Honghua HHF 800 Mud pump crankshaft parts list
| 2、NB800M.02.00 Crankshaft assembly |
|
|
| S.N | Drawing no. | Item | Qty |
| 1 | NB800M.02.01.00 | Cover, main bearing | 2 |
| 2 | NB800M.02.01A.00 | Cover, main bearing | 1 |
| 3 | NB800M.02.02 | Sleeve, main bearing (right) | 1 |
| 4 | NB800M.02.03 | Seal gasket | 2 |
| 5 | NB800M.02.04 | Insider retainer | 2 |
| 6 | NB800M.02.05.00 | Outside retainer | 3 |
| 7 | NB800M.02.06 | rod | 3 |
| 8 | NB800M.02.07 | Locating ring (I) | 1 |
| 9 | NB800M.02.08.00 | Crankshaft | 1 |
| 10 | NB800M.02.09 | Locating ring (II) | 1 |
| 11 | NB800M.02.10.00 | Bull gear | 1 |
| 12 | NB800M.02.10A | Bull gear (hobbing ) | 1 |
| 13 | NB800M.02.10B | Bull gear (gear grinding) | 1 |
| 14 | NB800M.02.11 | bolt: 1 1/8-8UN-2Ax125 | 12 |
| 15 | NB800M.02.11A | bolt: 1 1/8-8UN-2Ax100 | 12 |
| 16 | NB800M.02.12.00 | Locking nut: 1 1/8-8UN-2B | 12 |
| 17 | NB800M.02.13 | spacer ring | 2 |
| 18 | NB800M.02.14 | Bolt, main bearing: 2 1/4-8UN-3A | 4 |
| 19 | NB800M.02.15.00 | Shim set | 4 |
| 20 | NB800M.02.16 | Sleeve, main bearing (left) | 1 |
| 21 | NB800M.02.17 | retainer ring | 2 |
| 22 | NB800M.02.18 | Baffle plate | 2 |
| 23 | NB800M.02.19 | Bolt: 5/8-11×1 1/2 | 72 |
| 24 | ANSI/ASMEB 18.2.1-1996 | Bolt: 5/8-11×1 3/4 | 28 |
| 25 | GB/T97.2-1985 | Washer: 16 | 28 |
| 26 | GB/T343-1994 | Locking wire: SZ-1.50 | 1 |
| 27 | NB800M.02.20 | Bolt: 5/8-11×4 3/4 | 2 |
| 28 | NB800M.02.21 | Bolt: 5/8-11×4 | 2 |
| 29 | GB/T343-1994 | Locking wire: SZ-3.00 | 1 |
| 30 | NB800M.02.22 | Eccentric bearing: NUP 464775 Q4/C9YA4 | 3 |
| 31 | NB800M.02.23 | Main bearing: 23148/C3W33 | 2 |
| 32 | 242 | anaerobic adhesive for thread locking and sealing | 1 |
Telephone
E-MAIL