring Washer, 10 | | 28 | 11-3161-0424 | Steel Wire Φ1.6 | | 29 | 11-3161-0425 | Lock-fife |
|
|
|
| HHF—1300/1600 Fluid End |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0501-00 | Cylinder assembly | | 2 | 11-3161-0502 | Cylinder Cover, Threaded ring | | 3 | 11-3161-0503 | Cylinder Cover, Threaded ring | | 4 | 11-3161-0504-00 | Spacer assembly | | 5 | 11-3161-0505-00 | Guide, valve lower | | 6 | 11-3161-0506-00 | Plug, cylinder cover | | 7 | 11-3161-0507 | Positioning panel | | 8 | 11-3161-0508 | Seal ring, cylinder cover | | 9 | 11-3161-0509 | Discharge manifold | | 10 | 11-3161-0510 | Valve spring | | 11 | B34521-095-530-69 | O ring, 95*5.3 G | | 12 | 11-3161-0511-00 | Valve assembly | | 13 | 11-3161-0512 | Seal ring, valve cover | | 14 | 11-3161-0513 | Valve cover | | 15 | 11-3161-0514 | Seal ring, liner | | 16 | 11-3161-0515 | Liner wear ring | | 17 | 11-3161-0516 | Liner retainer ring | | 18 | 11-3161-0517-00 | Liner retainer screw | | 19 | 11-3161-0518 | Piston rod | | 20 | 11-3161-0519-00 | Spraying pipe assembly | | 21 | B34521-200-700-69 | O ring, 200*7.0 G | | 22 | 11-3161-0520 | Locking Ring, Liner Retainer screw |
| 11-3161-0521-21 | Bi-metal liner 5 |
| 11-3161-0521-22 | Bi-metal liner 5 1/2 |
| 11-3161-0521-23 | Bi-metal liner 6 |
| 11-3161-0521-24 | Bi-metal liner 6 1/4 |
| 11-3161-0521-25 | Bi-metal liner 6 1/2 |
| 11-3161-0521-26 | Bi-metal liner 6 3/4 | | 23 | 11-3161-0521-11 | Ordinary liner 5 |
| 11-3161-0521-12 | Ordinary liner 5 1/2 |
| 11-3161-0521-13 | Ordinary liner 6 |
| 11-3161-0521-14 | Ordinary liner 6 1/4 |
| 11-3161-0521-15 | Ordinary liner 6 1/2 |
| 11-3161-0521-16 | Ordinary liner 6 3/4 |
| 11-3161-0521-17 | Ordinary liner 7 | | 24 | 11-3161-0522-00 | Clamp assembly, piston rod | | 25 | 11-3161-0523 | Splash Shield, liner | | 26 | 11-3161-0524-00 | Piston | | 27 | 11-3161-0542 | Bolt, 7/8-9UNC-2A*60 | | 28 | 11-3161-0525-00 | Suction manifold | | 29 | 11-3161-0526-00 | Shim | | 30 | 11-3161-0527 | Guide, valve (upper) | | 31 | 11-3161-0528 | Stud, 1 1/2-8UN-2A*265 | | 32 | 11-3161-0501-06 | Nut, 1 1/2-8UN-2B (SPL) | | 33 | 11-3161-0529 | Baffle | | 34 | 11-3161-0530 | Bolt, 3/8-16UNC-2A*20 | | 35 | 11-3161-0531 | Seal ring, piston | | 36 | 11-3161-0532-00 | Nut, piston | | 37 | B34521-190-700-69 | O ring, 190*7.0 G | | 38 | 11-3161-0533-00 | Suction damper | | 39 | B34521-345-700-69 | O ring, 345*7.0 G | | 40 | 11-3161-0534 | Suction flange ( I ) | | 41 | 11-3161-0535 | Suction flange (II) | | 42 | 11-3161-0543 | Nut, 1 1/16-8UN-2B (SPL) | | 43 | 11-3161-0544 | Bolt 1 1/16-8UN-2A*90 | | 44 | 11-3161-0545 | Steel wire, Φ1.60 (L=1830) | | 45 | 11-3161-0536 | Screw plug, NPT1 1/2 | | 46 | 11-3161-0537 | Bolt, 1 1/2 | | 47 | 11-3161-0546 | Sealant: | | 48 | 11-3161-0538 | Plug, suction let, 12″ | | 49 | 11-3161-0539 | Closure plate, discharge let, 5 1/8″ | | 50 | 11-3161-0540 | Washer, 39 | | 51 | 11-3161-0541-00 | Spring guide | | R1 | 11-3161-0501-02 | Stud, 1-8UNC (14UNS) -2A*185 | | R2 | 11-3161-0501-03 | Nut, 1-8UNC-2B (SPL) | | R3 | 11-3161-0501-04 | Stud, 1 1/2-8UN (12UNF) -2A*170 | | R4 | 11-3161-0501-06 | Nut, 1 1/2-8UN-2B (SPL) | | R5 | 11-3161-0501-05 | Stud, 1 1/2-8UN (12UNF) -2A*120 | | R6 | 11-3161-0501-07 | Stud, 1 1/4-8UN (12UNF) -2A*195 | | R7 | 11-3161-0501-08 | Nut, 1 1/4-8UN-2B (SPL) |
|
|
|
| HHF—1300/1600 Suction Damper |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0533-01 | Diaphragm | | 2 | 11-3161-0533-02 | End cover |
|
|
|
| HHF—1300/1600 Discharge Filter Screen and Assistant Pipe (1) |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-2401-00 | Filter screen assembly | | 2 | B34521 -165-700-69 | O ring, 165*7.0G | | 3 | 11-3161-2402 | Discharge Elbow | | 4 | 11-3161-25 | Flange 5 1/8*35 | | 5 | 11-3161-23 | Gasket, R44 | | 6 | 11-3161-2403 | Stud Bolt, 1 1/2-8UN(12UNF)-2A*128 | | 7 | 11-3161-2404 | Nut, 1 1/2-8UN-2B (SPL) | | 8 | 11-3161-1510 | Pressure gauge, 0~60MPa(0~8700PSi) | | 9 | 11-3161-2201-03 | Bushing | | 10 | 11-3161-2201-00 | Seat, pressure gauge | | 11 | 11-3161-2206 | Gasket, R27 | | 12 | 11-3161-2203-00 | Discharging cross | | 13 | 11-3161-0546 | Sealant | | 14 | 11-3161-2204 | Stud Bolt, 1 1/16-8UN-2A*170 | | 15 | 11-3161-2205 | Nut, 1 1/16-8UN-2B (SPL) | | 16 | 11-3161-2202-00 | Pipe, relief valve | | R1 | 11-3161-2800 | Relieve valve JA-3 | | R2 | 11-3161-2700 | KB-75 damper |
|
|
|
| HHF—1300/1600 Discharge Filter Screen and Assistant Pipe (2) |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-2401-00 | Filter screen assembly | | 2 | B34521 -165-700-69 | O ring 165*7.0G | | 3 | 11-3161-2402 | Discharge elbow | | 4 | 11-3161-25 | Flange, 5 1/8*35 | | 5 | 11-3161-23 | Gasket R44 | | 6 | 11-3161-2403 | Stud Bolt, 1 1/2-8UN(12UNF)-2A*128 | | 7 | 11-3161-2404 | Nut, 1 1/2-8UN-2B (SPL) | | 8 | 11-3161-2501 | Pressure gauge, union type, 0~6000PSi | | 9 | 11-3161-2202-1 | Seat, pressure gauge | | 10 | 11-3161-2204-1 | Gasket, R35 | | 11 | 11-3161-2203-1 | Discharge cross | | 12 | 11-3161-2502 | Sealant | | 13 | 11-3161-2205-1 | Stud Bolt, 1 1/8-8UN(12UNF)-2A*90 | | 14 | 11-3161-2206-1 | Nut, 1 1/8-8UN-2B (SPL) | | 15 | 11-3161-32-1 | Flange, blind, 5 1/8*35 | | R2 | 11-3161-2700 | KB-75 damper |
|
|
|
| HHF—1300/1600 Power End Lubricating Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0601 | Key, 3/16*3/16*25.4 | | 2 | 11-3161-0602-00 | Gear oil pump | | 3 | 11-3161-0603 | Pipe joint, 90° 11/16-16UN-2A-NPT1/4 | | 4 | 11-3161-0604 | Bolt, hollow | | 5 | 11-3161-0632 | Screw, 5/16-18U NC-2A*40 | | 6 | 11-3161-0605 | Pipe joint, 90° 15/16-16UN-2A-NPT1/2 | | 7 | 11-3161-0606 | Pipe joint, 90° 1/2-20UNF-2A-NPT1/4 | | 8 | 11-3161-0607 | Pipe joint, 90° 5/8-16UN-2A-NPT1/4 | | 9 | B1527-08-00-0305 | Pipe, copper Φ8*305 | | 10 | 11-3161-0608 | Nut, 1/2-20UNF-2B | | 11 | 11-3161-0609 | Seat (II) | | 12 | 11-3161-0610 | Straight pipe 15/16-16UN-2A-NPT1/2 | | 13 | B1527-16-00-0686 | Pipe, copper Φ16*686 | | 14 | B1527-16-00-0331 | Pipe, copper Φ16*331 | | 15 | 11-3161-0611-00 | Pipe clamp (I) | | 16 | 11-3161-0612 | Pipe joint, 45° | | 17 | B1527-10-00-0838 | Pipe, copperΦ10*838 | | 18 | B1527-12-00-0305 | Pipe, copperΦ12*305 | | 19 | 11-3161-0613-00 | Pipe clamp Φ8 | | 20 | B1527-08-00-0762 | Pipe, copper Φ8*762 | | 21 | B1527-08-00-0508 | Pipe, copper Φ8*508 | | 22 | B1527-08-00-0762 | Pipe, copper Φ8*229 | | 23 | 11-3161-0614 | Pipe plug, NPT 1/4 | | 24 | B1527-08-00-0915 | Pipe, copper Φ8*915 | | 25 | B1527-08-00-1194 | Pipe, copper Φ8*1194 | | 26 | B1527-08-00-1016 | Pipe, copper Φ8*1016 | | 27 | 11-3161-0615 | Seat (I) | | 28 | 11-3161-0616 | Nut, 5/8-16UN-2B | | 29 | 11-3161-0617-00 | Pipe clampΦ12 | | 30 | 11-3161-0618 | Gasket | | 31 | 11-3161-0633 | Bolt, 1/4-20UNC-2A*20 | | 32 | 11-3161-0619 | Nozzle | | 33 | B1527-12-00-0610 | Pipe, copper Φ12*610 | | 34 | B1527-08-00-0813 | Pipe, copperΦ 8*813 | | 35 | 11-3161-0620 | Straight pipe 1/2-20UNF-2A | | 36 | 11-3161-0621-00 | Double pipe clamp Φ8 | | 37 | B1527-10-00-1956 | Pipe, copperΦ 10*1956 | | 38 | B1527-08-00-1956 | Pipe, copperΦ 8*1956 | | 39 | B1527-08-00-2311 | Pipe, copperΦ 8*2311 | | 40 | B1527-08-00-1600 | Pipe, copperΦ8*1600 | | 41 | B1527-08-00-1245 | Pipe, copperΦ8*1245 | | 42 | 11-3161-0622 | Pipe joint NPT1/4-9/16-16UN-2B | | 43 | 11-3161-0623 | Washer | | 44 | 11-3161-0624-00 | Shim set | | 45 | 11-3161-0625-00 | Seat | | 46 | 11-3161-0626 | Straight joint 5/8-16UN-2A | | 47 | B0093-08-59 | Washer 8 | | 48 | 11-3161-0634 | Overflow valve | | 49 | B0093-06-59 | Washer 6 | | 50 | 11-3161-0635 | Gear oil pump, 2S | | 51 | 11-3161-0636 | Pressure, gauge 0~1.6MPa(0~230PSi) | | 52 | 11-3161-0627 | Straight joint, 11/16-16UN-2A-NPT3/8 | | 53 | 11-3161-0628-00 | Oil filter | | 54 | 11-3161-0637 | Sealant | | 55 | 11-3161-0629 | Nut, 11/16-16UN-2B | | 56 | 11-3161-0630 | Nut, 15/16-16UN-2B | | 57 | 11-3161-0631 | Straight joint, 1/2-20UNF-2A-NPT1/4 |
|
|
|
| HHF—1300/1600 Liner Wash Pump Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-0801-00-1 | Guard |
| 11-3161-0801-00-2 | Guard | | 2 | 11-3161-0802 | Belt pulley | | 3 | 11-3161-0803-00 | Seat assembly | | 4 | 11-3161-0804 | Joint, short, NPT1-1-11 1/2NPSC | | 5 | 11-3161-0805 | Joint, NPT1 | | 6 | 11-3161-0806 | Joint, 1-11 1/2NPSC -1 1/4-12UNF-2A | | 7 | 11-3161-0807 | Joint, NPT2 1/2 | | 8 | 11-3161-0808 | Joint, short, NPT2 1/2 | | 9 | 11-3161-0818 | Hose, L=1500 | | 10 | 11-3161-0809-00 | Hose joint, 022*037 | | 11 | 11-3161-0810 | Elbow, 90°, NPT1 | | 12 | 11-3161-0811 | Connecting board | | 13 | 11-3161-0812-00 | Water case | | 14 | 11-3161-0813-00 | Case cover | | 15 | 11-3161-0814 | Pipe plug, NPT2 1/2 | | 16 | 11-3161-0815 | Shim | | 17 | 11-3161-0816 | Flange, NPT1 | | 18 | 11-3161-0819 | Screw, 5/16-18 U N C-2 A*2 5 | | 19 | B1171-A3708 | V belt, A3708 | | 20 | 11-3161-0820 | Pipe clamp, No:3 | | 21 | 11-3161-0821 | Hose, L=750 | | 22 | 11-3161-0822 | Elbow 90°, NPT2 1/2 | | 23 | 11-3161-0823 | Bolt, 5/8-11UNC-2A*50 | | 24 | B0848-16-32 | Flat washer, 16 | | 25 | B0093-16-59 | Spring washer, 16 | | 26 | 11-3161-0824 | Bolt 1/2-13UNC-2A*40 | | 27 | B0093-14-59 | Spring washer, 14 | | 28 | B0096-14-59 | Washer, 14 | | 29 | 11-3161-0825 | Bolt, 1/2-13UNC-2A*60 | | 30 | 11-3161-0826 | Nut, 1/2-13UNC-2B | | 31 | 11-3161-0827 | Spraying pump | | 32 | 11-3161-0828 | Ball valve, 1-11 1/2NPSC | | 33 | 11-3161-0817-00 | Support |
|
|
|
| HHF-1300/1600 KB-75 Damper Assembly |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-2701 | Ring gasket, R39 | | 2 | 11-3161-2702 | Plug | | 3 | 11-3161-2703-00 | Diaphragm (bladder) | | 4 | 11-3161-2704-00 | Dampener body | | 5 | 11-3161-2705 | Cover | | 6 | 11-3161-2706 | Tee, NPT1/4 | | 7 | 11-3161-2707 | Joint, NPT1/4 | | 8 | 11-3161-2708-00 | Guard, pressure gauge | | 9 | 11-3161-2709-00 | Bleeder valve | | 10 | 11-3161-2710-01 | Pressure, gauge,0~25MPa(0~3630PSi) | | 11 | 11-3161-2710-02 | Check valve | | 12 | 11-3161-2710 | Washer | | R1 | 11-3161-2704-02 | Stud bolt, 1 1/2-8UN(12UNF)-2A*120 | | R2 | 11-3161-2704-03 | Nut,1 1/2-8UN-2B (SPL) | | R3 | 11-3161-2704-04 | Stud bolt, 1 1/4-8UN(12UNF)-2A*100 | | R4 | 11-3161-2704-05 | Nut, 1 1/4-8UN-2B (SPL) |
|
|
|
| HHF-1300/1600 Charging Hose of Damper |
| | No. | P/N(HHF-1300/1600) | Description |
| 11-3161-2711-00 | Charging hose of damper | | 1 | 11-3161-2711-01 | Nut, 3/4-16UNF-2B | | 2 | 11-3161-2711-02 | Inlet adapter | | 3 | 11-3161-2711-03 | Adapter fitting | | 4 | 11-3161-2711-04 | Seal washer | | 5 | 11-3161-2711-05 | Pipe collar | | 6 | 11-3161-2711-06 | Rubber pipe, 6I-2500 |
|
|
|
| HHF-1300/1600 JA—3 Relief Valve |
| | No. | P/N(HHF-1300/1600) | Description | | 1 | 11-3161-2801 | Joint | | 2 | 11-3161-2802 | Retainer ring | | 3 | 11-3161-2803-00 | Piston assembly | | 4 | 11-3161-2804 | Valve | | 5 | 11-3161-2805 | Piston rod | | 6 | 11-3161-2806 | Cushion | | 7 | 11-3161-2807 | Elastic straight pin | | 8 | 11-3161-2808 | Locking spring | | 9 | 11-3161-2809 | Safety guard | | 10 | 11-3161-2810 | Plate, shear pin | | 11 | 11-3161-2811 | Shear pin | | 12 | 11-3161-2812 | Warning plate | | 13 | 11-3161-2813 | Pin | | 14 | 11-3161-2814 | Retainer ring, steel wire | | 15 | 11-3161-2815 | Nameplate | | 16 | 11-3161-2816 | Pin, 4*26 | | 17 | 11-3161-2817 | Screw, 8 (0.164) -32UNC-2A*16 | | 18 | 11-3161-2818 | Nut, 8 (0.164) -32UNC-2B | | 19 | 11-3161-2819 | Bolt, 3/8-16UNC-2A*105 | | 20 | 11-3161-2820 | Nut, 3/8-16UNC-2B (SPL) | | 21 | 11-3161-2821 | Screw, 5 (0.125) -40UNC-2A*8 |
|
|
|
| HHF-1300/1600 Valve Assembly |
| | No. | Part No. (HHF-1300/1600) | Part Name | | 1 | 11-3161-0511-01 | Valve Body | | 2 | 11-3161-0511-02 | Valve Nut | | 3 | 11-3161-0511-03 | Circlip | | 4 | 262 | Sealant: 262 | | 5 | 11-3161-0511-04 | Gland | | 6 | B0308-005 | Steel Ball:Φ5 | | 7 | 11-3161-0511-05 | Valve Rubber | | 8 | 11-3161-0511-07 | Valve Guide | | 9 | 11-3161-0511-06 | Valve Cup | | 10 | 11-3161-0511-01-00 | Valve Body Complete (Remark: this item includes the part from item1~8) |
|
|
|
| HHF-1300/1600 Piston |
| | No. | Part No. (HHF-1300/1600) | Part Name | | 1 | 11-3161-0524-0100 | Piston: 5 1/2 | | 2 | 11-3161-0524-0200 | Piston: 6 | | 3 | 11-3161-0524-0300 | Piston: 6 1/4 | | 4 | 11-3161-0524-0400 | Piston 6 1/2 | | 5 | 11-3161-0524-0500 | Piston: 6 3/4 | | 6 | 11-3161-0524-0600 | Piston: 7 |
|
|
|
| HHF-1300/1600 Piston Rubber |
| | No. | Part No. (HHF-1300/1600) | Part Name | | 1 | 11-3161-0524-0102-00 | Rubber 5 1/2 | | 2 | 11-3161-0524-0202-00 | Rubber 6 | | 3 | 11-3161-0524-0302-00 | Rubber 6 1/4 | | 4 | 11-3161-0524-0402-00 | Rubber 6 1/2 | | 5 | 11-3161-0524-0502-00 | Rubber 6 3/4 | | 6 | 11-3161-0524-0602-00 | Rubber 7 |
|
|
|
| HHF-1300/1600 Cylinder (block) assembly |
| | No. | Part No. (HHF-1300/1600) | Part Name | | 1 | 11-3161-0501-01 | Fluid end (not nickel plating) | | 2 | 11-3161-0501-02 | Stud bolt: 1-8UNC (14UNS) -2A*185 | | 3 | 11-3161-0501-03 | Nut: 1-8UNC-2B (SPL) | | 4 | 11-3161-0501-04 | Stud bolt: 1 1/2-8UN (12UNF) -2A*170 | | 5 | 11-3161-0501-05 | Stud bolt: 1 1/2-8UN (12UNF) -2A*120 | | 6 | 11-3161-0501-06 | Nut: 1 1/2-8UN-2B (SPL) | | 7 | 11-3161-0501-07 | Stud bolt: 1 1/4-8UN (12UNF) -2A*195 | | 8 | 11-3161-0501-08 | Nut: 1 1/4-8UN-2B (SPL) | | 9 | 11-3161-0501-09 | Anaerobic fluid sealant 277 |
|
|
|
| Special Tools List For HHF—1300 / 1600 Mud Pump |
| | No. | P/N(HHF-1300/1600) | Description |
| 11-3161-2600 | Special tools | | 1 | 11-3161-2601-00 | Stick, liner cover | | 2 | 11-3161-2602-00 | Hosting tool for liner | | 3 | 11-3161-2603 | Socket spanner, 2 3/8″ | | 4 | 11-3161-2604 | Socket spanner, 2″ | | 5 | 11-3161-2605 | Socket spanner, 3 5/8″ | | 5 | 11-3161-2606 | Socket spanner, 1 1/2″ | | 7 | 11-3161-2607 | Socket spanner, 1 5/8″ | | 8 | 11-3161-2608 | Extension rod, 19 5/8″ | | 9 | 11-3161-2609 | Extension rod, 8″ | | 10 | 11-3161-2610 | connector, 1″ | | 11 | 11-3161-2611 | Extension rod, 24″ | | 12 | 11-3161-2611-01 | Chain block, SH1/2 | | 13 | 11-3161-2611-02 | Manual oil pump, 0 ~ 63 MPa ( 0 ~ 9150psi) | | 14 | 11-3161-2612-00 | Hydraulic puller | | 15 | 11-3161-2613 | Intermediate taper sleeve | | 16 | 11-3161-2614 | Pressing sleeve | | 17 | 11-3161-2615-00 | Socket spanner, long | | 18 | 11-3161-2616 | Bolt, 1-8UNC-2AX 160 | | 19 | 11-3161-2611-03 | Allen wrench, 5/8″ | | 20 | 11-3161-2617-00 | Insert plate puller | | 21 | 11-3161-2618 | Socket spanner, 1 11/16″ | | 22 | 11-3161-2711-00 | Charging hose of dampener |
|
|
Telephone
E-MAIL