| ROD, PISTON MUD PUMP TRIPLEX NATIONAL – MFG : MIS – P/N 1292147 |
| LINER, CERAMIC 6-1/2″ FOR EMSCO FB1300 – MFG: MIS – P/N 7499650 |
| SEAL, O-RING SEALING FOR PULLER VALVE SEAT NO. 1290259 – MFG: SW – P/N SWTM1717 |
| SPRING, VALVE – MFG: SOUTHWEST – P/N SW5710-110 |
| SPLASH GUARDMFG. MFG: SOUTHWEST P/N 80491292 |
| STEM, 2IN CENTER 36 IN LONG FOR HYD JACK SEAT PULLER ASSY – MFG: SW – P/N# SWTM1702 |
| SEALLSPE107.29.110.18 – MFG: LSPE – PART 107.29.110.18 |
| 6″ ZIRCONIA LINER (CERAMIC LINER) F/ NAT 14P220/W2214/W2215 |
| CROSSHEAD, – MFG : NOV – P/N 6316-0022-00 |
| PLUG,CYLINDER HEAD, AT DRAWING NO. 107.29.110.00 MFG: LSPE PART NO ENP000017G108G |
| BUSHING,LINER;STUD W/ NUT MFG: SOUTHWEST OILFIELD PRODUCTS INC.P/N SW-4018-62 |
| CAPSCREW, F. H. – MFG : SW – P/N 401698 |
| INTERMEDIATE RODLSPE107.29.30.08 – MFG: LSPE – PART 107.29.30.08 |
| GASKET, LINER 6 IN – MFG : MIS – P/N 7923261 |
| LINER, 6″ SUPREME, HP STYLE, TRIPLEX PUMP 12P160 – MFG: MIS P/N 05466600HP – OR – TS025960HP -OR- MFG: SW – P/N 1376G5 |
| HEAD: PULLER, SEAT, SPLIT JAW, API 8 MFG: SOUTHWEST OILFIELD P/N# SWTM48-SN |
| RUBBERS REPLACEMENT, PISTON SUPREME SIZE 6″ – MFG: NAT – P/N 15180268 |
| P/N 1560702, Valve spring |
| WRENCH, TORQUE MICROMETER 1 IN DRIVE 140 FT-LB-700 FT-LB – MFG: PROTO / GRAINGER – PN: J6022B / 426F19 |
| LINER, MUD PUMP, 6-1/2 IN ZIRCONIA CERAMIC, MFG: SOUTHWEST – P/N# 6380ZIR7 |
| GASKET, LINER 6″,URETHANE – MFG: SOUTHWEST – P/N 29305U – MFG : NOV – P/N 7211004 |
| SR, TO COVER COST OF REPAIR & RETURN DISCHARGE MODULE FOR MUD PUMP |
| RING : SUCTION SEAL BACK UPMFG: WeatherfordP/N# 1249975 |
| SUCTION MODULE STUDDED ONLY SW STYLE 7500 PSI F/ NAT 14P220 |
| LINER, 6-1/2″, SUPREME, HP STYLE, FOR 12P160 MUD PUMP, NATIONAL OILWELL, MISSION – MFG: NOV – P/N 05466650HP – OR – MFG: SW P/N1376G7 |
| 7″ STEEL LINER F/ NAT 12P160, P/N 1376G9 |
| R44 SS316 RING JOINT GASKET, P/N R44SS316 |
| DISCHARGE MODULE (STUDDED ONLY) MFG: SOUTHWEST P/N 8476-51D |
| LOCKING WEDGE ASSEMBLY (CONSIST OF 6-WEDGES AND 1-SPRING) MFG: SOUTHWEST P/N 80971292 |
| PULLER, VALVE SEAT HYDRAULIC VALVE SEAT LIFTING TOOL MFG: BOMCO P/N AH130101160600 |
| LINER, 7″ 12-P-160 MUD PUMP MFG:SW P/N 1376ZIR9 |
| FLANGE, THREADED VALVE COVER SOUTHWEST – MFG : SW – P/N 4476 |
| SUCTION MODULE (STUDDED ONLY) MFG: SOUTHWEST P/N 8476-52S |
| LINER, 5-1/2″ – MFG: EMS – P/N 05499550HP |
| P/N 012180535, 6 1/2″ piston compelete for Mud pump 12-P-160 |
| O-RING 190 X 3.55 (GB3452.1) – MFG: BOMCO – P/N 530301011900035000 |
| PISTON, MUD PUMP DUAL DURO 6-1/2 IN WITH 1-5/8 IN BORE WITH 1-1/2 IN BUSHING – MFG : FSPD – P/N # 924046414 |
| P/N 012180337, 5 1/2″ mud pump piston 12-P-160 |
| 5-1/2″ STEEL LINER F/ NAT 14P220/W2214/W2215 |
| P/N M1098, Split Jaw Puller Head for Valve Seat for Mud pump 12-P-160 |
| P/N 1292141, INSERT,VALVE Guide |
| PINMFG:- PQOP/N# 30000700 |
| 6″ STEEL LINER F/ NAT 14P220/W2214/W2215 |
| SEALLSPE107.29.110.17 – MFG: LSPE – PART 107.29.110.17 |
| GUIDE ASSEMPLY, UPPER CROSSHEAD – MFG : NOV – P/N 6316068700 |
| VALVE COVER STUD (WITH SW PART HHN1500-6 1-1/2″-6 HEAVY HEX NUT) MFG: SOUTHWEST P/N 4015-57 |
| LINER, 5″ FOR MUD PUMP F1300 TRIPLEX PUMP MFG: LSPE PART 107.35.110.29 |
| GASKET, SUCTION MANIFOLD – MFG: SW – P/N AJO419R |
| SEAL, SPACER DISCHARGE FLANGE SW – MFG : SW – P/N 29763 |
| P/N 1560985, G2 Valve complete (API7) with polyurethane Disc for 12-P-160 mud pump |
Telephone
E-MAIL