| 12 3/4” O.D. 10/7704-A-35 “UC-3” CASING SLIPS |
| T2005682 NAMEPLATE |
| HANDLE PIN 707-000-3000 |
| 34-604 SHAFT (LEFT HAND CRANK) |
| RENEWABLE LINER 7638-116 |
| 5” O.D. SDML 15569-1 “SD” TYPE ROTARY SLIPS LESS INSERTS |
| INSERT w/COTTER 7624-A-4 |
| LEFT HANDLE 3768 |
| E939098-65 “GUIDE PLATE SCREW 4” |
| T50512-C BALANCING SCREW BOLT NUT |
| E39162 LATCH |
| END LINK PIN w/CHAIN 7624-F-5 |
| SPRING LOCK FOR ALL PINS 904685-71 |
| E55519 5” HYC SETTING RING |
| TONG HEAD PIN |
| 21-109-D 2 7/8” X 3/4” (1.050”) INSERT F/DUAL SLIP |
| 21-109-DSET 2 7/8” X 3/4” (1.050” SET) INSERTS F/DUAL SLIP |
| K-30 TONG HANDLE 8527-5047 |
| T939168-133 HANGER ADJUSTMENT SCREW |
| E939098-75 GUIDE PLATE SCREW |
| T200668-SH SET BACK HANGER ONLY F/ HT-100 & HT-65 TONG |
| 18 1/2” – 20” 7624-5105 |
| E23113 SLIP SPRING |
| E939098-36 “HEX HEAD CAPSCREW 4” |
| E55504 HINGE PIN RETAINER |
| BODY SEGMENT (LEFT HAND) 7638-5102-12 |
| 23-155 BASIC |
| T200666 15 3/4 LUG JAW ASSEMBLY |
| E30652 LATCH |
| BODY SEGMENT (INTERMEDIATE) 7638-5101-10 |
| E940308-1 GREASE FITTING |
| 21-107-D 2 7/8” X 1 1/4” (1.660”) INSERT F/DUAL SLIP |
| E30214 INSERT RET. RING 3 1/2″ – 4 1/2″ |
| HINGE PIN 707-000-0100 |
| PIVOT BLOCK 7624-A-5000 |
| E26814 LATCHPIN |
| 14-631-444 “CMS-3” TAPER CASING SLIPS |
| E29338 LATCH SPRING |
| INSERT RETAINER SCREW & NUT ALL 3737 |
| E11581 LATCH CAM |
| 8 1/2” – 10” 7638-5108 “C-1”DRILL COLLAR SLIPS COMPLETE |
| RETAINING RING 2 32-017 |
| T24526 LATCH SPRING PLUNGER |
| 34-209 4 1/2” X 4 1/2” INSERTS (SET OF 4) |
| E13188 “LATCH LOCK SPRING 2” |
| HANDLE PIN w/ WASHER & COTTER 3769 |
| E27507 SETTING RING RETAINER (2 7/8”) |
| 34-129 AIR CONTROL VALVE ASSY. FOOT OPERATED W/QUICK CHANGE COUPLING |
| 34-205 3 1/2” X 3 1/2” INSERTS (SET OF 4) |
| 11 1/2″ – 12 5/8″ 7624-5104 |
Telephone
E-MAIL