| E8150 “LINK BLOCK NUT 2” |
| TONG HEAD PIN 8527-5053 3 |
| E30221 5” INSERT RETAINERS |
| T13264-1-SH SET BACK HANGER ASSY. F/TYPE C TONG |
| E9519 LINK BLOCK |
| 23-171 REDUCERS |
| E24507 INSERT SPACER (3 1/2”) |
| “CPS” CONDUCTOR PIPE SLIPS 14-631-168 |
| T26783-SH SET BACK HANGER ONLY F/TYPE B TONG |
| E31074 HINGE PIN RETAINER |
| T12863 SUSPENSION RING |
| E55513 5 1/2” X 5 1/2” HYC SLIP ASSY. |
| INSERT 707-000-0500 |
| E12734 SCOOTER |
| SPRING f/INSERT 7624-B-21 |
| E8150 “LINK BLOCK NUT 2” |
| T200664 8 1/2 — 12 LUG JAW ASSEMBLY |
| T9568-1 SHORT LEVER ASSY. F/TYPE B TONG |
| E23115 SLIP BOLT |
| DCS L 2630 BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS |
| 3 1/2” REDUCER 2163 |
| HANDLE KIT 7624-A-5138 |
| E39161 “LATCH LOCK 1” |
| E24773 2 7/8” X 2 7/8” |
| 14-630-216 “CMS-3” TAPER CASING SLIPS |
| E941286-73 INSERT RET. SCREW |
| E939672-19 COTTER PIN |
| 14-631-360 “CMSXL” CASING SLIPS COMPLETE |
| E32919 HINGE PIN (FRAME 32384) |
| T11940-2 5 1/4 — 7 LUG JAW ASSEMBLY |
| 5” REDUCER 2169 |
| E39214-3 3 1/2” HYT SETTING RING |
| T13799 9 5/8 — 10 3/4 LUG JAW |
| LESS LINERS 12/7704-A-35 “UC-3” CASING BRIEFS |
| 12 1/2″ – 13 5/8″ 7624-5105 |
| T939248-8 HANGER JAM NUT |
| T51402-16 COTTER PIN |
| E940308-1 GREASE FITTING |
| LATCH PIN W/ COTTER 7502-B-207 |
| E32892 LATCH PIN RETAINER |
| NUT WRENCH 7624-A-25 |
| T200548 11 3/4 — 14 3/8 LUG JAW ASSEMBLY |
| E8151 UPPER LINK BLOCK BOLT, NUT, & COT, |
| E32892 HINGE PIN RETAINER (FRAME 32385, 32386 & 32383) |
| 4” REDUCER 2164 |
| T50912-C LOCKWASHER |
| E70011 7 5/8” INSERT RETAINERS |
| E31331 LATCH (5 3/4” – 14 1/4”) |
| LEFT HAND SEGMENT f/DCSL 2555 |
| HANDLE PIN w/ COTTER 7638-E-2 |
Telephone
E-MAIL