| 748-08-2-24 MAST RAISING INF, TRUNN, 18.00 X 6.38 |
| LN-1000NC-GR8 LOCKNUT, 1-8UNC, GR8, STOVER |
| AY11384-1B-1 FLEX DC. SH, 80 FT., TD-HW, HAST*4W |
| F451JSJS080808-30.8-X-28 HOSE ASSY, 1/2, SWV STR, SWV STR, 30.8 |
| AVIiaBMIS PlfX, AC, 81 FT., TD-HK, IWST-H |
| E10991 BUSHING, INSULATING CABLE, 2.5 IN |
| BACK UP WRENCH CONTROL SCHEMATIC EL11060-39 |
| AY12390 ASSY.COMPACT CIP BACKPAN, GENERIC |
| E10924 POWER SUPPLY, 24VDC, 10A |
| MOTOR ASSY, DC, SH, 1130 HP AY10007 |
| R01-1001-010 HOLDING RING |
| E16-2021-010 FERRULE, #16 AWG, 7mm, UNINSULATED |
| SH-0750NC-0200-W CAPSCR, HEX SOC HD, 3/4-10UNC x 2.00 |
| AYIIW-t-1 UX DC, SH/SR, 74 FT.. TD-HW; HAST-M |
| HN-0437NF-GR8 HEX NUT, 7/16-20UNF, GR8 |
| DT12644 J-BOX, CIP ENCLOSURE CUT-OUT |
| E03-2000-010 CABLE TIE, 13.4 IN LG, 120 LB |
| E06-1000-010 SWITCH, SEL, 2 POS, MAINT, ILLUM, NO KNOB |
| E06-6010-010 SWITCH, PB, MOMENT, RED, 2-NO 2-NC |
| HH-0250NC-0225-GR8-W CAPSCR, HEX HD, 1/4-20UNC x 2.25, GR8, W |
| E10575 MARKING TAGS, TERMINAL, 1-10, 6.2MM |
| E16-1102-010 END BRACKET, TS 35 RAIL |
| AY10080 RUNNER FRAME, ROPE GUIDE ASSY |
| LW-0500-HS LOCKWASHER, 1/2, HELICAL SPRING |
| CBL10116 KIT CABLE, TDSU TO TG, 500T, DC |
| E10271 CABLE GRIP, OFFSET EYE, 0.35 – 0.44 |
| M10069 PLAIN BEARING |
| N04-1014-500 METER, LED DIGITAL, 0-10 VDC IN, 0-500 |
| SH-0750NC-0225-W CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 |
| E36-3008-010 INSERT, SIZE 16S, 7 PIN, 16 AWG |
| H15-1029-010 QUICK PRESS NUT CPLER, FEM 3/4 NPT |
| 10071-15 HARPOON ASSY, 1M^0 LO, C/W LATCHES ANO RELEASE CAM |
| E11603 XFMR, 25 KVA, 600-120/240, 1 PH |
| H09-1004-010 COUNTERBALANCE VALVE |
| H15-520118-08 LOCKNUT, BULKHEAD 1/2,13/16-16UNF |
| AY11701 KIT, O-RING, TOP DRIVE |
| H15-140140-32-24 BUSH, HEX, MALE 2 NPT, FEM 1 1/2 NPT |
| 748-22-0-4 CANRIG top drive spare part |
| 741-12-7 RETAINER, VIEWCOVER, GEARCASE, 26 x 6 |
| DT14883 PIPE SUPPORT, INTERMEDIATE, SSF |
| E36-3101-010 RECEPTACLE SHELL, SIZE 16S, W/O INSERT |
| H15-520118-08 LOCKNUT, BULKHEAD 1/2, 13/16-16UNF |
| E06-1009-010 SWITCH, SEL, 3 PoS, MAINT, 1-No 1-NC |
| 685-12-0 SEAL RING |
| AY11383-32 SERVICE LOOP, EL, DUAL, DC, FLEX, 80 FT |
| DT16240 PIVOT PIN BOLT, LINK TILT |
| P10-3002-010 HOSE CLAMP, 1/4in |
| AY10086-5 CANRIG top drive spare part |
| E10953 TERMINAL, FUSED, 24V INDICATOR, COMBI-FOOOT |
| R01-1003-01A GREASE NIPPLE |
Telephone
E-MAIL