| Collar: Landing(Set) 750 Ton, PH100 (T) 30124872 |
| Pin: Bail 91060-500 |
| Bearing: Main Thrust, 750 Ton 30174374 |
| Bearing: Roller Taper 7.87 x 11.81 x 2.0 91242+30 |
| Bearing: Roller Cylindrical,10.23×18.9×3 91252 |
| Liner: Stem Upper Large Bore 112871 |
| Gauge : Sight Oil 74004 |
| Gasket: Rotating Head Assy 75981 |
| GASKET,EXHAUST,HEAT-EXCHANGER 77823 |
| Fitting: Grease, 1/8″-27 Npt 53201+50 |
| GASKET,GEAR,CASE {SET OF 4 PCS} 88588 |
| Bushing: Upper, Tds-8S/1000 88605-1 |
| BUSHING,LOWER 88606 |
| Seal Lip 89053-V |
| O-Ring,32 19Diax.275 90133 |
| Bushing:Bail Pin 91046 |
| Shim 0.002 91251-1 |
| Shim 0.003 91251-2 |
| Shim: 0.005 Bearing Retainer 91251-3 |
| Shim: 0.010 Bearing Retainer 91251-4 |
| Plug,Orifice .125 Npt 94042-23 |
| Orifice 94042-36 |
| Seal:Oil 94990 |
| Ring Labyrinth 98931 |
| Ring: Lock Internal Modified 99177+30 |
| SLEEVE WARE FOR TDS85SA 107138 |
| Pin: Taper, 0.34DIA x 2.25LG (5/Pk) 109717 |
| Seal: Poly Pak 112895 |
| Bearing:Flanged For Tds 112754-130 |
| Sleeve: Bushing 118844-20-24 |
| Bushing: Self Lubricating-124900 118844-22-12 |
| Pin:Hinge{Pipe Handler} Mdl:Tds11Sd19H40 119387 |
| Breather Filter Vents 129249-5 |
| Valve:Relief F/Tds For Top Drive Tds11S 141304 |
| Pin: Retainer, 1.0DIA x 4.6, MS15 30122165 |
| Shaft: Pivot Crank 30125031 |
| Pin: Hyd Cyl. Crank Link-Tilt 30171076 |
| Gasket: Spraybar Assy 30173429 |
| Dowel: Pin 51208-12 |
| Pin Dowel 51212-14 |
| PIN, DOWEL, TDS 51212-18 |
| Pin: Dowel 51216-24 |
| O-RING 51300-232-B |
| O-Ring 51300-240-B |
| O-Ring (30174447-Lh-Lb) 51300-276-B |
| Seal-O-Ring: Cover / Bearing Retainer 51300-277-B |
| O-Ring 51300-349-B |
| O-Ring 51300-392-B |
| O-Ring 51300-458-B |
| PIN, ROLL 51603-5-S |
| Pin: Yoke Link Tilt, Ph100 30177573 |
| Gasket: View-Port, Brake-Cover 30180046 |
| Isolater: Upper Bearing Large 30180916 |
| Ring: Retainer Internal Wh-950 30181343 |
| Seal Housing 91255-1 |
| Stem Sleve 94509-1 |
| Sleeve: Oval Compression, 1/8″ 94679 |
| Lockwire: 0.051″ DIA x 143FT, Canister MS20995C51 |
| Shaft: Gear Cluster 120691 |
| BEARING,ROLLER,CYLINDRICAL,5.12X7.87 88600 |
| Bearing: Roller Tapered 30116803 |
| WASHER,LOCK,BEARING,W26 88603 |
| NUT,LOCK,BEARING,AN26 88601 |
| RING,RETAINING,8.000BORE 97998+30 |
| Ring: Retaining Internal 97997+30 |
| WASHER,LOCK,BEARING,W28 88604 |
| NUT,LOCK,BEARING,AN28 88602 |
| Plug :Ext Pipe-Ctsk Hex 0.03Lb F/Tds11S 53000-6-C |
| O-Ring Kit Washpipe 4″ Bore 30182002-501 |
| Pin: Shot Rotating Link Assembly 10854484-003 |
| Stem: Rotating Link Adapter 124673-500 |
| Pin : Dowel (Psds) Mdl : Tds 11Sa 51216-12 |
| Ring: Piston 124806 |
| Ring Glyd Rotary 13.5″ Ph 100 124813 |
| Ring:Rotary Glyd 30119143 |
| Seal:Lower Gear Box 88096 |
| Screw:Cap Hex Hd 50016-24-C5D |
| Washer:Lock Item 26 F/Link Tilt Assy 50916-C |
| Seal:Wiper,Gear Ph100 30124656 |
| Ring: Retainer 124697 |
| Bushing: Rla 750T, Ph100 30124809 |
| Connector: O-Ring Boss 37 Deg 56529-8-8-S |
| Plug : O-Ring Boss Mdl : Tds 11Sa 56531-8-S |
| O-Ring:Stocking Line Mts 51300-278-B |
| O-Ring Stocking Line:Mts 51300-383-B |
| Ring Glyd Rotary 13″ Ph 100 30124812 |
| Ring: Thrust 30125258 |
| Pin Spirol, F/ TDS 51222-06-7 |
| Reliefe Valve 53250-5 |
| Pin Pivot, F/ TDS M614002540 |
| Shackle:Anchor 118868-6 |
| Wire Rope For Tds 11S 123059-2-9 |
| Seal Kit: F/ Hyd Cylinder 30171518-1 |
| Clevis: Rod Female 103141-9 |
| Latch: Panel Spark Arrestor Cover 80558-2 |
| Tape: Sealing, 25FT Roll 80560+30 |
| SCREEN,ARRESTOR,SPARK 80342+30 |
| Nut 51804-C |
| Nozzle: Spray Tds-4, 2.6GPM H1/4U-8030 88990-4 |
| Pin: Retainer, G/D Roller 86095-1 |
| Pin: Cylinder Alignment 30174809 |
| Cable Assy, Mtr Guard, Tds4S 112398-504 |
| Pin: Retainer (Painted Yellow) 111049-1 |
| Valve: Ball, Hi Pressure, 2-Pos. 3-Way 30172989-8 |
| Wire Rope, .125 – Sell As 2 Ft Minimum 94677 |
| Bolt: Swing Assy Tds-4 86176-501 |
| Bushing: Cylindrical 1.75 Id 71462 |
| Pin: Clevis 2.0 Dia, 17-4 87744 |
| Pin:Clevis 1.75 Dia X 5.8,17-4 87743 |
| Bushing: Cylindrical 2X2-3X8X2 87735 |
| VALVE,CHECK,.75NPT 82777+30 |
| TDS GASKET RETAINER PLT 76477-1 |
| Stem Screw 76478 |
| CUSHION,ACCUMULATOR 76479 |
| Valved Coupler: Quick Disc. Int. Pipe 55908-8-8-S |
| Coupling: Male 3/4″ Quick Disconnect 55909-12-12S |
| CAP, DUST 1/2″ 55915-8 |
| Cap: Dust-Plastic (Qd) 55915-12 |
| Plug, Dust Plastic 1/2″ Aero 55914-8 |
| PLUG, DUST 3/4″ AEROQUIP 55914-12 |
| Valved Nippled Quick Disc Int. Pipe 55909-8-8-S |
| Connector: O-Ring Boss 37 Deg 56529-6-6-S |
| Plug, Straight Thd Hex W/O Ring 87196-2-S |
| Plug, Straight Thd Hex W/O Ring 87196-4-S |
| Plug,O-Ring .562-18 Thd 87196-6-S |
| Plug,O-Ring .750-16 Thd 87196-8-S |
| Fitting:Test Sea 4 Phm 31, F/Tds-9S 93024-4SAE |
| Fitting:Test Sea 4 Phm 31, F/Tds-9S 93024-6SAE |
| Cartridge Check Valve Pilot To Open Tds 93547-2D30N |
| Cartridge: Valve Relief, PHM3I 94522-2AN |
| Valve Cartridge Needle 94535-1DN |
| Valve:Check F/Tds-9S 94536-230N |
| Valve Cartridge Needle 97631-2BN |
| Cartridge Valve Balanced Logic 117851-20HN |
| Washer: Flat, 2.38 x 4.0 x .25 107284 |
| Roller Bearing 76771 |
| NUT,HEX,JAM,2.0-12UN 80569+30 |
| Washer: Lock-Hi Collar 51132-C |
| Connecter: External Pipe / 37 Deg 56501-4-4-C |
| O-Ring 51300-214-B |
| Valve: Cb Cartridge 94518-23HN |
| Washer:Lock Regular 50906-C |
| Plug: Orifice, .031(PRS8) 94041-08 |
| Seal Kit F/ Rod Cylinder 108894-G20 |
| Seal: Piston Hi-Load 108894-P50 |
| Seal: Body For Tds 11Sh 108894-B50 |
| Clevis: Female Rod 87609 |
| Valve Solenoid 4/2, 24Volt DC Eexd 112554-D2 |
| Valve: Directional Control 110538-4 |
| Cartridge: Logic Valve 117851-3KHN |
| Gauge:Pressure Hyd 3000 Psi Tds 80630 |
| Valve: Po Check 93547-2B75N |
| Valve:Pressure Reducing/Relieving F/Tds3 77615 |
| Valve Cartridge 94522-21N |
| Tube: Assy Manifold 30171884-500 |
| Tube: Assy Manifold 30171884 |
| Plug,O-Ring 87196-10-S |
| PLUG, O-RING 1.062-12 THD 87196-12-S |
| Orifice 93018-08 |
| Filter Element:Hyd. 82749 |
| Seal:Filter Element 85616 |
| Seal Kit 82674-SK |
| Bushing:Sleeve 2.5 X 3.0 X 2.0 Lg “Scd” 85887 |
| CLAMP, HOSE 15015+30 |
| Bushing: Thermowell ” Scd” 83859 |
| Valve: Thermostatic 3-Way 97575 |
| Dp Gauge 30176001 |
| Thermometer: 3″ Dial 0-200 Deg 30177032 |
| Thermowell: Noshok 30177031 |
| Elbow: Connector Modified Orifice 30177241 |
| Indicator: Vacuum 30176000-1 |
| Valve: Ball 1″ NPT Female, Brass 108216-16 |
| Gauge: Pressure 115217-1D0 |
| Gauge: Pressure 115217-1F2 |
| Plug: SQ HD Magnetic 53003-32 |
| Kit: Filter, Gear – Oil 30111013-KIT |
| Element Filter 25 Micron Schroeder 30175768-1 |
| O-Ring F/Tds Lube Oil Filter 30156633-10 |
| Pump: Screw Rotary 30156301-4 |
| Valve: Solenoid EEXD 3-Positions, 24Vdc 112554-J2 |
| Screw, Cap Socket Head 10490366-739 |
| Washer:Lock Regular 50903-C |
| Valve: Counterbalance External-Drained 109655-13 |
| Plug, Cavity (93667-M11) 93667-M11 |
| Cartridge:Valve Cart Check F/Mdl.Bx-4-50 107029-175N |
| Cartridge : Cxda-Xcn For Mdl : Bx-4-50 94536-130N |
| Catridge:Logic Phm31 F/Ibop Actuator 94534-1CXN |
| Valve:Control Balance 94518-13HN |
| Nipple, Straight 128694-6-031 |
| Plug:Orifice 10-32 X .055 Mdl:Ps350/500 93018-14 |
| Eye Bolt 3/8 X 11/4, 9900208 116699-6 |
| Reducer, 8 To 6 Sae O-Ring 56556-8-6-S |
| Connector: O-Ring Boss/37 56529-12-12S |
| Valve, Check In Line 30157932-06-25 |
| Connector, O-Ring Boss / 37 56529-8-12-S |
| Reducer: O-Ring Boss 56556-4-6-S |
| Cartridge: Valve Counter Balance 109655-10 |
| Adaptor: Sae To Jic, 1/4″ To 3/8″ 56529-4-6-S |
| Tee: 37/37/O-Ring Boss 56530-6-6-S |
| Reducer Int Mdl: P21 56517-6-4-S |
| Gasket: Motor Inlet F/ Tds-3 76649 |
| Clamp: Hose, 2.5-12.25 78801 |
| GASKET,BLOWER 81780 |
| TDS-3 GASKET BLOWER OUT 76651-2 |
| Bushing: Split Taper 42MM 80036-4 |
| Washer: Lock 50912-C |
| Pipe: Rubber *SCD” 93563 |
| Screw: Cap Hex Head Drilled 50012-20-C5D |
| Gasket 78802 |
| CLAMP,HOSE,FLEX,10″ TDS 107588-1 |
| Plug: Ext Pipe-CTSK HEX 53000-12-S |
| Seal: Ring Piston 108894-C50 |
| Regulator Air 0-15 Psi With O Gage Tds 30173401-2 |
| Gage Pressure 2.5″ Liquid- Filled No-Sho 115217-1A2 |
| Spring:Back Up F/Torque Arestor Assy 110083 |
| Pin:Secondary Retention Dia1.0 30172723-1 |
| Pin:Secondary Retention Dia1.0 30172725-1 |
| Bushing Sleeve 1″ X 1/2″ Fiberglide 118844-16-08 |
| Bearing:Self Lube 118844-16-12 |
| Bearing:Self Lube 118844-22-22 |
| Washer: Lock 50908-C |
| Cable: Lieft Cylinder 30125583 |
| Clip: Wire Rope, .375, PH100 30125629 |
| Bushing Sleeve Fibergkid 118844-12-16 |
| Pin:Secondary Retention, .75″Dia.,PH-100 30172724-1 |
| Pin Roller 51604-6-C |
| Pin:Secondary Retention Dia1.0 30172725-2 |
| Roller: Cam Trq-Wr F/ Top Drive 71847 |
| Washer: Lock-Tab, PH-100 30173900 |
| Nut:Hex Slotted 50514-C |
| PIN SECONDARY RETENTION 30172726-1 |
| Plug: Orifice, 2.0MM 93020-20 |
| Thimble: SST, 3/8″-Rope, PH100 30126622 |
| Sleeve 131085-024 |
| Bushing 30184320-502 |
| Pin Hinge 30178847 |
| Ring:Retaining Cylinder Head Rw60 11085 |
| Seal: Piston Clamp Cylinder Tw60 72219 |
| Seal: Rod Clamp Cylinder Assy- Top Drive 72220 |
| Wiper:Rod F/Clamp Cylinder Assy 72221 |
| KEY, .50 SQUARE x 2.8, 1018 STL 16532+50 |
| Liner Stabilzer 30125012 |
| Screw Hex Head 117989 |
| Nut:Hex Slotted 50516-C |
| Pin For Varco Tds 51403-14-S |
| Pin,Clevis,05/16 X2.5 Long F/ Varco Tds 56405-20-C |
| Spring:Die Dual 79179 |
| Shoulder Bolt: Modified F/ Clamp 30177109-04 |
| Screw: Soc Hd Cap 50108-10-C |
| Washer: High Cooler 51108-C |
| Split Ring , Ss F/ Varco Tds 30178854-05 |
| Pin: Cotter 51402-8-S |
| Bolt, Stand-Off M614004316 |
| Washer: Flat [Old Pn: 939370-17] 50816-N-C |
| Screw:Cap Hex Head-Drilled 50008-10-C5D |
| Screw : Cap Hex Drilled Head, UNC 50012-16-C5 |
| Washer: Lock Regular 50905-C |
| Nut: Hex Slotted Mdl: Tds 11Sa 50508-C |
| Ferrule 51219-2 |
| Cable Retaining Tds-11Sb16M204 51220-2 |
| Eye bolt: Shouldered P614000124-06-10 |
| Cable: Assy, PH100 M614003360-1 |
| Shackle: Anchor 118868-2 |
| Valve:Check Pilot-To Close F/Tds-9S 94537-130N |
| Valve:Fixed Flow Control F/Tds-9S 109302-130NC |
| Valve: Directional Control Pls5/Mhh 110538-R4 |
| Flange: Protector 107303-1-8 |
| O Ring 51300-210-B |
| Cartridge: Logic Ph100 117851-1KHN |
| Lug:Cavity 93667-M13 |
| Plug: Cavity, PHM3I 93667-X11 |
| Elbow: O-Ring Boss 37 Deg Mdl : Tds11S 56519-6-6-S |
| Lockwasher: Hi Coil Spring 51103-C |
| Screw: Cap-SOC HD (UNC) 50103-8-S |
| Elbow: O-Ring Boss 37 Deg 56519-8-8-S |
| Die:Tong Pyramid Type 1/2″X1-1/4″X 5″ 16401-2 |
| Bolt: Retainer Jaw 0.5 X 6.5 30122112 |
| Pin: Cotter, 1/8 x 2, Stainless 51402-16-S |
| Cartridge, Valve Check 93548-1S30N |
| Ids3 Cartridge Prv 97631-1AN |
| CAP, FEM 37DEG SEAT 56544-8-S |
| Sun Shuttle Valve Cartridge 94521-1DN |
| Check Valve 94537-175N |
| Seal Kit 870182 108894-P25 |
| Piston Seal:Set For Tds/Power Swivel 108894-L25 |
| Rod:Seal & Gland 108894-G13 |
| Seal Kit:Body (For 118312-Cyl) F/Ar3200 108894-B25 |
| Seal Rod & Gland 108894-G10 |
| Guide: Arm For 5″ Tds-3 76442 |
| Guide: Spring F/ Top Drive 76443 |
| SCREW: CAP HEX HEAD TDS 50008-13-C5D |
| Washer: Flat Narrow 50810-N-C |
| Pin : Stabbing Guide Assy 76398 |
| Pin: Cotter For Tds 11 Sh 51402-10-S |
| Screw: Cap Hex Drilled, M20 x 2.5, Class 125092-1 |
| DRUM,BRAKE 77302 |
| Die: Retainer Nc50 Ph100 30124935 |
Telephone
E-MAIL