|
| 8-3/8”Near Bit Stabilizer IB Type ( OD 8-11/32″,ID 2-13/16″,Fishing OD 6-1/2″,28″fishing neck length,16″wall contact 2-3/8″blade width,overall length 70″,4-1/2”IF Box x 4-1/2” REG Box ) | | 8-3/8″ String Stabilizer, IB type( OD 8-11/32″,Fishing OD 6-1/2″,28″fishing neck length,16″wall contact 2-3/8″blade width,overall length 75″,4-1/2”IF Pin x Box) | | 5-7/8”Near Bit Stabilizer IB Type( OD 5-7/8”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” REG Box) | | 5-7/8″ String Stabilizer, IB type( OD 5-7/8”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” IF Pin) | | 6”Near Bit Stabilizer IB Type( OD 6”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” REG Box) | | 6”String Stabilizer, IB type( OD 6”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” IF Pin) | | 6-1/8”Near Bit Stabilizer IB Type( OD 6-1/8”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” REG Box) | | 6-1/8”String Stabilizer, IB type( OD 6-1/8”,ID 2″,Fishing OD 4-3/4″,20″fishing neck length,11-3/4″wall contact 2-3/16″blade width,overall length 60″,3-1/2”IF Box x 3-1/2” IF Pin) | 12 1/4″ String Integral Stabilizer( OD 12 1/4″ ID 2-13/16″,Fishing OD 8″,20″fishing neck length,12″wall contact, 3″blade width,overall length 66″,
w/c 6-5/8 REG Pin x Box conn.) | 12-1/4” Near Bit Integral Stabilizer (Bored for float)
( OD 12 1/4″ ID 2-13/16″,Fishing OD 8″,20″fishing neck length,12″wall contact, 3″blade width,overall length 66″,
w/c 6-5/8 REG Box x Box conn.) | | 8 1/2″ String Integral Stabilizer( OD 8-1/2″,ID 2-13/16″,Fishing OD 6-1/2″,28″fishing neck length,16″wall contact 2-1/4″blade width,overall length 75″,4”IF Box x 4 IF “Pin ) | | 8-1/2”Near Bit Integral Stabilizer (Bored for float) ( OD 8-1/2″,ID 2-13/16″,Fishing OD 6-1/2″,28″fishing neck length,16″wall contact 2-1/4″blade width,overall length 70″,4-1/2”REG Box x 4 IF ” Box ) | | 16″ String Integral Stabilizer( OD 16″, ID 3″,Fishing OD 9-1/2″,24″fishing neck length,16″wall contact, 3-1/2″blade width,overall length 70″,w/c 7-5/8 REG Pin x Box conn.) | | 16”Near Bit Integral Stabilizer (Bored for float)( OD16″ ,ID 3″,Fishing OD 9-1/2″,24″fishing neck length,16″wall contact, 3-1/2″blade width,overall length 70″,w/c 7-5/8 REG Box x Box conn.) | | 17- 1/2″ String Integral Stabilizer( OD 17- 1/2″, ID 3″,Fishing OD 9-1/2″,24″fishing neck length,16″wall contact, 3-1/2″blade width,overall length 70″,w/c 7-5/8 REG Pin x Box conn.) | | 17-1/2”Near Bit Integral Stabilizer (Bored for float)( OD 17- 1/2″ ,ID 3″,Fishing OD 9-1/2″,24″fishing neck length,16″wall contact, 3-1/2″blade width,overall length 70″,w/c 7-5/8 REG Box x Box conn.) | | 22″ INTEGRAL BLADE NEAR BIT STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″,26″fishing neck length,18″wall contact, 3-1/2″blade width,overall length 80″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 22″ INTEGRAL BLADE STRING STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″, 26″fishing neck length,18″wall contact, 3-1/2″blade width,overall length 80″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 24″ INTEGRAL BLADE NEAR BIT STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″,26″fishing neck length,20″wall contact, 4″blade width,overall length 90″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 24″ INTEGRAL BLADE STRING STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″, 26″fishing neck length,20″wall contact, 4″blade width,overall length 90″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 26″ INTEGRAL BLADE NEAR BIT STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″,26″fishing neck length,20″wall contact, 4″blade width,overall length 90″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 26″ INTEGRAL BLADE STRING STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″, 26″fishing neck length,20″wall contact, 4″blade width,overall length 90″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 28″ INTEGRAL BLADE NEAR BIT STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | 28″ INTEGRAL BLADE STRING STABLIZERS, BODY MANDRIL OD 9 1/2″, ID3″, 7 5/8″ REG. BOX UP& DOWN CONNECTION. WITH BUTTON TYPE TUNGSTEN CARBIDE INSERTS HARD FACING ON ALL RIBS AND ON BOTTOM BEVEL OF EACH RIB | | Replaceable sleeve type stabilizers having 7-5/8” API regular connection for 26” hole | | Replaceable sleeves against above item nos. 1 | | 17-1/2” replaceable sleeve type in-string stabilizer with mandrel size 9-1/2” OD & 7-5/8” API regular connections | | Replaceable sleeves against item nos. 2 | | Replaceable sleeve type near bit stabilizers with mandrel 8” OD, 6-5/8” API Reg. Connection. These stabilizer shall be used in conjunction with 12-1/4” sleeve. | | Replaceable sleeve type in string stabilizers with mandrel 8” OD, 6-5/8” API Reg. Connection. These stabilizer shall be used in conjunction with 12-1/4” sleeve. | | Replaceable sleeves against item nos. 3 & 4 | | 8-1/2” near bit replaceable sleeve type stabilisers having 4” IF box up x 4-1/2” reg box down connection | | 8-1/2” instring replaceable sleeve type stabilizers with 4” IF box up x pin down connection | | Replaceable sleeves against item nos. 2 | | Non-rotating rubber sleeve stabilizer for 5” OD drill pipe with sufficient number of extra rubber sleeves for using inside 9-5/8” casing | | Rubber sleevs | | For hole size 12″ rotating sleeve near bit stabilizer mandrel | | sleeves for above 12〃 | | For hole size 12″ rotating sleeve STRING stabilizer mandrel | | sleeves for above 12〃 |
|
|
Telephone
E-MAIL