|
YAN CHENG SANYI WELL CONTROL EQUIPMENT AND PARTS | Standpipe manifold | | 1 |
| Standpipe Manifold “H” Assembly |
|
|
| | 2 |
| Standpipe Manifold Skid |
|
|
| | 3 |
| 5″ Stand Pipe Assembly |
|
|
|
|
|
|
|
|
| | BOP RAMS | | 1 |
| 95/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
|
| | 2 |
| 51/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
|
| | 3 |
| 27/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
|
| | 4 |
| 5″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
|
| | 5 |
| Blind ram for Cameron double ram BOP 135/8″ 10000psi |
|
|
|
|
|
|
|
|
| | CHOKE MANIFOLD | | 1 |
| Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet) |
|
|
| | 2 |
| Control panel for Choke manifold with stroke counter |
|
|
| | 3 |
| 4 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT |
|
|
| | 4 |
| Choke Manifold, 21/16” 5000psi, see drawing |
|
|
| | 5 |
| Choke & kill manifold:
Consist of equipment as following
– Mounted on oil field skid
– Pressure rating 10,000psi
– Kill and choke manifolds are anti H2S
– The bore diameter of two side in choke manifold is 4-1/16″
Including
– 0 – 15000 psi range pressure gauge (1) no
– Hydraulic actuated choke valve (1) no
– Manual operated choke valve (2) nos
– 4-1/16″ Manual gate valve (12) nos
– 4-1/16″ Hydraulic gate valve (1) no
– Remote control panel at drilling rig floor (1) no
(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.) | 1 | EA |
|
|
|
|
|
|
| | Kill manifold | | 1 |
| Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet) |
|
| 89,895.00 |
|
|
|
|
|
| | KOOMEY TEST PUMP & ACCESSORIES | | 1 |
| 0 – 10000psi with fill & feed pump, test pump, test pressure gauge |
|
|
| | 2 |
| Koomey Unit to suit the 11” BOP (type FKQ640-6) |
|
|
| | 3 |
| Koomey Unit to suit the 7 1/16” BOP. |
|
|
| | 4 |
| BOP CONTROL UNIT (KOOMY)
Production model: FK125-3 control device
The assembly consist of : remote control console, common enclosure and explosion-proof electric instrument
1. Controlled object: annulus, blind and semi-enclosed
2. Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear
3. VOLUME of oil reservoir: 440L
4. Motor power: 7.5kw
5. System working pressure: 21MPa |
| set |
|
|
|
|
|
|
| | CROSS OVER SUB | | 1 |
| 6-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs |
|
|
| | 2 |
| 4” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs |
|
|
| | 3 |
| 6-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection |
|
|
| | 4 |
| 6-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections |
|
|
| | 5 |
| 8” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub |
|
|
| | 6 |
| 4-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub |
|
|
| | 7 |
| Double pin sub of undernoted connection with appropriate OD x ID
a) 4” IF x 4-1/2” API Reg |
|
|
| | 8 |
| Double pin sub of undernoted connection with appropriate OD x ID
b) 6-5/8” R |
|
|
| | 9 |
| Double pin sub of undernoted connection with appropriate OD x ID
c) 6-5/8” R – 7-5/8” R |
|
|
|
|
|
|
|
|
| | WELL CONTROL ACCESSORIES | | 1 |
| One no. Kelly cock suitable for 41/2″ IF drill pipe connection |
|
|
| | 2 |
| Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections |
|
|
| | 3 |
| Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections |
|
|
| | 4 |
| 5″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connections |
|
|
|
|
|
|
|
|
| | Kelly cock and valve | | 1 |
| Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″ |
|
|
| | 2 |
| Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″ |
|
|
| | 3 |
| Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ |
|
|
| | 4 |
| Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ |
|
|
| | 5 |
| Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ |
|
|
| | 6 |
| Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ |
|
|
| | 7 |
| Test Pump 15000PSI with Chart Recorder |
|
|
| | 8 |
| Plug Valve Repair Kit;2”X5000psi |
|
|
| | 9 |
| Plug Valve Repair Kit;2”X10000psi |
|
|
| | 10 |
| Plug Valve Repair Kit;2”X15000psi |
|
|
| | 11 |
| Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI |
|
|
| | 12 |
| Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI |
|
|
| | 13 |
| Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSI |
|
|
|
|
|
|
|
|
| | BOP | | 1 |
| 71/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 2 |
| 71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set |
| | 3 |
| 71/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-3,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 4 |
| 71/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-10,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set |
| | 5 |
| 71/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 6 |
| 71/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set |
| | 7 |
| 11″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 8 |
| 11″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 9 |
| 11″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 10 |
| 11″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 11 |
| 11″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 12 |
| 11″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 13 |
| 135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 14 |
| 135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 15 |
| 135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 16 |
| 135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 17 |
| 135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 18 |
| 135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 19 |
| 71/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 20 |
| 71/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set |
| | 21 |
| 11″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 22 |
| 11″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 23 |
| 135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set |
| | 24 |
| 135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set |
| | 25 |
| 11” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set |
| | 26 |
| 135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set |
| | 27 |
| 7 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe rams |
| set |
| | 28 |
| 7 1/16” 3000psi Annular BOP |
| set |
| | 29 |
| Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each. |
| set |
| | 30 |
| Control System for Surface Mounted BOP Stacks, FKQ840-8 |
| set |
| | 31 |
| DOUBLE RAM BOP
71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Studded 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set |
| | 32 |
| Ram assembly
27/8” Ram sub assembly for 71/16″-5,000psi ram bop |
| set |
| | 33 |
| Ram assembly
31/2” Ram sub assembly for 71/16″-5,000psi ram bop |
| set |
| | 34 |
| ANNULAR BOP
71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set |
|
|
|
|
|
|
|
|
|
|
|
|
| | ADAPTOR FLANGE | | 1 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETS |
| nos |
| | 2 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETS |
| nos |
| | 3 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS |
| nos |
| | 4 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS |
| nos |
|
|
|
|
|
|
| | Blind flange | | 1 |
| 21 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″ |
| nos | 85,000.00 | | 2 |
| 13 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″ |
| nos |
|
|
|
|
|
|
| | Choke lines and kill lines | | 1 |
| COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 4-1/16” 10000psi HCR valve
– two (2) 4-1/16” 10000psi manual gate valve
– two (2) 4-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205
– six (6) ring gasket, BX-155 |
| set |
| | 2 |
| COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 2-1/16” 10000psi HCR valve
– two (2) 2-1/16” 10000psi manual gate valve
– two (2) 2-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 3/4” x 135
– six (6) ring gasket, BX-152 |
| set |
| | 3 |
| Choke line: Consists of (2) valves
– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no
– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no
– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos | 1 | set |
| | 4 |
| Kill line: Consists of (3) valves
– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no
– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no
– Check valve (2-9/16″ x 10,000 psi) 1-no
– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos | 1 | set |
|
|
|
|
|
|
| | Gate valve | | 1 |
| Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. |
| nos | 12,000.00 | | 2 |
| Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated. |
| nos | 16,500.00 | | 3 |
| Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. |
| nos | 7,200.00 | | 4 |
| Gate valve, 2-1/16” 5000psi | 1 | nos | 3,800.00 | | 5 |
| Gate valve, 2-9/16” 5000psi | 1 | nos | 4,800.00 | | 6 |
| Gate valve, 3-1/8” 5000psi | 1 | nos |
| | 7 |
| Gate valve, 4-1/16” 5000psi | 1 | nos |
|
|
|
|
|
|
| | Others | | 1 |
| Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet. |
| nos |
| | 2 | Studded cross | Studded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. |
| nos |
| | 3 | Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos |
| | 4 | Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos |
| | 5 | Flanged spool | Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mm |
| nos |
| | 6 | Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mm |
| nos |
| | 7 |
| 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded |
| nos |
| | 8 |
| 41/16″ x 10000psi Blind flanged |
| nos |
| | 9 |
| DSA, 41/16″ 10000psi x 31/16″ x 10000psi |
| nos |
| | 10 |
| Ring gasket API BX-155 |
| nos |
| | 11 |
| Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 12 |
| Ring gasket API BX-152 |
| nos |
| | 13 |
| Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 14 |
| Ring gasket API BX-154 |
| nos |
| | 15 |
| Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 16 |
| Needle valve, 1/2”NPT 10000psi, male x female |
| nos |
| | 17 |
| Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case |
| nos |
| | 18 |
| Fabricated skid base |
| nos |
| | 19 |
| Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections. |
| nos |
| | 20 |
| Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided. |
| nos |
| | 21 |
| Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connection |
| nos |
| | 22 |
| Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. |
| nos |
| | 23 |
| Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos |
| | 24 |
| Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p. |
| nos |
| | 25 |
| Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12” |
| nos |
| | 26 |
| Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7” |
| nos |
| | 27 |
| 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded |
| nos |
| | 28 |
| 41/16″ x 10000psi Blind flanged |
| nos |
| | 29 |
| Ring gasket API BX-154 |
| nos |
| | 30 |
| Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 31 |
| Ring gasket API BX-155 |
| nos |
| | 32 |
| Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 33 |
| Ring gasket API BX-152 |
| nos |
| | 34 |
| Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos |
| | 35 |
| Lengthen flanged 31/16” x 10000psi. |
| nos |
| | 36 |
| Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case |
| nos |
| | 37 |
| Fabricated skid base |
| nos |
| | 38 |
| 50mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIAL |
| nos |
| | 39 |
| Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi） |
| nos |
| | 40 |
| 13-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line. |
| nos |
| | 41 |
| Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight. |
| nos |
| | 42 |
| Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5M |
| nos |
| | 43 |
| Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft long |
| nos |
| | 44 |
| 3″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502 |
| nos |
|
|
|
|
|
|
|
|
|
|
|
|
| | Standpipe manifold | | 1 |
| Standpipe Manifold “H” Assembly |
|
| 27,400.00 | | 2 |
| Standpipe Manifold Skid |
|
| 2,500.00 | | 3 |
| 5″ Stand Pipe Assembly |
|
| 74,000.00 |
|
|
|
|
|
| | BOP RAMS | | 1 |
| 95/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
| 25,000.00 | | 2 |
| 51/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
| 25,000.00 | | 3 |
| 27/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
| 25,000.00 | | 4 |
| 5″ pipe ram for Cameron double ram BOP 135/8″ 10000psi |
|
| 25,000.00 | | 5 |
| Blind ram for Cameron double ram BOP 135/8″ 10000psi |
|
| 25,000.00 |
|
|
|
|
|
| | CHOKE MANIFOLD | | 1 |
| Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet) |
|
| 240,990.00 | | 2 |
| Control panel for Choke manifold with stroke counter |
|
| 57,000.00 | | 3 |
| 4 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT |
|
| 344,840.00 | | 4 |
| Choke Manifold, 21/16” 5000psi, see drawing |
|
| 58,000.00 | | 5 |
| Choke & kill manifold:
Consist of equipment as following
– Mounted on oil field skid
– Pressure rating 10,000psi
– Kill and choke manifolds are anti H2S
– The bore diameter of two side in choke manifold is 4-1/16″
Including
– 0 – 15000 psi range pressure gauge (1) no
– Hydraulic actuated choke valve (1) no
– Manual operated choke valve (2) nos
– 4-1/16″ Manual gate valve (12) nos
– 4-1/16″ Hydraulic gate valve (1) no
– Remote control panel at drilling rig floor (1) no
(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.) | 1 | EA | 566,000.00 |
|
|
|
|
|
| | Kill manifold | | 1 |
| Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet) |
|
| 89,895.00 |
|
|
|
|
|
| | KOOMEY TEST PUMP & ACCESSORIES | | 1 |
| 0 – 10000psi with fill & feed pump, test pump, test pressure gauge |
|
| 77,000.00 | | 2 |
| Koomey Unit to suit the 11” BOP (type FKQ640-6) |
|
| 290,000.00 | | 3 |
| Koomey Unit to suit the 7 1/16” BOP. |
|
| 130,000.00 | | 4 |
| BOP CONTROL UNIT (KOOMY)
Production model: FK125-3 control device
The assembly consist of : remote control console, common enclosure and explosion-proof electric instrument
1. Controlled object: annulus, blind and semi-enclosed
2. Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear
3. VOLUME of oil reservoir: 440L
4. Motor power: 7.5kw
5. System working pressure: 21MPa |
| set | 125,000.00 |
|
|
|
|
|
| | CROSS OVER SUB | | 1 |
| 6-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs |
|
| 3,850.00 | | 2 |
| 4” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs |
|
| 2,700.00 | | 3 |
| 6-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection |
|
| 2,700.00 | | 4 |
| 6-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections |
|
| 2,700.00 | | 5 |
| 8” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub |
|
| 3,200.00 | | 6 |
| 4-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub |
|
| 2,700.00 | | 7 |
| Double pin sub of undernoted connection with appropriate OD x ID
a) 4” IF x 4-1/2” API Reg |
|
| 2,700.00 | | 8 |
| Double pin sub of undernoted connection with appropriate OD x ID
b) 6-5/8” R |
|
| 2,700.00 | | 9 |
| Double pin sub of undernoted connection with appropriate OD x ID
c) 6-5/8” R – 7-5/8” R |
|
| 2,700.00 |
|
|
|
|
|
| | WELL CONTROL ACCESSORIES | | 1 |
| One no. Kelly cock suitable for 41/2″ IF drill pipe connection |
|
| 12,500.00 | | 2 |
| Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections |
|
| 11,000.00 | | 3 |
| Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections |
|
| 8,500.00 | | 4 |
| 5″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connections |
|
| 7,700.00 |
|
|
|
|
|
| | Kelly cock and valve | | 1 |
| Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″ |
|
| 9,500.00 | | 2 |
| Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″ |
|
| 13,000.00 | | 3 |
| Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ |
|
| 12,000.00 | | 4 |
| Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ |
|
| 15,000.00 | | 5 |
| Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ |
|
| 12,000.00 | | 6 |
| Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ |
|
| 15,000.00 | | 7 |
| Test Pump 15000PSI with Chart Recorder |
|
| 75,000.00 | | 8 |
| Plug Valve Repair Kit;2”X5000psi |
|
| 2,280.00 | | 9 |
| Plug Valve Repair Kit;2”X10000psi |
|
| 2,580.00 | | 10 |
| Plug Valve Repair Kit;2”X15000psi |
|
| 2,860.00 | | 11 |
| Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI |
|
| 2,850.00 | | 12 |
| Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI |
|
| 2,850.00 | | 13 |
| Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSI |
|
| 3,250.00 |
|
|
|
|
|
| | BOP | | 1 |
| 71/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd18000 | | 2 |
| 71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set | usd30670 | | 3 |
| 71/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-3,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd20500 | | 4 |
| 71/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-10,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set | usd36000 | | 5 |
| 71/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd25300 | | 6 |
| 71/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set | usd42670 | | 7 |
| 11″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd24000 | | 8 |
| 11″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd33500 | | 9 |
| 11″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd32500 | | 10 |
| 11″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd49500 | | 11 |
| 11″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd173300 | | 12 |
| 11″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 280000 | | 13 |
| 135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 40000 | | 14 |
| 135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 66700 | | 15 |
| 135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 56000 | | 16 |
| 135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 94600 | | 17 |
| 135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 266700 | | 18 |
| 135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 446700 | | 19 |
| 71/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 15000 | | 20 |
| 71/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set | 24,500.00 | | 21 |
| 11″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 24000 | | 22 |
| 11″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 40000 | | 23 |
| 135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram |
| set | usd 32000 | | 24 |
| 135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram |
| set | usd 53300 | | 25 |
| 11” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set | usd 25000 | | 26 |
| 135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set | usd 27500 | | 27 |
| 7 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe rams |
| set | usd 240000 | | 28 |
| 7 1/16” 3000psi Annular BOP |
| set | usd 180000 | | 29 |
| Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each. |
| set | usd 230000 | | 30 |
| Control System for Surface Mounted BOP Stacks, FKQ840-8 |
| set | usd420000 | | 31 |
| DOUBLE RAM BOP
71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Studded 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram |
| set | usd 230000 | | 32 |
| Ram assembly
27/8” Ram sub assembly for 71/16″-5,000psi ram bop |
| set | 4,000.00 | | 33 |
| Ram assembly
31/2” Ram sub assembly for 71/16″-5,000psi ram bop |
| set | 4,000.00 | | 34 |
| ANNULAR BOP
71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20 |
| set | 95,000.00 |
|
|
|
|
|
|
|
|
|
|
|
| | ADAPTOR FLANGE | | 1 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETS |
| nos | 3,000.00 | | 2 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETS |
| nos | 3,100.00 | | 3 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS |
| nos | 3,300.00 | | 4 |
| ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS |
| nos | 3,000.00 |
|
|
|
|
|
| | Blind flange | | 1 |
| 21 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″ |
| nos | 85,000.00 | | 2 |
| 13 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″ |
| nos | 60,000.00 |
|
|
|
|
|
| | Choke lines and kill lines | | 1 |
| COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 4-1/16” 10000psi HCR valve
– two (2) 4-1/16” 10000psi manual gate valve
– two (2) 4-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205
– six (6) ring gasket, BX-155 |
| set | 69,000.00 | | 2 |
| COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 2-1/16” 10000psi HCR valve
– two (2) 2-1/16” 10000psi manual gate valve
– two (2) 2-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 3/4” x 135
– six (6) ring gasket, BX-152 |
| set | 38,000.00 | | 3 |
| Choke line: Consists of (2) valves
– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no
– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no
– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos | 1 | set | 108,000.00 | | 4 |
| Kill line: Consists of (3) valves
– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no
– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no
– Check valve (2-9/16″ x 10,000 psi) 1-no
– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos | 1 | set | 7,000.00 |
|
|
|
|
|
| | Gate valve | | 1 |
| Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. |
| nos | 12,000.00 | | 2 |
| Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated. |
| nos | 16,500.00 | | 3 |
| Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. |
| nos | 7,200.00 | | 4 |
| Gate valve, 2-1/16” 5000psi | 1 | nos | 3,800.00 | | 5 |
| Gate valve, 2-9/16” 5000psi | 1 | nos | 4,800.00 | | 6 |
| Gate valve, 3-1/8” 5000psi | 1 | nos | 6,500.00 | | 7 |
| Gate valve, 4-1/16” 5000psi | 1 | nos | 7,500.00 |
|
|
|
|
|
| | Others | | 1 |
| Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet. |
| nos | 44,000.00 | | 2 | Studded cross | Studded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. |
| nos | 9,800.00 | | 3 | Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos | 9,800.00 | | 4 | Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos | 16,500.00 | | 5 | Flanged spool | Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mm |
| nos | 8,600.00 | | 6 | Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mm |
| nos | 6,100.00 | | 7 |
| 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded |
| nos | 1,800.00 | | 8 |
| 41/16″ x 10000psi Blind flanged |
| nos | 1,600.00 | | 9 |
| DSA, 41/16″ 10000psi x 31/16″ x 10000psi |
| nos | 2,500.00 | | 10 |
| Ring gasket API BX-155 |
| nos | 70.00 | | 11 |
| Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 580.00 | | 12 |
| Ring gasket API BX-152 |
| nos | 20.00 | | 13 |
| Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 330.00 | | 14 |
| Ring gasket API BX-154 |
| nos | 40.00 | | 15 |
| Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 480.00 | | 16 |
| Needle valve, 1/2”NPT 10000psi, male x female |
| nos | 250.00 | | 17 |
| Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case |
| nos | 400.00 | | 18 |
| Fabricated skid base |
| nos | 9,000.00 | | 19 |
| Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections. |
| nos | 9,600.00 | | 20 |
| Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided. |
| nos | 9,200.00 | | 21 |
| Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connection |
| nos | 8,500.00 | | 22 |
| Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. |
| nos | 8,940.00 | | 23 |
| Studded cross 4 x 41/16″ x 10000psi w.p. |
| nos | 8,940.00 | | 24 |
| Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p. |
| nos | 8,940.00 | | 25 |
| Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12” |
| nos | 6,210.00 | | 26 |
| Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7” |
| nos | 5,100.00 | | 27 |
| 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded |
| nos | 1,800.00 | | 28 |
| 41/16″ x 10000psi Blind flanged |
| nos | 1,600.00 | | 29 |
| Ring gasket API BX-154 |
| nos | 50.00 | | 30 |
| Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 360.00 | | 31 |
| Ring gasket API BX-155 |
| nos | 70.00 | | 32 |
| Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 580.00 | | 33 |
| Ring gasket API BX-152 |
| nos | 20.00 | | 34 |
| Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts |
| nos | 330.00 | | 35 |
| Lengthen flanged 31/16” x 10000psi. |
| nos | 1,200.00 | | 36 |
| Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case |
| nos | 400.00 | | 37 |
| Fabricated skid base |
| nos | 9,000.00 | | 38 |
| 50mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIAL |
| nos | 7,500.00 | | 39 |
| Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi） |
| nos | 158,000.00 | | 40 |
| 13-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line. |
| nos | 55,800.00 | | 41 |
| Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight. |
| nos | 59,800.00 | | 42 |
| Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5M |
| nos | 18,000.00 | | 43 |
| Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft long |
| nos | 86,800.00 | | 44 |
| 3″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502 |
| nos | 15,600.00YAN CHENG SANYI WELL CONTROL EQUIPMENT AND PARTSStandpipe manifold1Standpipe Manifold “H” Assembly2Standpipe Manifold Skid35″ Stand Pipe AssemblyBOP RAMS195/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi251/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi327/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi45″ pipe ram for Cameron double ram BOP 135/8″ 10000psi5Blind ram for Cameron double ram BOP 135/8″ 10000psiCHOKE MANIFOLD1Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet)2Control panel for Choke manifold with stroke counter34 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT4Choke Manifold, 21/16” 5000psi, see drawing5Choke & kill manifold:Consist of equipment as following– Mounted on oil field skid– Pressure rating 10,000psi– Kill and choke manifolds are anti H2S– The bore diameter of two side in choke manifold is 4-1/16″Including– 0 – 15000 psi range pressure gauge (1) no– Hydraulic actuated choke valve (1) no– Manual operated choke valve (2) nos– 4-1/16″ Manual gate valve (12) nos– 4-1/16″ Hydraulic gate valve (1) no– Remote control panel at drilling rig floor (1) no(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.)1EAKill manifold1Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet)89,895.00KOOMEY TEST PUMP & ACCESSORIES10 – 10000psi with fill & feed pump, test pump, test pressure gauge2Koomey Unit to suit the 11” BOP (type FKQ640-6)3Koomey Unit to suit the 7 1/16” BOP.4BOP CONTROL UNIT (KOOMY)Production model: FK125-3 control deviceThe assembly consist of : remote control console, common enclosure and explosion-proof electric instrument1. Controlled object: annulus, blind and semi-enclosed2. Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear3. VOLUME of oil reservoir: 440L4. Motor power: 7.5kw5. System working pressure: 21MPasetCROSS OVER SUB16-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs24” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs36-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection46-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections58” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub64-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub7Double pin sub of undernoted connection with appropriate OD x IDa) 4” IF x 4-1/2” API Reg8Double pin sub of undernoted connection with appropriate OD x IDb) 6-5/8” R9Double pin sub of undernoted connection with appropriate OD x IDc) 6-5/8” R – 7-5/8” RWELL CONTROL ACCESSORIES1One no. Kelly cock suitable for 41/2″ IF drill pipe connection2Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections3Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections45″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connectionsKelly cock and valve1Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″2Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″3Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″4Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″5Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″6Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″7Test Pump 15000PSI with Chart Recorder8Plug Valve Repair Kit;2”X5000psi9Plug Valve Repair Kit;2”X10000psi10Plug Valve Repair Kit;2”X15000psi11Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI12Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI13Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSIBOP171/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset271/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset371/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-10,000psi wp BX-156– Bottom connection: Flanged 71/16″-3,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset471/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-10,000psi wp BX-156– Bottom connection: Flanged 71/16″-10,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset571/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-15,000psi wp BX-156– Bottom connection: Flanged 71/16″-15,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset671/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-15,000psi wp BX-156– Bottom connection: Flanged 71/16″-15,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset711″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset811″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset911″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-10,000psi wp BX-158– Bottom connection: Flanged 11″-10,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset1011″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-10,000psi wp BX-158– Bottom connection: Flanged 11″-10,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset1111″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-15,000psi wp BX-158– Bottom connection: Flanged 11″-15,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset1211″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-15,000psi wp BX-158– Bottom connection: Flanged 11″-15,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset13135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset14135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset15135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-10,000psi wp BX-159– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset16135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-10,000psi wp BX-159– Bottom connection: Flanged 135/8″-10,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset17135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-15,000psi wp BX-159– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset18135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-15,000psi wp BX-159– Bottom connection: Flanged 135/8″-15,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset1971/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset2071/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset2111″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset2211″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset23135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramset24135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset2511” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20set26135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20set277 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe ramsset287 1/16” 3000psi Annular BOPset29Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each.set30Control System for Surface Mounted BOP Stacks, FKQ840-8set31DOUBLE RAM BOP71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Studded 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset32Ram assembly27/8” Ram sub assembly for 71/16″-5,000psi ram bopset33Ram assembly31/2” Ram sub assembly for 71/16″-5,000psi ram bopset34ANNULAR BOP71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20setADAPTOR FLANGE1ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETSnos2ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETSnos3ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETSnos4ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETSnosBlind flange121 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″nos85,000.00213 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″nosChoke lines and kill lines1COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:– one (1) 4-1/16” 10000psi HCR valve– two (2) 4-1/16” 10000psi manual gate valve– two (2) 4-1/16” 10000psi flanged spool, 3m length– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205– six (6) ring gasket, BX-155set2COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:– one (1) 2-1/16” 10000psi HCR valve– two (2) 2-1/16” 10000psi manual gate valve– two (2) 2-1/16” 10000psi flanged spool, 3m length– forty eight (48) stud & ninety six (96) nut, 3/4” x 135– six (6) ring gasket, BX-152set3Choke line: Consists of (2) valves– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos1set4Kill line: Consists of (3) valves– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no– Check valve (2-9/16″ x 10,000 psi) 1-no– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos1setGate valve1Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated.nos12,000.002Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated.nos16,500.003Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated.nos7,200.004Gate valve, 2-1/16” 5000psi1nos3,800.005Gate valve, 2-9/16” 5000psi1nos4,800.006Gate valve, 3-1/8” 5000psi1nos7Gate valve, 4-1/16” 5000psi1nosOthers1Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet.nos2Studded crossStudded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p.nos3Studded cross 4 x 41/16″ x 10000psi w.p.nos4Studded cross 4 x 41/16″ x 10000psi w.p.nos5Flanged spoolFlanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mmnos6Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mmnos721/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threadednos841/16″ x 10000psi Blind flangednos9DSA, 41/16″ 10000psi x 31/16″ x 10000psinos10Ring gasket API BX-155nos11Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos12Ring gasket API BX-152nos13Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos14Ring gasket API BX-154nos15Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos16Needle valve, 1/2”NPT 10000psi, male x femalenos17Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Casenos18Fabricated skid basenos19Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections.nos20Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided.nos21Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connectionnos22Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p.nos23Studded cross 4 x 41/16″ x 10000psi w.p.nos24Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p.nos25Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12”nos26Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7”nos2721/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threadednos2841/16″ x 10000psi Blind flangednos29Ring gasket API BX-154nos30Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos31Ring gasket API BX-155nos32Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos33Ring gasket API BX-152nos34Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos35Lengthen flanged 31/16” x 10000psi.nos36Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Casenos37Fabricated skid basenos3850mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIALnos39Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi）nos4013-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line.nos41Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight.nos42Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5Mnos43Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft longnos443″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502nosStandpipe manifold1Standpipe Manifold “H” Assembly27,400.002Standpipe Manifold Skid2,500.0035″ Stand Pipe Assembly74,000.00BOP RAMS195/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi25,000.00251/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi25,000.00327/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi25,000.0045″ pipe ram for Cameron double ram BOP 135/8″ 10000psi25,000.005Blind ram for Cameron double ram BOP 135/8″ 10000psi25,000.00CHOKE MANIFOLD1Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet)240,990.002Control panel for Choke manifold with stroke counter57,000.0034 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT344,840.004Choke Manifold, 21/16” 5000psi, see drawing58,000.005Choke & kill manifold:Consist of equipment as following– Mounted on oil field skid– Pressure rating 10,000psi– Kill and choke manifolds are anti H2S– The bore diameter of two side in choke manifold is 4-1/16″Including– 0 – 15000 psi range pressure gauge (1) no– Hydraulic actuated choke valve (1) no– Manual operated choke valve (2) nos– 4-1/16″ Manual gate valve (12) nos– 4-1/16″ Hydraulic gate valve (1) no– Remote control panel at drilling rig floor (1) no(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.)1EA566,000.00Kill manifold1Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet)89,895.00KOOMEY TEST PUMP & ACCESSORIES10 – 10000psi with fill & feed pump, test pump, test pressure gauge77,000.002Koomey Unit to suit the 11” BOP (type FKQ640-6)290,000.003Koomey Unit to suit the 7 1/16” BOP.130,000.004BOP CONTROL UNIT (KOOMY)Production model: FK125-3 control deviceThe assembly consist of : remote control console, common enclosure and explosion-proof electric instrument1. Controlled object: annulus, blind and semi-enclosed2. Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear3. VOLUME of oil reservoir: 440L4. Motor power: 7.5kw5. System working pressure: 21MPaset125,000.00CROSS OVER SUB16-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs3,850.0024” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs2,700.0036-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection2,700.0046-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections2,700.0058” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub3,200.0064-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub2,700.007Double pin sub of undernoted connection with appropriate OD x IDa) 4” IF x 4-1/2” API Reg2,700.008Double pin sub of undernoted connection with appropriate OD x IDb) 6-5/8” R2,700.009Double pin sub of undernoted connection with appropriate OD x IDc) 6-5/8” R – 7-5/8” R2,700.00WELL CONTROL ACCESSORIES1One no. Kelly cock suitable for 41/2″ IF drill pipe connection12,500.002Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections11,000.003Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections8,500.0045″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connections7,700.00Kelly cock and valve1Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″9,500.002Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″13,000.003Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″12,000.004Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″15,000.005Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″12,000.006Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″15,000.007Test Pump 15000PSI with Chart Recorder75,000.008Plug Valve Repair Kit;2”X5000psi2,280.009Plug Valve Repair Kit;2”X10000psi2,580.0010Plug Valve Repair Kit;2”X15000psi2,860.0011Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI2,850.0012Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI2,850.0013Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSI3,250.00BOP171/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd18000271/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramsetusd30670371/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-10,000psi wp BX-156– Bottom connection: Flanged 71/16″-3,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd20500471/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-10,000psi wp BX-156– Bottom connection: Flanged 71/16″-10,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramsetusd36000571/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-15,000psi wp BX-156– Bottom connection: Flanged 71/16″-15,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd25300671/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-15,000psi wp BX-156– Bottom connection: Flanged 71/16″-15,000psi wp BX-156– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramsetusd42670711″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd24000811″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd33500911″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-10,000psi wp BX-158– Bottom connection: Flanged 11″-10,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd325001011″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-10,000psi wp BX-158– Bottom connection: Flanged 11″-10,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd495001111″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-15,000psi wp BX-158– Bottom connection: Flanged 11″-15,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd1733001211″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-15,000psi wp BX-158– Bottom connection: Flanged 11″-15,000psi wp BX-158– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd 28000013135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 4000014135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramset usd 6670015135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-10,000psi wp BX-159– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 5600016135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-10,000psi wp BX-159– Bottom connection: Flanged 135/8″-10,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd 9460017135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-15,000psi wp BX-159– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 26670018135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-15,000psi wp BX-159– Bottom connection: Flanged 135/8″-15,000psi wp BX-159– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd 4467001971/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 150002071/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramset24,500.002111″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 240002211″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 11″-5,000psi wp R-54– Bottom connection: Flanged 11″-5,000psi wp R-54– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd 4000023135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ramsetusd 3200024135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Flanged 135/8″-5,000psi wp BX-160– Bottom connection: Flanged 135/8″-5,000psi wp BX-160– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ramsetusd 533002511” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20setusd 2500026135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20setusd 27500277 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe ramssetusd 240000287 1/16” 3000psi Annular BOPsetusd 18000029Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each.setusd 23000030Control System for Surface Mounted BOP Stacks, FKQ840-8setusd42000031DOUBLE RAM BOP71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.– Top connection: Studded 71/16″-5,000psi wp R-46– Bottom connection: Flanged 71/16″-5,000psi wp R-46– Stainless Steel Lay: Top and Bottom connections and all side outlets.– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp– Temperature Class:T-20– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ramsetusd 23000032Ram assembly27/8” Ram sub assembly for 71/16″-5,000psi ram bopset4,000.0033Ram assembly31/2” Ram sub assembly for 71/16″-5,000psi ram bopset4,000.0034ANNULAR BOP71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20set95,000.00ADAPTOR FLANGE1ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETSnos3,000.002ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETSnos3,100.003ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETSnos3,300.004ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETSnos3,000.00Blind flange121 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″nos85,000.00213 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″nos60,000.00Choke lines and kill lines1COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:– one (1) 4-1/16” 10000psi HCR valve– two (2) 4-1/16” 10000psi manual gate valve– two (2) 4-1/16” 10000psi flanged spool, 3m length– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205– six (6) ring gasket, BX-155set69,000.002COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:– one (1) 2-1/16” 10000psi HCR valve– two (2) 2-1/16” 10000psi manual gate valve– two (2) 2-1/16” 10000psi flanged spool, 3m length– forty eight (48) stud & ninety six (96) nut, 3/4” x 135– six (6) ring gasket, BX-152set38,000.003Choke line: Consists of (2) valves– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos1set108,000.004Kill line: Consists of (3) valves– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no– Check valve (2-9/16″ x 10,000 psi) 1-no– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos1set7,000.00Gate valve1Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated.nos12,000.002Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated.nos16,500.003Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated.nos7,200.004Gate valve, 2-1/16” 5000psi1nos3,800.005Gate valve, 2-9/16” 5000psi1nos4,800.006Gate valve, 3-1/8” 5000psi1nos6,500.007Gate valve, 4-1/16” 5000psi1nos7,500.00Others1Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet.nos44,000.002Studded crossStudded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p.nos9,800.003Studded cross 4 x 41/16″ x 10000psi w.p.nos9,800.004Studded cross 4 x 41/16″ x 10000psi w.p.nos16,500.005Flanged spoolFlanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mmnos8,600.006Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mmnos6,100.00721/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threadednos1,800.00841/16″ x 10000psi Blind flangednos1,600.009DSA, 41/16″ 10000psi x 31/16″ x 10000psinos2,500.0010Ring gasket API BX-155nos70.0011Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos580.0012Ring gasket API BX-152nos20.0013Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos330.0014Ring gasket API BX-154nos40.0015Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos480.0016Needle valve, 1/2”NPT 10000psi, male x femalenos250.0017Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Casenos400.0018Fabricated skid basenos9,000.0019Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections.nos9,600.0020Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided.nos9,200.0021Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connectionnos8,500.0022Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p.nos8,940.0023Studded cross 4 x 41/16″ x 10000psi w.p.nos8,940.0024Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p.nos8,940.0025Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12”nos6,210.0026Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7”nos5,100.002721/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threadednos1,800.002841/16″ x 10000psi Blind flangednos1,600.0029Ring gasket API BX-154nos50.0030Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos360.0031Ring gasket API BX-155nos70.0032Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos580.0033Ring gasket API BX-152nos20.0034Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nutsnos330.0035Lengthen flanged 31/16” x 10000psi.nos1,200.0036Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Casenos400.0037Fabricated skid basenos9,000.003850mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIALnos7,500.0039Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi）nos158,000.004013-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line.nos55,800.0041Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight.nos59,800.0042Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5Mnos18,000.0043Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft longnos86,800.00443″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502nos15,600.00 |
|
|
Telephone
E-MAIL