|
| DRILL PIPE ELEVATOR |
|
|
| | 1 | CENTER LATCH | Elevators (complete) for 18deg tapered shoulder 5.1/2″ drill pipe, Model GG (DDZ), Centre Latch Type, Rated Capacity 350tons, manufacted to API 8A standard. |
|
| GG | | 2 | Elevators (complete) for 18deg tapered shoulder 5″ (127 mm) drill pipe, Model GG (DDZ127), Centre Latch Type, Rated Capacity 350tons, manufacted to API 8A standard. |
|
| GG | | 3 | Elevators (complete) for 18deg tapered shoulder 4.1/2″ drill pipe, Model GG (DDZ), Centre Latch Type, Rated Capacity 350tons, manufacted to API 8A standard. |
|
| GG | | 4 | Elevators (complete) for 18deg tapered shoulder 4″ drill pipe, Model GG (DDZ), Centre Latch Type, Rated Capacity 350tons, manufacted to API 8A standard. |
|
| GG | | 5 | Elevators (complete) for 18deg tapered shoulder 3.1/2″ drill pipe, Model GG (DDZ), Centre Latch Type, Rated Capacity 350tons, manufacted to API 8A standard. |
|
| GG | | 6 | Elevators (complete) for 18deg tapered shoulder 5-1/2″ drill pipe, Model MGG (DDZ), Centre Latch Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| MGG | | 7 | Elevators (complete) for 18deg tapered shoulder 5″ drill pipe, Model MGG (DDZ), Centre Latch Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| MGG | | 8 | Elevators (complete) for 18deg tapered shoulder 4-1/2″ drill pipe, Model MGG (DDZ), Centre Latch Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| MGG | | 9 | Elevators (complete) for 18deg tapered shoulder 4″ drill pipe, Model MGG (DDZ), Centre Latch Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| MGG | | 10 | Elevators (complete) for 18deg tapered shoulder 3-1/2″ (89 mm) drill pipe, Model MGG (DDZ101), Centre Latch Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| MGG | | 11 | Elevators (complete) for 18deg tapered shoulder 5-1/2″ drill pipe, Model RG (DDZ), Centre Latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DDZ150 (RG) | | 12 | Elevators (complete) for 18deg tapered shoulder 5″ drill pipe, Model RG (DDZ), Centre Latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DDZ150 (RG) | | 13 | Elevators (complete) for 18deg tapered shoulder 4-1/2″ drill pipe, Model RG (DDZ), Centre Latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DDZ150 (RG) | | 14 | Elevators (complete) for 18deg tapered shoulder 4″ drill pipe, Model RG (DDZ), Centre Latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DDZ150 (RG) | | 15 | Elevators (complete) for 18deg tapered shoulder 3-1/2″ (89 mm) drill pipe, Model RG (DDZ101), Centre Latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DDZ150 (RG) | | 16 | Elevators (complete) for 18deg tapered shoulder 3-1/2″ (89 mm) drill pipe, Model MG (DDZ101), Centre Latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| MG | | 17 | Elevators (complete) for 18deg tapered shoulder 2.7/8″ drill pipe, Model MG (DDZ), Centre Latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| MG |
|
| Elevator,manual,type:HGG,series:G,center latch, 500ton,bored for 5″ Drill Pipe,18 deg tapper. |
|
| HGG |
|
| Elevator,manual,type:HGG,series:G,center latch, 500ton,bored for 5.1/2″ Drill Pipe,18 deg tapper. |
|
| HGG |
|
|
|
|
|
| | DRILL COLLAR ELEVATOR |
|
|
|
| SIDE DOOR | Elevators (complete) for 90deg shoulder 9-1/2″ (241 mm) drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 9″drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 8.1/2″ drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 8.1/4″ (209 mm) drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 8″ drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 6.1/2″ drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 6.1/4″ drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 6″ drill collar, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 4-3/4″ (121 mm) drill collar, Model SLX, Side Door Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 2.7/8″ (73 mm) drill collar, Model SLX, Side Door Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| SLX |
| CENTER LATCH | Elevators (complete) for 90deg shoulder 9-1/2″ (241 mm) drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 9″drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 8.1/2″ drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 8.1/4″ (209 mm) drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 6.1/2″ drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 6″ drill collar, Model TA, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| TA/150 |
| Elevators (complete) for 90deg shoulder 4-3/4″ (121 mm) drill collar, Model TA, center latch Typee, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 4-1/4″ drill collar, Model TA, center latch Typee, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 2.7/8″ (73 mm) drill collar, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 | | CASING ELEVATOR |
|
|
|
| SIDE DOOR | Elevators (complete) for 90deg shoulder30″ casing, Model SLX, Side Door Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder24″ (610 mm) casing, Model SLX, Side Door Type, Rated Capacity 250tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 20″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 18.5/8″ (473 mm) casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 13.3/8″ (340mm) casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 11.3/4″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 10.3/4″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| 9 5/8″ SX 350 ton side door elevator |
|
| SLX |
| Elevators (complete) for 90deg shoulder 9.5/8″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 8.5/8″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 7.5/8″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 7″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder6.5/8″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 5.1/2″ casing, Model SLX, Side Door Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| SLX |
| Elevators (complete) for 90deg shoulder 4.1/2″ casing, Model SLX, Side Door Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| SLX | | TUBING ELEVATOR |
|
|
|
|
| Elevators (complete) for 90deg shoulder 4.1/2 EUE tubing, Model DD, center latch Type, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| DD/150 |
| Elevators (complete) for 90deg shoulder 4.1/2 EUE tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 4.1/2 NU tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 4 EUE tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 4 NU tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 3.1/2 EUE tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 3.1/2 NU tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder2.7/8 EUE tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder2.7/8 NU tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 2.3/8 EUE tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 |
| Elevators (complete) for 90deg shoulder 2.3/8 NU tubing, Model TA, center latch Type, Rated Capacity 100tons, manufacted to API 8A standard. |
|
| TA/100 | | SUCKER ROD ELEVATOR |
|
|
|
|
| Sucker rod elevator FOR EACH SIZE |
|
| SRE | | SINGLE JOINT ELEVATOR |
|
|
|
|
| Elevators (complete) for 24″ (610 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for20″ casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 18.5/8″ (473 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 13.3/8″ (340 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for9.5/8″ (244 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 8.5/8 casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 7″ (178 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 6.5/8″ casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 5tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 4-1/2″ (114 mm) casing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 4tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 3-1/2″ (89 mm) tubing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 4tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 2-7/8″ ( 73mm) tubing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 4tons, manufacted to API 8A standard. |
|
| SJ |
| Elevators (complete) for 2-3/8″ (60 mm) tubing, Model SJL , Single Joint Centre Latch Type, Rated Capacity 4tons, manufacted to API 8A standard. |
|
| SJ | | SLIP TYPE ELEVATOR |
|
|
|
|
| Elevators (complete) for 7.5/8 “casing, Model HYC, SlipType, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| HYC |
| Elevators (complete) for 7 “casing, Model HYC, SlipType, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| HYC |
| Elevators (complete) for 4.1/2 “casing, Model HYC, SlipType, Rated Capacity 150tons, manufacted to API 8A standard. |
|
|
|
| SLIP ASSEMBLY FOR HYC | 1 | SET |
|
| Elevators (complete) for 3.1/2 “casing, Model HYT, SlipType, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| HYT |
| Elevators (complete) for 2.7/8 “casing, Model HYT, SlipType, Rated Capacity 150tons, manufacted to API 8A standard. |
|
| HYT |
| SLIP ASSEMBLY FOR HYT | 1 | SET |
|
| Elevators (complete) for7 “casing, Model YC, SlipType, Rated Capacity 75tons, manufacted to API 8A standard. |
|
| YC |
| Elevators (complete) for 4-1/2″ (114 mm) casing, Model YC, SlipType, Rated Capacity 75tons, manufacted to API 8A standard. |
|
| YC |
| SLIP ASSEMBLY FOR YC | 1 | SET |
|
| Elevators (complete) for 3-1/2″ (89 mm) tubing, Model YT, Slip Type, Rated Capacity 75tons, manufacted to API 8A standard. |
|
| YT |
| Elevators (complete) for 2.7/8″ tubing, Model YT, Slip Type, Rated Capacity 75tons, manufacted to API 8A standard. |
|
| YT |
| SLIP ASSEMBLY FOR YT | 1 | SET |
|
| Elevators (complete) for 2.7/8″ tubing, Model MYT, Slip Type, Rated Capacity 40tons, manufacted to API 8A standard. |
|
| MYT |
| SLIP ASSEMBLY FOR MYT | 1 | SET |
| | ROTARY SLIPS |
|
|
|
| DRILL PIPE | Slips (complete) for 5.1/2″ drill pipe, Slip Body Size 5.1/2″, Model SDXL, Part Number 15519 , manufacted to API standard for use in API standard insert bowls. |
|
| SDXL |
| Slips (complete) for 5″ (127mm) drill pipe, Slip Body Size 5.1/2″, Model SDXL, Part Number 15520, manufacted to API standard for use in API standard insert bowls. |
|
|
|
| Slips (complete) for 5″ (127mm) drill pipe, Slip Body Size 5″, Model SDXL, Part Number 15516, manufacted to API standard for use in API standard insert bowls. |
|
| SDXL |
| Slips (complete) for 4.1/2″ drill pipe, Slip Body Size 4.1/2″, Model SDXL, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDXL |
| Slips (complete) for 3.1/2″ drill pipe, Slip Body Size 4.1/2″, Model SDXL, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDXL |
| Slips (complete) for 5.1/2″ drill pipe, Slip Body Size 5.1/2″, Model SDML, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 5″ (127mm) drill pipe, Slip Body Size 5″, Model SDML, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 4.1/2″ drill pipe, Slip Body Size 4.1/2″, Model SDML, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 3.1/2″ drill pipe, Slip Body Size 3.1/2″, Model SDML, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 2.7/8″ drill pipe, Slip Body Size 3.1/2″, Model SDML, Part Number 15523 , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 2.3/8″ drill pipe, Slip Body Size 3.1/2″, Model SDML, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDML |
| Slips (complete) for 3.1/2″ drill pipe, Slip Body Size 3.1/2″, Model SDS, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDS |
| Slips (complete) for 2.7/8″ drill pipe, Slip Body Size 3.1/2″, Model SDS, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDS |
| Slips (complete) for 2.3/8″ drill pipe, Slip Body Size 3.1/2″, Model SDS, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| SDS |
| DRILL COLLAR | Slips (complete) for 9-1/2″ (241mm) drill collar, Model DCS-L (size range 8-1/2″ to 10″), button type dies, Part Number 2530, manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| Slips (complete) for 8-1/2″ (241mm) drill collar, Model DCS-L (size range 8″ to 9.1/2″), button type dies, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| Slips (complete) for 8.1/4″ (209mm) drill collar, Model DCS-L (size range 6.3/4″ to8.1/4″), button type dies, Part Number 2503, manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| Slips (complete) for 6-1/2″ (165mm) drill collar, Model DCS-R (size range 5-1/2″ to 7″), button type dies, Part Number 2550, manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| Slips (complete) for 4.3/4 drill collar, Model DCS-R (size range 5-1/2″ to 7″), button type dies, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| Slips (complete) for 4-1/4″ drill collar, Model DCS-S (size range 4″ to 4.7/8″), button type dies, Part Number 2573, manufacted to API standard for use in API standard insert bowls. |
|
| DCS |
| CASING | Slips (complete) for 24″ (610mm) casing, Model CMS-XL, button type dies, Part Number 5331, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 20″ casing, Model CMS-XL, button type dies, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 18.5/8″ (473mm) casing, Model CMS-XL, button type dies, Part Number 5333, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 13.3/8″ (340mm) casing, Model CMS-XL, button type dies, Part Number 5313, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 9.5/8″ (244mm) casing, Model CMS-XL, button type dies, Part Number 5307, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 8.5/8″ casing, Model CMS-XL, button type dies, Part Number , manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 7″ (178mm) casing, Model CMS-XL, button type dies, Part Number 5301, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 5.1/2″ casing, Model CMS-XL, button type dies, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL |
| Slips (complete) for 4.1/2″ casing, Model CMS-XL, button type dies, manufacted to API standard for use in API standard insert bowls. |
|
| CMS-XL | | spare parts for rotary slips |
|
|
|
|
| circular buttons for 8″-9.1/2″ Oddrill collar slips VARCO Bjtype DCS-L P/No.:2630-96 |
|
| set |
|
| circular buttons for 5.1/2″-7″ Oddrill collar slips VARCO Bjtype DCS-L P/No.:2630-63 |
|
| set |
|
| circular buttons for 4″-4.7/8″ Oddrill collar slips VARCO Bjtype DCS-L P/No.:2620-49 |
|
| set |
|
| insert for 5″ drill pipe rotary slips VARCO BJ type SDXL P/No.2169-54 |
|
| set |
|
| insert for 3.1/2″ drill pipe rotary slips VARCO BJ type SDXL P/No.2163-54 |
|
| set |
|
| insert for 2.7/8″ drill pipe rotary slips VARCO BJ type SDXL P/No.2161-30 |
|
| set |
|
|
Telephone
E-MAIL