| 107.11.10.09 (δ2) Gasket |
| 107.11.110.43 Wear plate |
| 107.130.02 Diphragm stabIizer |
| 107.04.30.06-1 Magnetic block |
| 107.11.110.20 Nipple |
| 107.11.99.00 (M16) Bolt |
| 107.11.110.41-1 Stud |
| GB6170-86 (M12) Nut |
| 107.04.110.44 (M33x2-2a) Nut |
| 107.11.20.13 (δ0.2) Gasket |
| 107.11.20.14 (δ0.1) Gasket |
| 107.04.90.07 (δ6) Windows cover |
| 107.11.110.60 Seal |
| 107.130.01-1 Casing |
| 107.11.110.34 (V) Liner |
| 107.11.96.03 Packing boxes |
| 107.11.20.00 Crank shaft assy |
| GB32.1-88 (M16×30) Screw |
| 107.130.01.00-1 Diaphragm |
| 107.11.70.00 Water retainer |
| GB5783-86 (M20x50) Bolt |
| 107.04.30.05 Gasket |
| 107.11.20.09 Outer race retainer |
| 107.11.110.15 Discharge manifold |
| 107.11.110.17 Stud |
| 107.11.30.04 (Φ10×1 L=30) Socket |
| 107.11.96.01 (δ5) Gasket |
| 154942Q (Φ209×Φ282×236) Bearing |
| 107.11.600.00-1 Frame assemble |
| 107.11.90.26 (Φ40×Φ26) Gasket |
| 107.11.101.00 Spray pump system |
| 107.11.110.54 Support |
| 107.11.12.00 Oil box |
| 107.11.110.05 Seal valve cover |
| GB5873-86 (M16x30) Bolt |
| 107.11.20.19 (δ0.1) Gasket |
| 107.11.20.34 Crosshead, center & right |
| 107.04.30.04 plug |
| 107.11.10.13 (50.8×38.1×385) Key |
| 107.11.20.10 Inner race retainer |
| 107.11.90.32 (δ8) Gasket |
| 107.11.110.25 (20) Liner |
| 107.130.07 (Φ19 δ4) washer |
| 107.11.20.20 Connecting rod |
| 107.130.03.00 Cut-off valve |
| 107.164.02 Flange |
| 107.11.110.26 (20) Liner |
| 107.11.90.09-1 Gasket |
| 107.10.110.03 Seal |
| 107.11.110.22 (20) Liner |
| 107.11.110.19 Liner end cover |
| 229/723QU (Φ723.795xΦ908.65×120.65) Eccentric bearing |
| 107.164.05 (2″) Elbow |
| 107.11.10.02 Bush |
| D3-4-67 (62×75 δ4) Rubber washer |
| 107.11.110.12-1 (M39x3) Stud |
| 107.11.10.10 (δ1) Gasket |
| 107.11.110.16 Spring |
| GB93-87 (10) Washer |
| 107.11.01.01 M30 Bolt |
| 107.11.95.00 Dipstick oil lever |
| 107.11.21.00 Crank shaft |
| GB6170-86 (M20) Nut |
| C3-9-92 (M36x3) Nut |
| GB5783-87 (M20x55) Bolt |
| 107.11.96.04 Ring |
Telephone
E-MAIL