| 4 1/2” REDUCER 2166 |
| E29343-7 2 7/8” X 1” (1.315”) MYT SLIP ASSEMBLY |
| E13190 DOOR LUG PIN |
| E11763 LATCH |
| T16402-2 1/2 X 1 1/4 X 5 7/8 TONG DIE |
| E30220 5” SETTING PLATE |
| E947128-120 LATCH PIN RETAINER |
| E13188 “LATCH LOCK SPRING 2” |
| T11516-2 STANDARD LEVER ASSY. F/TYPE C TONG |
| T200074-1 SHORT JAW ASSY. F/TYPE HT-100 TONG |
| T11229 BOOSTER PLUNGER SPRING |
| E12734 SCOOTER |
| E52539-1 “SLIP SPRING 8” |
| E30460 LATCH |
| T16401-2 1/2 X 1 1/4 X 5 TONG DIE |
| DCS L 2627 BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS |
| “CPS” CONDUCTOR PIPE SLIPS 14-631-156 |
| INTERMEDIATE SEGMENT f/DCSL 2556 |
| T51402-16 COTTER PIN |
| 14-631-252 “CMS-3” TAPER CASING SLIPS |
| E32918 HINGE PIN RETAINER (9 5/8” – 10 3/4”) |
| 11” – 12 3/4” DCS-L 2534 “DCS” DRILL COLLAR SLIPS COMPLETE |
| BODY SEGMENT (RIGHT HAND) 7638-5099-11 |
| E29336 SLIP BOLT |
| BODY SEGMENT (RIGHT HAND) 7638-5102-11 |
| 5 1/2” X 4 1/2” 7613-E-81 INSERTS FOR 5 1/2” “DU” ROTARY TYPE SLIPS AND 5 1/2” “TS-100” SLIPS |
| T9572 LEVER HINGE PIN BLOCK |
| 3-1/2” X 3-1/2” 7502-A-5069 |
| 3/8” x 2 1/4” HEX CAP SCREW 900020-63 |
| E16407 7” X 7” INSERT |
| 34-615 “SET SCREW (FOR LIFTING ARM)” |
| T200072-1 LONG JAW ASSY. F/TYPE HT-100 TONG |
| LEFT HAND SEGMENT f/DCSS 3765 |
| RIGHT-HAND SEGMENT 7502-C-217 |
| E39-042 11 3/4” – 13 3/8” |
| 14-630-180 “CMSXL” CASING BRIEFS COMPLETE |
| 4” – 4 7/8” DCS-S 2573 “DCS” DRILL COLLAR SLIPS COMPLETE |
| 5 1/2” – 7” 7638-5106 “C-1” DRILL COLLAR SLIPS COMPLETE |
| E939484-8 LATCH LOCK BOLT NUT |
| E31584 SCOOTER PIN |
| 23-169 REDUCERS |
| T200661-1 LEVER ASSY. F/TYPE HT-100 TONG |
| E29257 2 7/8” X 1 1/2” (1.900”) INSERT |
| T30329 HANGER BOLT ASSY. |
| T200669 NAMEPLATE |
| BODY SEGMENT (RIGHT HAND) 7638-5102-11 |
| 4 1/2” x 3 1/2” SDXL 15515 “SD” TYPE ROTARY SLIPS WITH INSERTS |
| E939484-5 “GUIDE PLATE NUT 8” |
| E29258 2 7/8” X 1 1/4” (1.660”) INSERT |
| RIGHT HAND SEGMENT f/DCSR 2568 |
Telephone
E-MAIL