| E34909 “LATCH SPRING 2” |
| T11199 DOWELL PIN |
| 14-630-180 “CMS-3” TAPER CASING SLIPS |
| T24249 “TONG LINE RETAINER BOLT” |
| 34-230 3 1/2” X 1 1/4” (1.660”) INSERTS (SET OF 4) |
| E55501 “SHOULDER SCREW 8” |
| T939484-8 BALANCING SCREW BOLT NUT |
| HINGE PIN f/DCSL 2525 |
| HINGE PIN f/DCSR 2520 |
| HINGE PIN w/ COTTER 7638-B-59 |
| T11511 LONG JAW F/TYPE C TONG |
| T30728-1 2 3/8 — 3,668 LUG JAW ASSEMBLY |
| E29337 LINK BLOCK |
| T939099-596 BALANCING SCREW BOLT |
| END LINK (PIVOT BLOCK) 7624-A-19 |
| E23544 “LATCHPIN *” |
| INTERMEDIATE SEGMENT f/CMS-3” BRIEFS N/A N/A |
| T11194-1 LONG JAW ASSY. F/TYPE B TONG |
| BODY SEGMENT (RIGHT HAND) 7638-5101-11 |
| E29343-6 2 7/8” X 1 1/4” (1.660”) MYT SLIP ASSEMBLY |
| HINGE PIN w/ COTTER 7638-B-59 |
| LEFT HAND SEGMENT f/DCSR 2569 |
| K-25 CENTER JAW 8527-5033 |
| COTTER f/LINK PIN 900620-36 |
| T50214-C SLOT |
| E55516 3 1/2” HYC SETTING RING |
| DCS R 2628 BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS |
| E29343-10-S 2 7/8” MYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) |
| E939484-7 LINK BLOCK NUT |
| E30227 6 5/8” INSERT RETAINERS |
| 23-174 BASIC |
| 4 1/2” O.D. SDXL 15562 “SD” TYPE ROTARY SLIPS LESS INSERTS |
| TONG ROLLOVER HANGER ASSY 8527-5045 |
| E939672-18 COTTER PIN |
| E939352-64 GUIDE PLATE LOCKWASHER |
| 34-632 HYDRAULIC CYLINDER ASSY. |
| 16 1/2″ – 18″ 7624-5104 |
| DRIVE PIN, HPD LOCK 2 32-697 |
| E34910 HINGE PIN RETAINER |
| E39-054 14” – 20” LATCH |
| INSERT RETAINER RING 5” 3741 |
| E55518 4 1/2” HYC SETTING RING |
| 10 1/2″ – 11 5/8″ 7624-5103 |
| E26813 HINGE PIN |
| E11764 LATCH LOCK |
| 5 1/2” X 5 1/2” 7613-H-81 INSERTS FOR 5 1/2” “DU” ROTARY TYPE SLIPS AND 5 1/2” “TS-100” SLIPS |
| E23569 “HINGE PIN *” |
| E8145-2 LINK BLOCK BOLT & NUT |
| E39-210 4″ – 5 3/4″ |
| E50713 LATCH PIN (FRAME 32386 & 32383) |
Telephone
E-MAIL