|
OUTBOARD LABYRINTH SEAL FOR CENTRIFUGAL PUMPS G0006158 Drilling Spare Parts
| Control cable ZR YCKEPH-450/750V 22×1.5+14x2x1.5, 71m. 3.03.01.03.032 | | Central processor 6AG1 315-2AH14-7ABO | | Discrete input module SIPLUS SM 321 Siemens 6AG1 321-11BL00-2AA0 | | Output module SIPLUS SM 322 Siemens 6AG1 322-11BL00-2AA0 | | Output module SIPLUS SM 332 Siemens 6AG1 332-5HD01-7AB0 | | Analog input module SIPLUS SM 331 6AG1 331-7KF02-2AB0 | | Interface module SIPLUS SM 153 Siemens 6AG1 153-1AA03-2XB0 | | ACS880-04-650A-7 module 3AUA0000187098-M | | Profibus communication module FPBA-01 3AFE68469325 | | Memory module ZMU-02 3AXD50000006010 | | HTL pulse encoder module FEN-31 3AFE68978955 | | Control panel ACS-AP-W 3AXD50000025964 | | JIANGSU RUTONG PETRO INSERT BOWL 6608 | | IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 8× 6× 12 | | CASING WEAR PLATE , 4 × 3 × 13 INCH-P/N:G0006074, BRAND : | | CASING WEAR PLATE , 6 × 5 × 14 INCH-P/N:G0006050, BRAND : | | IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 4 × 3 × 8.5 , P/N: G0006185 | | IMPELLER FOR CENTRIFUGAL PUMP, SIZE : 4 × 3 × 10 , P/N: G0006188 | | IMPELLER (11 INCH), 6 × 5 × 11 INCH – P/N: G20006168 | | OUTBOARD LABYRINTH SEAL FOR CENTRIFUGAL PUMPS –P/N:G0006158 | | INBOARD LABYRINTH SEAL FOR CENTRIFUGAL PUMPS –P/N:G0006159 | | IMPELLER(10.50 INCH), 8 × 6× 10.50 INCH-P/N:G0006217 | | IMPELLER(13 INCH),8 × 6 × 13 INCH | | IMPELLER(11.50 IONCH), 8 × 6 × 11.5 INCH-P/N:G0006219 | | PARTS FOR “BOMCO” DRAWWORKS, TYPE JC-70D SANDREEL DRUM ASSY., DRWG. NO. AF50001-01.02.00A SWIVEL JOINT XL-L15 | | ENGINEOIL LUBRICATING SYSTEM, DRWG. AF50001-06.00 OIL FILTER, SUCTION NJU-250X180F | | TORQUE FORCE ROD, JC030704 | | SPRING PLATE , JC030703 | | BRAKE BLOCK, CPTDC P/N: JC030806 | | TORQUE FORCE ROD , JC030804 | | RING, DUSTPROOF, UNREINFORCED, d70(Q/ZB336-77), SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-2 | | RING, SUPPORT, CKS0700, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-9 | | SPRING, DISK, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-14 | | RING, DUSTPROOF, UNREINFORCED, d70(Q/ZB336-77), SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-2 | | SPRING, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-9 | | RING, GUIDE, 10X2.5X430, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-15 | | RING, SUPPORT, CKW1500, SERVICE CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: KG80-16 | | NUT, HEX, M24, FOR DEADLINE STABILIZER, MODEL: JZG41, MAKE: HH, P/N: GB /T 6170-2000 | | WASHER, SPRING, 24, FOR DEADLINE STABILIZER, MODEL: JZG41, MAKE: HH, P/N: GB /T 93-1987 | | RING, GUIDE, SIZE: 10 X 2.5 X 226.5, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: KD22-90 10X2.5X226.5 | | O-RING, SIZE: 160 X 5.3, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: GB3452.1 160X5.3 | | O-RING, SIZE: 140 X 5.3, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: GB3452.1 140X5.3 | | RING, GUIDE, SIZE: 10 X 2.5 X 462, FOR DRAWWORKS, MODEL: JC40DB, MAKE: SICHUAN HONGHUA, P/N: KD22-90 10X2.5X462 | | SENSOR, FOR DEADLINE ANCHOR, MODEL: JZG34A, MAKE: HUBEI JIANGHAN, P/N: JZ400B.1.5 | | STUD, EQUAL LENGTH, M20X300, GRADE C, FOR DEAD LINE ANCHOR, MODEL: JZG34A, MAKE: HUBEI JAINGHAN, P/N: GB/T 953-1988 | | DIAPHRAGM, JZ400B.1.5 LOAD CELL, FOR DEAD LINE ANCHOR, MODEL; JZG34A, MAKE: HH, P/N: JZ250 | | HOSE ASSY, RUBBER, RIG HPU, FOR RIG HPU, MODEL: YZ094-TC, 51I-2200FL40(1-90) | | HOSE ASSY, RUBBER, RIG HPU, FOR RIG HPU, MODEL: YZ094-TC, 13I-2200J26C |
|
|
Telephone
E-MAIL