| Drillmec HTD250 |
| Name | Cat. № | pcs | Note |
| Spring | 40630270 | 6 |
|
| Cardan | 40590080 | 2 |
|
| Pump control controller P14 |
| 6 | S23-1266 RI5077HD00-187 |
| Body (ball valve opening mechanism) | 19813995 | 4 |
|
| Lever | 19015857 | 4 |
|
| Idle roll pin | 62030057 | 4 |
|
| Name | Cat. № | pcs | Note |
| Drillmec ETD 250 |
| Hydraulic cylinder repair kit | RI55070308-01 | 5 |
|
| Nipple for lubricating the stuffing box assembly | 61000006 | 5 |
|
| Washer | 70902512 | 8 |
|
| STROP hydraulic cylinder repair kit | RI55070413-01 | 5 |
|
| Body screw mechanism – all-welded ball valve | 71020297 | 10 |
|
| Hydraulic actuator rocker – all-welded ball valve (assembled) | 19813995 | 2 |
|
| Gasket kit | RI55050327-01 | 4 |
|
| Flow regulator (needle valve )heat exchanger | 50852333 | 2 |
|
| Pressure reducing valve weight compensator | 50853113 | 2 |
|
| Pressure reducing valve | 50853107 | 2 | check valve 3/4”BSP 6BAR AISI316 |
| Check valve 6 Bar cooling system | 50853107 | 2 | 6 Bar система охлаждения |
| Pressure-reducing valve (heat exchanger) | 50853115 | 2 | reducing pressure (7/350Bar) Cetop ( rexroth Reducing Press Valve) |
| Flow regulator (heat exchanger) | 50853156 | 2 | Flow regulator (compensated) 3/8″BSP |
| Check valve (heat exchanger) | 50852262 | 2 | check valve 3/4”BSP 0,35 Bar AISI316 |
| Valve (lubrication system) | 50851596 | 2 | check valve 3/8”BSP 0,35 Bar AISI316 |
| Exhaust valve | 50853116 | 2 | Relief Valve 1/2″ BSP |
| Solenoid valve monoblock | 50853159 | 1 | Auxiliaries Service Block |
| Flow regulator | 50853156 | 2 | 3/8 BPS |
| Solenoid valve (rotary manipulator) | 50853109 – 1 | 2 |
|
| Compensator valve | 50853111 – 1 | 2 |
|
| Contamination indicator | 50981228 | 2 |
|
| Solenoid valve heat exchanger | 50695389 | 2 |
|
| Support block | 1945441 | 2 |
|
| Dryer, analog of Canrig 6027 | 19014296 | 50 |
|
| Gripper | 19015840 | 2 |
|
| Cylinder | 55070413 | 2 | Strop cylinder ETD-250 70×40 stroke 460 |
| Guide | 19015753 | 8 | Tube clamp spring cup ETD-250, HTD-250 |
| Spring | 40630235 | 8 | Pipe clamp alignment spring |
| Support block | 1945439 | 5 |
|
| Support block | 1945441 | 5 |
|
| Replaceable guide bar | 1945486 | 50 |
|
| Gasket kit | RI55050327-01 | 2 | Hydraulic cylinder of the ball valve actuator |
| Flow regulator | 50852333 | 2 |
|
| Pressure reducing valve | 50853113 | 2 |
|
| Pressure reducing valve | 50853115 | 2 |
|
| Flow regulator | 50853156 | 2 | ETD-250 heat exchanger flow controller |
| Check valve | 50852262 | 2 | 3/4″ |
| Valve | 50851596 | 2 |
|
| pressure sensor | 47108872 | 2 |
|
| Exhaust valve | 50853116 | 2 |
|
| Valve | 50850782 | 2 | REXROTH 1/4″ SHUTTLE VALVE P-054350-00002 |
| pressure transmitter | 47108850 | 2 |
|
| pressure transmitter | 47108851 | 2 |
|
| Solenoid valve monoblock | 50853159 | 2 |
|
| Flow regulator | 50853156 | 2 | rexroth Reducing Press Valve 3/8 BSP AISI316 |
Telephone
E-MAIL